@truscellino
try these settings on the tweaks page
29676
ronnie
+---+
|Filename: piCorePlayer sabre dac power switch pins.png |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=29676|
+---
paul- wrote:
> Are you guys running LMS8? LMS8 forced the use of https for
> connections to mysqueezebox. Which is why I added a date validation
> check on LMS startup. But if your system does not get a valid date in a
> reasonable amount of time, that could be causing the problems.
I am ru
Tried in-situ from 5 to 6 again - this time I used extension manager to
removed pcp-bt.tcz
It appeared to work ... but ... some things fail (e.g. SSH not enabled
and LMS does not start).
I think this is because the system startup process fails to remount the
boot partition so it does not find the
Tried an in-situ upgrade from v5.0.1 to 6.0.0.
Unable to connect afterwards. I was using wireless. Havent tried with
cable yet. Seem to recall that all other in-situ upgrades has gone
perfect earlier?
bambadoo's Profile:
See my message that is immediately before yours.
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105
View this thread: h
paul- wrote:
> Unfortunately, there is nobody working on the pi RT kernel. All I can
> do is apply the mainline RT patches.they apply cleanly most of the
> time. I dont have much time to even do testing for that kernel, of my
> 10 players running today, none are using that version.
Non-
d6jg wrote:
> Dont Stop The Music is built in to LMS and is a per player setting.
> LastMix is a plugin designed to work with it.
>
>
> Sent from my iPhone using Tapatalk
Thank you so much for this suggestion, that's an awesome plugin. I have
LastMix picking up from LastFM. I had recently upd
So the original installer of our house system, installed before I owned
the home, used wire nuts to connect multiple speakers together and it's
a bit ugly. Below you can see my current clean-up situation.
29677
I am thinking of either using terminal blocks to clean it up or phoenix
contact wit
Hi All
Many thanks for the new official version 6 which is working well on my
RPI 4.
One small thing I've noticed, when I change the name of a player in LMS
settings I find that the name doesn't stick once I reboot LMS. The name
reverts to whatever it was before. Not a big deal but I don't rec
Had to make a new install on a different microsd card. However
squeezelite does not start when using the same overlay as earlier. Have
to use a generic type. I have a soekris dam1021 i2s direct. Unable to
make 352,384 khz samplerate work which worked like a charm on v5.0.0.
It also hangs when t
Is it just me or is there a problem with the pcp-jivelite_hdskins.tcz
file?
md5sum of the downloaded file is ff34fb5f141b59ea522264c0569bfab9
pcp-jivelite_hdskins.tcz.md5.txt says it should be
363f701de0b03b3feb77850ebec14d5f so at the moment I cannot install
Jivelite.
-
I would like to have the precompile files. Thanks!
anadigi's Profile: http://forums.slimdevices.com/member.php?userid=65102
View this thread: http://forums.slimdevices.com/showthread.php?t=111790
_
Man in a van wrote:
> @truscellino
>
> try these settings on the tweaks page
>
> ronnie
Yes - this works now. Thank you - much appreciated!
Marc
truscellino's Profile: http://forums.slimdevices.com/member.php?userid=6
Hi everybody
I use Picore and a Hifiberry DAC and it all works fine.
I don't know how ALSA works.
Is it possible to see the mixer on the monitor (webbrowser or Pi-monitor
does not matter).
And if 'yes' how do I do this.
Thanks
Peter 2
paul- wrote:
>
> Includes support for RPi4B boards, including new v1.2 boards.
>
Congratulations on this new version !
Without surprise al my players had the flawless insitu upgrade to the
new version , like you planned it to be ( except that tiny one :-) )
One question though, you specific
Paul Webster wrote:
> See my message that is immediately before yours - it explains why SSH
> connection does not work (and LMS might not start).
> Would not explain more general problems though.
>
> You might have to plug in a screen and see what it shows when booting.
You can try to manually
M-H wrote:
>
> What did piCore or the piCoreplayer team do to get this board revision
> supported ?
>
We just maintain a board revision table. Its mainly for board
diagnostics and a few functions rely on knowing the board. We could
read it all from device tree, but the table is just easier
rotating the display makes one change to the config.txtthat's it.
Unless your card is getting destroyed when making that change, the two
are not really possible to cause the interaction you mention.
But if you want some validationcopy and post the config.txt before
and after.
piCoreP
Peter2 wrote:
> Hi everybody
> I use Picore and a Hifiberry DAC and it all works fine.
> I don't know how ALSA works.
> Is it possible to see the mixer on the monitor (webbrowser or Pi-monitor
> does not matter).
> And if 'yes' how do I do this.
> Thanks
> Peter 2
Press the Card Config button o
paul- wrote:
> You can try to manually pull down copies of the extensions that it was
> complaining about. 5 and 6 use the same repo but some extensions
> have been updated.
My issue (mount not working) appeared to be the result of there being an
incompatibility between libmount and mount
20 matches
Mail list logo
