That is the streamer function in pCP 6 - so you appear to be going
down the right path.
Probably best to take a look at the first post in the forum thread that
is dedicated to pCP 6 and Bluetooth and post follow-up questions in that
one.
https://forums.slimdevices.com/showthread.php?111972-piCo
Hi again,
would it be possible, through a clever combination of the PCP 6,
bluetooth and the appropriate plugin to stream any sound from a
bluetooth device (smartphone) to the Squeezebox players?
I have managed to configure PCP as a streamer and the stream runs in a
web browser.
So far so good.
On the SB Controllers in the Advanced menu under networking there is a
"Choose Network" routine. Is that something that could be added to
pCP/Jivelite?
Howard
Howard Passman's Profile: http://forums.slimdevices.com/membe
Hi MW_FFM2020,
/etc/asound.conf has rw permission for group staff, so tc will have
permissions to edit the file.
Code:
tc@piCorePlayer:~$ la /etc/asound.conf
-rw-rw-r--1 root staff 578 Jun 7 01:29 /etc/asound.conf
tc@piCorePlayer:~$ vi /etc/as
ralphy wrote:
> Confirm that the pointercal file is listed in /opt/.filetool.lst
>
> usr/local/etc/pointercal
>
> If not, add it, run the calibration again then backup the pcp config.
okay, the pointercal file is listed in /opt/.filetool.lst and usr /
local / etc / pointercal.
I went through
LittleToast wrote:
> I reformatted the fat32 256G drive to exfat. It works. Need not extend
> usb wait time. I tried that to 10s and without reformatting to exfat it
> does not work. Just reformatting to exfat works with just the default 2s
> in usb wait time. 👍
Perfect!
*Home:* VBA 4TB (2.5
I reformatted the fat32 256G drive to exfat. It works. Need not extend
usb wait time. I tried that to 10s and without reformatting to exfat it
does not work. Just reformatting to exfat works with just the default 2s
in usb wait time. 👍
---
ralphy wrote:
> Confirm that the pointercal file is listed in /opt/.filetool.lst
>
> usr/local/etc/pointercal
>
> If not, add it, run the calibration again then backup the pcp config.Thanks,
> I'll will try that tomorrow.
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk
--
LittleToast wrote:
> Thanks for explaining. I see. Ok. I will try to find the tweak for the
> mounting time if I can. I can try to format it to exfat. See if it
> works. I will get back.
it's buried somewhere in the piCorePlayer webGUI under one of the menu
items.
*Home:* VBA 4TB (2.5) -or-
garym wrote:
> just waiting for it to mount will never work if there's not enough time.
> piCorePlayer will try to mount the USB disk and if it doesn't mount in
> the default time (I think 2 seconds), it skips it and never tries again.
> That's why you need to manually change the seconds waited
LittleToast wrote:
> Hi. I am using a Magna Mano player. All 4 usb slots are not blue, but
> black - probably usb 2.0. Yes, I followed the instructions from the link
> you shared. I have waited a long time (say 10-15 min), and yet
> picoreplayer's webUI under "LMS" could not see the usb stick (f
Hi Paul,
With piCorePlayer you can set the screen brightness.I've set it to about
50% which is fine and the under-voltage warning never comes on after the
boot.
Howard
Paul Webster wrote:
> Does it matter much that it reports under voltage during booting?
> My guess is that it OK and you cou
Thanks Paul. The display does pull power from the 40 pin header. I use a
Y cable in the house on a touch display I have, so I may go that way. It
may be a space issue.
I did a little checking and it may be that the adapter is the issue. I
need to look at that some more.
Once it boots, it's all
garym wrote:
> is it a rPi4B (so it has the "blue" USB 3.0 slots?). If so, try one of
> the NON USB 3.0 slots instead. I assume you've mounted the USB stick
> following the instructions here for adding a USB drive (and if so, the
> drive shows as mounted in the picoreplayer webGUI. You might n
Does it matter much that it reports under voltage during booting?
My guess is that it OK and you could put a script in place to reduce
brightness after the boot.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
supla finland, abc
is it a rPi4B (so it has the "blue" USB 3.0 slots?). If so, try one of
the NON USB 3.0 slots instead. I assume you've mounted the USB stick
following the instructions here for adding a USB drive:
https://www.picoreplayer.org/how_to_add_usb_hdd.shtml
*Home:* VBA 4TB (2.5) -or- rPi4B/pCP6.0/4TB
Hi,
I am a new user to the Picoreplayer, having previously used volumio with
LMS as a plugin.
For the Picoreplayer, I am able to get music streaming and airplay to
work. But Picoreplayer is not able to see my usb stick (FAT32, 256G,
works well with volumio via LMS plugin). I tried to follow al
First you must disable IR remote control in the web tweaks tab and
reboot before proceeding.
Next, install pcp-lircd from the extensions webgui. Reboot if needed.
Next, ensure squeezelite is stopped.
Code:
sudo /usr/local/etc/init.d/squeezelite stop
-
Looking at the driver, its hardcoded at 255, there are no provisions to
decrease it until after booted.
How are you wiring the display. You should not get the power from the
RPI 40pin header, it's best to put a "Y" cable on your incoming power,
piCorePlayer a small player for the Raspberry P
O.K. you guys know me. Always trying to do something above my abilities.
So I installed a pi3B with a 7" screen in my car. It's a lease so I'm
not hard wiring the power to it, but pulling it off the lighter with an
adapter. My problem is, when it boots, there is an under-voltage issue.
Once it's
found the "save"-option, but on reboot it asks for language and skin
again. 8-(
on the jivelite touchscreen: settings - picoreplayer - save on SD-card
is there another option to save settings for jivelite?
Or have I to change my startup-command?
---
You need to save your settings so they survive a reboot.
You do this from the picoreplayer menu from within jivelite, something
like "save to sd-card," if remember correctly
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: 'https://www.picoreplayer.org' (https://www.picorepl
Hi friends,
with help of this thread I got my 7" Touchscreen working.
1. Calibrated the touchscreen.
2. disabled autostart of jivelite
3. added user-command
Code:
sudo SDL_VIDEODRIVER=fbcon SDL_FBDEV=/dev/fb0
TSLIB_TSDEVICE=/dev/input/event1 SDL_MOUSEDRV=TSLIB /opt/jiv
Confirm that the pointercal file is listed in /opt/.filetool.lst
usr/local/etc/pointercal
If not, add it, run the calibration again then backup the pcp config.
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio
'Squeezebox client builds'
(https://sourceforge.net/projects/lmsclients/fil
MW_FFM2020 wrote:
> :confused:
>
> What do you mean? Which Username and password do I need?
I use nano (there is an extension to install it)
user tc
passwd piCore
nano /etc/asound.conf
Man in a van's Profile: http://f
paul- wrote:
> No password is needed for sudo
:confused:
What do you mean? Which Username and password do I need?
MW_FFM2020's Profile: http://forums.slimdevices.com/member.php?userid=70485
View this thread: http://foru
Hi Paul,
Many thanks for your comments. I had a look for the dongle you
suggested. One thing I noticed, is that it doesn't feature the same kind
of large external antenna that some others have, EG the one I had found.
So will this offer a significant boost to wifi reception over the Pi
Zero W's
No password is needed for sudo
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHoste
I've sent you a PM with a download link fo my "test library". (I choosed
it 'cause I'll need to do adjustments to my main library before
completly migrating to linux LMS and I'ts quite a bit of work which I
don't have the time to at the moment. And it's constantly changing
anyway so for sure will
I hadn't used it as an LMS player for some time, but this morning I
tried stopping Squeezelite, no diff. Then I restarted the BT Speaker
daemon, no diff.
Then I mptced that the tablet Device pairing said Connect, so I did a
connect and then it came up on the tablet as connected and active!
Then i
I'm working on a multiroom audio system based on piCorePlayer on
Raspberry with Hifiberry amps. It seems to bee possible to split an
stereo output into two mono outputs (found on the hifiberry homepage).
To configure this I have to edit the etc/asound.conf. I'm not able to
edit the asound.conf wi
hi folks, happy August!
updates coming this weekend for 0.4.50, will include:
- 12/24 clock modes
-
- all-in-one visualization fixes, screen resets, scroller mods
-
- command line changes, code cleanup inclusive a much
improved/intuitive command line; more details to follow
-
- potenti
doggod wrote:
> One thing I've found out is that the trackstat URL's in LMS actual
> database is encoded as win 1252 in Win and UTF-8 in LMS linux.
>
Not only Trackstat's, all URLs (LMS' library will have the same issues
if you switch encoding)
>
> Should I send you my smaller "test library"
33 matches
Mail list logo
