What about converting the documentation from fixed web pages to a wiki?
That could allow the admins to spread the maintenance over lots more
people, relieve the coders of a bit of work, and likely keep things more
up to date than can sometimes be the case.
http://forums.slimdevices.com/showthrea
I put the CACHE on the drive with music files. But many people report
keeping it on the SD card with no problems with years of use
That's me. Three or four years, I don't know. IMHO SD cards are by far
good enough for the average user not to have to go through the
additional hoops of confi
kidstypike wrote:
> Who hosts these webpages
> https://www.picoreplayer.org/how_to_install_lms.shtml ?
>
> Isn't it about time someone got off their arse and changed 300MB to
> something more realistic?
What about converting the documentation from fixed web pages to a wiki?
That could allow th
garym wrote:
> I put the CACHE on the drive with music files. But many people report
> keeping it on the SD card with no problems with years of use
I have put my LMS cache on the SD card so that I can back up the whole
card on my PC. I'm a bit of an enthusiast for backup copies of valuable
No one likes doing documentation.
As piCorePlayer is not a commercial product there is really no incentive
to do the hard slog and keep the documentation current. I think
technical people, given the choice would rather code than document. I
certainly would.
Documentation is important, I know th
Tony T wrote:
> Is it preferable to place the CACHE on the SD Card or the drive with the
> Music files?
> I always think it better on the drive as there would be no writes to the
> SD Card.
I put the CACHE on the drive with music files. But many people report
keeping it on the SD card with no p
Is it preferable to place the CACHE on the SD Card or the drive with the
Music files?
I always think it better on the drive as there would be no writes to the
SD Card.
Tony
SBTouch ♪ SBRadio ♬
Tony T's Profile: http://
Dear Squeezebox community,
I have a few question about the possibility to customize RF remote
control keys in piCorePlayer. But let me start with describing my pCP
setup.
I built a Squeezebox player using a Raspberry Pi ZeroW board in
combination with piCorePlayer. I can control pCP with a smar
hi Matthias,
Maybe, if you only want to set piCorePlayer to mono??, there is a "beta"
tool to play around with asound.conf.
[Main page] > [Extras] > [Asound] (I think, I don't have a pCP6.1.0
setup at the moment)
I haven't played with it for a long time, but it should give you some
ideas.
reg
That tutorial is a bit misleading, as it is based on upgrading form a
previous version to Ubuntu 20.04.
On a fresh install you do not have to edit any init'd scripts, you just
need to 'sudo systemctl enable logitechmediaserver'
You can install any version after downloading the appropriate .deb
Wigster wrote:
> Now, the basic keys work ok (power, play, pause, shuffle, repeat,
> vollume up/down). However, as far as I can tell, KEY_NEXT and
> KEY_FORWARD have exactly the same actions: they move to the next track
> in the currently playing playlist. Same goes for KEY_BACK and
> KEY_REWIND
Thank you very very much. Now all right.
WadDad's Profile: http://forums.slimdevices.com/member.php?userid=64557
View this thread: http://forums.slimdevices.com/showthread.php?t=112460
Yes, you will need two squeezelite instances running. Which you will
have to manually manage, as pCP only handles one instance internally.
In the hifiberry example the second squeezelite instance would use
"card2" as the output.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homep
I am trying to install LMS on ubuntu 20.4, on my raspberry pi4.
Installation is ok with this "tuto" from askubuntu
I can't open the webbrowser
i haven't modify yet the init.d script...
do you have some experience with this?
thanks
Mostly the problem is sitting in front
Anyway, I cant get a dual mono output. Do I need to declare a second
instance?
MW_FFM2020's Profile: http://forums.slimdevices.com/member.php?userid=70485
View this thread: http:/
paul- wrote:
> You can re-run the resize at anytime. You can go larger, but never
> smaller.
Thanks, just resizedeasy (and for others, note you can see before
(and after) you resize what size you chose, in case you can't recall
from the original setup.)
*Home:* VBA 4TB (2.5) -or- rPi4B
What you changed was a file on a Ramdisk. That change will not survive
a reboot without performing a backup.
Run backup from the main menu on the web interface, or run `pcp bu`
from commandline.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.or
You can re-run the resize at anytime. You can go larger, but never
smaller.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2
Greg Erskine wrote:
> Thanks for your suggestion!
>
> BTW: 300MB has always worked for me.
Is it possible to expand the card larger than 300MB using the
picoreplayer webGUI *after the fact* without redoing the picoreplayer
setup?
*Home:* VBA 4TB (2.5) -or- rPi4B/pCP6.0/4TB>LMS 7.9.3>Transpo
Thanks for your help. I installed the nano editor and changed the
asound.conf but after reboot, the "old" asound.conf was loaded.
Is there a possibility to configure the hifiberry AMP2 into dual mono
streams?
MW_FFM2020's
Perfect! I just had the idea of setting up my FLIRC again and here is
the guide. Thank you!
So I managed to get it to work with my old Squeezebox remote, through
FLIRC into PCP6.1 in the way that you have described.
Now, the basic keys work ok (power, play, pause, shuffle, repeat).
However, as
You could try booting with Raspbian/Raspberry Pi OS following the
suppliers guide and see if the problem still exists - which could make
them more likely to accept a replacement request without question.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio f
Greg,
Thank you for your swift answer, I have tried again and it worked.
MrBogus's Profile: http://forums.slimdevices.com/member.php?userid=70502
View this thread: http://forums.slimdevices.com/showthread.php?t=112704
__
Hi Paul,
thank you for the reply. I did a reboot via the PcP interface. Nothing
changed.
I decided to redo all the process from the beginning with a new card.
Same issue with the display and now the buttons are not working anymore
(actually just the Y button - I changed the 20 to 24 but still
Greg Erskine wrote:
> Thanks for your feeedback.
>
> 1. We do have this message on the [Main Page] [Static IP] more help and
> on the static IP page "The recommended method to set a static IP address
> is to map the MAC address to an IP address in your router."
>
I must have overlooked that o
Sorry, my fault. I should have tested the script before posting it. I
only tested that the check for the power state is working as expected.
I have added the missing "fi" into the script and fixed a typo of a
variable in my post #33.
---
The main reason I do not go for full capacity is (was) to make it easier
to copy partitions between SD cards to make backups.
I had found in the past that 2 different 4GB cards had a different
amount of real capacity and I could not copy the bigger 4GB to the
smaller 4GB.
Turned out to be a shor
Paul Webster wrote:
> I assume that page started life as pCP as a player only.
No, it was drawn up specifically as a guide to setting up pCP as an LMS
server, by a forum member, I forget who it was, but it can be found in
these fora.
*Server - LMS 8.0.0 *Pi4B 4GB/Flirc case/pCP 6.1.0 18K lib
Isn't it about time someone got off their arse and changed 300MB to
something more realistic?
Thanks for your suggestion!
300MB has always worked for me.
I'd vote for full size, too. 300MB is not enough in many cases. In
particular if you're using my Music and Artist Information plugins with
I assume that page started life as pCP as a player only.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
supla finland, abc australia, cbc/radio-canada and rte ireland
-
Greg Erskine wrote:
> Thanks for your suggestion!
>
> BTW: 300MB has always worked for me.
And your LMS cache folder (slimserver) is on your SD card?
300MB wouldn't work for me.
31194
+---+
|Filename: slimserver.jpg
kidstypike wrote:
> Who hosts these webpages
> https://www.picoreplayer.org/how_to_install_lms.shtml ?
>
> Isn't it about time someone got off their arse and changed 300MB to
> something more realistic?
Thanks for your suggestion!
300MB has always worked for me.
Or highlight that the number needs to be big if LMS database is held
there.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
supla finland, abc australia, cbc/radio-canada and rte ireland
--
https://www.youtube.com/watch?v=H8OFao9i6RQ
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=111787
___
Greg Erskine wrote:
> Thanks for your feeedback.
>
>
> 3. If you are not going to use the SD card for anything else its
> probably easiest to expand to use the full SD card.
Who hosts these webpages
https://www.picoreplayer.org/how_to_install_lms.shtml ?
Isn't it about time someone got off t
35 matches
Mail list logo
