The package has no been updated correctly. Somehow I crossed up my
aarch64 and arm binaries.
Code:
Logitech Media Server Version: 8.2.0 - 1627922070 @ Tue Aug 3 11:43:18 CEST
2021
Hostname: Pi4-aarch64-Devel
Server IP Address: 192.168.0.25
Server HTTP Port
Nothing clever. Two pi's. I split up the work between the two. One is a
server and the other a player and then sync'd them. I wanted it to be
similar to the Transporter. When it's off there's 9 days of weather on
one screen and a slide show of album covers, artists and my photography
on the
Hi Howard
How did you manage to have a different image on each screen ?
Thanks
Fernando
FMatos's Profile: http://forums.slimdevices.com/member.php?userid=71884
View this thread:
paul- wrote:
> What are you trying to pair? Some devices just don't behave well.
> The scan is only for 10seconds, so sometimes you have to run scan a
> couple of times to see your device.
I'm pairing a Nuimo controller. It appears in the list when I run a
scan
35843
I was able to
rimoth wrote:
> Hi,
>
> I'm using a PI-4 & piCorePlayer 8.00
>
> I can successfully scan for devices, but the list of devices does not
> populate for pairing, See attached.
>
> Any ideas?
>
>
> 35838
What are you trying to pair? Some devices just don't behave well.
The scan is only
Hi,
I'm using a PI-4 & piCorePlayer 8.00
I can successfully scan for devices, but the list of devices does not
populate for pairing, See attached.
Any ideas?
35838
+---+
|Filename: bt-pairing.png
chrober wrote:
> Is there any way to manually revert/downgrade these changes?
I forgot I had a way to do that remotely... The change should be
reverted. You will need update the libs again.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
carsten_h wrote:
> Are these displays with resistive touchscreens? Or is a calibrations
> also necessary for capacitive touchscreens?
> I only saw calibrations for resistive touchscreens and sometimes it is
> necessary after a few years again because the resistive touchscreen
> ages.
chrober wrote:
> Is there any way to manually revert/downgrade these changes?
See post #3
*Server - LMS 8.3.0 *Pi4B 4GB/Argon one case/pCP 8.0.0 - 75K library,
playlists & LMS cache on SSD (ntfs)
*Study -* Pi4/pCP 8.0.0/Topping E30 DAC/Ruark MR1 Mk2
*Lounge* - Pi2/pCP 8.0.0 > HiFiBerry
paul- wrote:
> Yes, that update was made over the weekend. Hmm.Unfortunately I
> won't be able to check it out until this evening.
Is there any way to manually revert/downgrade these changes?
chrober's Profile:
paul- wrote:
> Its downloaded as a part of the update..its refreshed everytime the
> update starts.
Ok, thanks.
It seems, that my picoreplayer does not have the ${PCP_REPO%/} set and
then it is missing in the PCP_DL string. :(
Logitech Transporter, Touch, 3x Radio, 6x HomePod
ygi wrote:
> like a calibration process to display a cross sign in the corners and in
> the middle of the screen. Normally this will suit any LCD, no ?
Are these displays with resistive touchscreens? Or is a calibrations
also necessary for capacitive touchscreens?
I only saw calibrations for
Its downloaded as a part of the update..its refreshed everytime the
update starts.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Yes, that update was made over the weekend. Hmm.Unfortunately I
won't be able to check it out until this evening.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> That value should be set in the updater. I'll try to look at this At
> this point, it's probably much easier for you to just burn a new 8.0.0
> image.
In pcp-functions the repos are right.
Where do I find the update script?
Logitech Transporter, Touch, 3x Radio, 6x
That value should be set in the updater. I'll try to look at this At
this point, it's probably much easier for you to just burn a new 8.0.0
image.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
I suspect not. Raspberry pi only certifies a few if not only one screen
officially. Plus pCP and Jivelite aren't your run of the mill software.
There is no routine to 'calibrate' the touch screen in piCorePlayer.
Of course all of this is to the best of my knowledge which is limited.
You can
Paul Webster wrote:
> I just tried to update an old 6.1.0 on Pi1 to 7.0 but it failed.
> Should I persist or is this not possible?
>
> >
Code:
> >
> [ INFO ] You are downloading piCorePlayer7.0.0
> [ INFO ] PCP_DL=/12.x/armv6/tcz
> [ OK ] Free space: 508516k
chrober wrote:
> All the logs are empty:
> >
Code:
> > Can't load
*'/usr/local/slimserver/CPAN/arch/5.32/aarch64-linux-thread-multi/auto/Audio/Scan/Scan.so'
for module Audio::Scan:
Howard Passman wrote:
> They don't give you a lot to go on. I don't even see a brand name to go
> to for support, but that would be something to try and find. If you can
> find that you may want to post again with all the pertinent information
> i.e.:Version of piCorePlayer, Jivelite, what
Ok. Just to rule out, that it is the RPI 4B board having a bug, i
mounted the Digi Sig hat on my 3B+ nd.. Instant dropouts!
Back to the 4B headphone and after two hours of perfect playback, the
root cause likely SEEMS to stem from the hat or maybe, just maybe from
the pCP software...
I
Paul Webster wrote:
> My guess is that install LMS again will resolve it.
> However, if you can access the LMS server.log to see what it is saying
> in there when it tries to start then it might help the diagnosis.
> If it doesn't then you could try running it from SSH session and look at
> the
chrober wrote:
> I am running pCP 8.0.0 and also use its LMS.
> (the page footer of pCP web UI says "piCorePlayer | piCorePlayer v8.0.0
> | www v00017 | linux 5.10.42-pcpCore-v8 (64) | piCore v13.0 |
> Squeezelite v1.9.9-1386-pCP")
>
> Earlier today I have pushed the "Update Libs" button on
My guess is that install LMS again will resolve it.
However, if you can access the LMS server.log to see what it is saying
in there when it tries to start then it might help the diagnosis.
If it doesn't then you could try running it from SSH session and look at
the screen output
cd
I am running pCP 8.0.0 and also use its LMS.
(the page footer of pCP web UI says "piCorePlayer | piCorePlayer v8.0.0
| www v00017 | linux 5.10.42-pcpCore-v8 (64) | piCore v13.0 |
Squeezelite v1.9.9-1386-pCP")
Earlier today I have pushed the "Update Libs" button on the LMS page of
pCP's web UI.
25 matches
Mail list logo
