I have tried a few more things the last few days, unfortunately nothing
has worked. Libreelec I also installed in between to see how they solved
it, there it works. Unfortunately I could not find anything significant
in the config.txt. For now I give up and stay with version 6.1, I simply
lack
This is an old post but it might explain the problem:
The HDMI display is normally disabled when the DSI 7" display is
detected.
Source:
https://www.raspberrypi.org/forums/viewtopic.php?p=1114739#p1114739
BitStream's
As far as I can see the touchscreen is inizalized, the first lines at
bootup are also displayed on the touchscreen and then the display
changes to the TV.
Code:
tc@picore:~$ dmesg | grep "\-ts"
[ 11.203107] input: raspberrypi-ts as
When I set the framebuffers for jivelite to /dev/fb1 I have no jivelite
display on the TV or the 7" display. Only the last lines of text (NTP)
are displayed on the TV.
Okay, that should be the reason
tc@picore:~$ ls -l /dev/fb*
crw-rw1 root staff 29, 0 Jan 1 1970
Okay, I played again with the options and with
"*hdmi:CARD=vc4hdmi,DEV=0*" I also get sound over HDMI. But the picture
is only on the TV, the 7" display is dimly lit, so it is on. But nothing
is displayed there.
Code:
tc@picore:~$ squeezelite -l
Output devices:
Thanks again for your help!
The first option we already had and this does not work for me.
With the second option, the boot screen is first shown on the 7"
display, then the display switches completely to the TV and the 7"
display is blank. Audio out does not work here either.
Is there
Greg Erskine wrote:
>
> No Jivelite or 7" screen though and I don't have a amp with HDMI input
> to test.
>
Thanks for testing! I removed the 7" display and it works for me. The
picture is now completely on the TV. This is not what I wanted but
already a step further.
Without the 7"
Here exactly the same. Also a RPi 3B+ with original 7" screen (for
Jivelite) and connected directly to a Denon X4400H. Since version 3.5
the setup runs without problems.
BitStream's Profile:
paul- wrote:
> then select Analog/Save then Reselect HDMI/Save and reboot.
The lines are now entered as follows but audio out via HDMI still does
not work.
Is there anything else that needs to be considered?
Code:
#Custom Configuration Area, for config settings
bogasman wrote:
> If I change back to Analog and then go back to HDMI again, then both
> lines disappear and I have to add them back again.
I can also confirm that. However, only the active lines are deleted,
commented out lines remain. I noticed this because I tested different
options and
The TV and AVR (Denon x4400h) are turned on. But the Rasperry does not
find an HDMI output for the sound, it always finds only the headphone
output. Until version 6.1 both headphone and HDMI for sound were found.
I have added the two lines in config.txt, but they do not change
anything. In the
psketch wrote:
>
> >
Code:
> > #---Begin-Custom-(Do not alter Begin or End Tags)-
> hdmi_force_hotplug=1
> hdmi_drive=2
> #---End-Custom
> >
@psketch
It's the same for me on a b3+, HDMI is not
@psketch
It's the same for me on a b3+, HDMI is not displayed here. I've been
trying everything for two days but I only get the headphones displayed.
Code:
tc@picore:~$ aplay -l
List of PLAYBACK Hardware Devices
card 0: Headphones [bcm2835 Headphones],
hi everyone,
i have an rpi3 with picoreplayer on a Denon X4400H and want to play dsd
(dsf/dff) files via HDMI. Can anyone tell me if that's possible?
thank you in advance
BitStream's Profile:
14 matches
Mail list logo
