paul- wrote:
> You cant even click in the area that there is text shown. Appears to be
> a longstanding issue in firefox.at least google returns hits back to
> 2014. Everything talks about hiding the default element and make my
> own...perhaps down the road.
Same problem with Cliqz on
Update to RC1 from 9 on Pi3 went smoothly, will continue testing with
LMS 8.0.0
*Server*rpi3 pCP5.0.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton
680MkII / Grado F-1+ >
mherger wrote:
> > Hmmm... Hotfix applied, pCP updated to 5.0.0, just to be sure have
> > closed down pCP and rebooted by reapplying power supply (off/.../on),
> > LMS not autostarting even though pCP is set to auto start it, tried
> to
> > start LMS from LMS page... error message "[ INFO ] Star
Hmmm... Hotfix applied, pCP updated to 5.0.0, just to be sure have
closed down pCP and rebooted by reapplying power supply (off/.../on),
LMS not autostarting even though pCP is set to auto start it, tried to
start LMS from LMS page... error message "[ INFO ] Starting LMS...
[ INFO ] The following
DavidBulluss wrote:
> I did the 4.1.1 hotfix a couple of weeks ago... is that the one you
> mean?
Ha ha, found that there is another one. All good now! :)
Cheers, David
*Server*rpi3 pCP4.1.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose A
Paul Webster wrote:
> Did you apply the hotfix first?
I did the 4.1.1 hotfix a couple of weeks ago... is that the one you
mean?
*Server*rpi3 pCP4.1.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS custom cinema sub
Not sure if I have jumped the gun, but I attempted to update from pCP
4.1.1 to pCP 5.0.0 using the UPDATE pCP button but it halts at an error
"Reached initial in error." :(
Cheers, David
*Server*rpi3 pCP4.1.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acou
paul- wrote:
> You are the first brave sole to admit pressing the Hotfix button.For
> others reading, that might not be wise right now..it will be
> required before upgrading to 5.0.0, but right now 5.0.0 is not released,
> so there is no need to do it.
Hmmm... I did it late last week f
Greg Erskine wrote:
> Thanks David,
>
> On my PC using Edge, it goes from screen 1 to screen 3, just like you
> want. :D
>
> I will keep and eye out.
>
> I wonder if it is the partial "Setup Network Disk Mount" attempt?
>
> regards
> Greg
I was wondering that... red box around the password?
Greg Erskine wrote:
> Hi David,
>
> I don't follow what you are saying.
>
> Do you have "debug" mode on in error? Do you see orange [ DEBUG ]
> messages everywhere?
>
> What browser are you using?
>
> You probably need to post a screen shot.
>
> regards
> Greg
No debug on. Browser is Googl
paul- wrote:
> Anyone else have something that needs addressed. Otherwise we'll flip
> this to a release.
Very minor, but it has been annoying me: when I restart LMS using
RESTART on the LMS page of pCP the page always scrolls down so that the
INFO at top of page is not visible. There may be a
paul- wrote:
> Your pi will have a MAC address for the ethernet port, and one for your
> wifi. Use with diagnostics on the pCP web pages to get the mac
> addresses.
Paul, used the MAC address under diagnostics/Raspberry Pi and it is now
working correctly. Thanks!
Cheers, David
*Server*r
paul- wrote:
> Your pi will have a MAC address for the ethernet port, and one for your
> wifi. Use with diagnostics on the pCP web pages to get the mac
> addresses. You will not be able to use the same address for both
> connections.
> What brand/model is your router?
The router is a NetCom
paul- wrote:
> David,
>
> If you would just setup your router to always pass the same address
> based on MAC address, your problems would be 100% solved. DHCP is way
> more reliable, and if something ever changes in your setup..change
> your router, and reboot your devices, and they all ge
paul- wrote:
> David,
>
> If you would just setup your router to always pass the same address
> based on MAC address, your problems would be 100% solved. DHCP is way
> more reliable, and if something ever changes in your setup..change
> your router, and reboot your devices, and they all ge
Just a few things noticed in change from 3.5.0 to 4.0.0:
- newconfig.cfg does not seem to be required. I used it when installing
a fresh image of pCP 4.0.0 but after the install it had retained the
name of newconfig.cfg and the settings had not been used
- after an insitu upgrade 3.5.0 to 4.0.0 I
Hi, is there a quick rundown available of changes/fixes in b6?
Cheers, David
*Server*rpi3 pCP4.0.0 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton
680MkII / Grado F-1+ > NA
I updated my pi3 pCP v3.5.0 to v4.0.0 a couple of days ago and have been
having problems since then. Unable to find the pi3 on the network,
didn't show up in DHCP list of router. Eventually cleaned the SD card
and started again with a downloaded image of 4.0.0. New install, then
new install of LM
Greg Erskine wrote:
>
> So, can you show a screen shot of your Static IP page.
>
Hi Greg, I am continually being assigned 192.168.1.10 upon reboot, every
time! Have tried setting static IP to various numbers in the range that
are unused. My usual address has been 192.168.1.20 and have been u
DavidBulluss wrote:
> Hi Paul, thanks for that. When I had bluetooth switched on it was paired
> with a Bose mini-link speaker, and connected to it. Because Squeezelite
> wouldn't start I switched bluetooth off, but Sqlite will still not
> start. Needless to say, cold restart
paul- wrote:
> David,
>
> When using Bluetooth, it is completely normal for squeezelite not to
> run. The speaker has to be paired and connected for squeezelite to run
> properly. The speaker connect daemon that runs will automatically
> restart squeezelite once a speaker connects.
>
> Not
My rPi3 is running pCP 3.5.0 and LMS n7.9.2, connected by LAN to my
computer for GUI and to server hard drive by USB. I have DCHP turned off
and a fixed IP address for the rPi. Have had no network issues until
today when I attempted to start Squeezelite and use bluetooth connection
to a bluetooth
paul- wrote:
> Run diagnostics from the main page. Look at the last dialog box.
> Contents of www/cgi-bin.
>
> Is there any file called insitu_update_stage2.With any extension?
> If there is, if you can ssh in and remove them.
>
> Only the stage2 files, do not delete stage1
Thanks, wor
paul- wrote:
> Just read the dialog boxes that pop up when you click the update pCP
> button.
Every thing in step 1 is ok (Internet accessible, Sourceforge
accessible, currently running cPC 3.22) Step 2 (downloading update, step
2a removing update script, step 2b downloading update script) then
paul- wrote:
> likely a DNS problem. What does the internet and sourceforge status
> checks show?
Is that something I run external of pCP? If it is in pCP it is quite
well hidden, am running on beta :-)
David
*Server* pi3 pCP LMS
*Media* ReadyNAS DuoV2
*Lounge/dining areas* SBT > Denon AVR
Hi, just can not get pCP update to take me from 3.22 to 3.5, continually
getting error "Error downloading the Update script" at step 2,
downloading files. Using a Raspberry Pi3. I must be missing something!
Cheers, David
*Server* pi3 pCP LMS
*Media* ReadyNAS DuoV2
*Lounge/dining areas* SBT > D
Greg Erskine wrote:
> There are some Sourceforge issues.
>
> http://forums.slimdevices.com/showthread.php?107352-Announce-piCorePlayer-3-20&p=906987&viewfull=1#post906987
Thanks, relieved it is not at my end!
Cheers, David
*Server* pi3 pCP LMS
*Media* ReadyNAS DuoV2
*Lounge/dining areas* SB
Update pCP - Update piCorePlayer without removing the SD card: when I
try this I get an error message that the update script is corrupted. Has
been like this for a few days. I am not really expecting to find a newer
version to update to but I have been having time clock issues for a few
days so wa
28 matches
Mail list logo
