latest version 1.17a from
https://sites.google.com/site/picoreplayer/home/download.
Any help would be greatly appreciated. Thanks! Hammer.
Hammer's Profile: http://forums.slimdevices.com/member.php?userid=623
Hi, I am trying to do the samething using a wandboard. squeezelite
plays fine and I can control it with say ipeng, but I can't get flirc to
work. Any ideas? Thank you.
Hammer's Profile: http://forums.slimdevices.com/memb
Hi, can someone tell me exactly the command I need to perform the
update? Also, is there a way to install flirc support?
Thanks!
Hammer's Profile: http://forums.slimdevices.com/member.php?userid=62334
View this thread: ht
JackOfAll wrote:
> ssh into the WB
>
> >
Code:
> >
> sudo rm -rf /home/jivelite/.jivelite
> sudo csos-cleanInstall -y evtest Flirc SDL jivelite\*
> sudo flirc_util loadconfig /etc/flirc/jivelite_ralphy_debounce_map.fcfg
> sudo reboot
>
--
JackOfAll wrote:
> Hammer, where in the world are you? UK or Europe, by chance? I'm happy
> to send you a "known to be working with Wandboard Flirc dongle" and you
> send me yours.
Wow! That's very kind of you...I'm in the U.S. Given I've tried two
dong
Hammer wrote:
> Just posted the issue on the flirc forum...will let the group know how
> it was resolved. Thanks. Hammer
Hi, not much luck on the flirc forum...basically, given the result os
lsusb and flirc setup, I'm told the flirc device is working properly.
Anything els
Pascal Hibon wrote:
> third time's the charm
>
> V
> V
> V
Just posted the issue on the flirc forum...will let the group know how
it was resolved. Thanks. Hammer
Hammer's Profile: http
eed to make to activate Jivelite? As I mentioned, I am
running F19 R7 and have installed the flirc software. I don't have LMS
Server running on the Wandboard. But in Squeezelite, I have the address
of my LMS Server set. iPeng control works fine...
Has anyone else experienced this problem?
Hammer wrote:
> Good point - I just ordered another one. Will update when I get it.
> Thanks again!
Hi, I received the new flirc today and it still does not work. I
updated the firmware to 2.6 and relearned the keys...
Any
Pascal Hibon wrote:
> Did you get in contact with Flirc support?
> Wonder what they have to say about this issue.
I didn't...given it works on a Mac or Windows PC, I figure I would have
a hard time convincing them of my problem. So I just ordered a new one
on Amazon. Gets here tomorrow, so I w
Pascal Hibon wrote:
> Sure, but it doesn't work on your WB. The keyboard test would confirm
> that the WB and the software is working as it should.
> The dongle itself is recognized... but doesn't work.
Good point - I just ordered another one. Will update when I get it.
Thanks again!
-
Pascal Hibon wrote:
> Just to confirm things: can you plug a USB keyboard into the WB and try
> the key combinations?
> I guess you should now head over to the Flirc site and contact support.
Thanks. But the dongle does work - I did the Word test and it generates
the right key strokes...
---
27;s why I need a hub) and plugged the flirc dongle directly
into the wandboard, but still no luck with the remote...
I appreciate your help. Anything else I can try?
Thanks, hammer
Hammer's Profile: http://forums.slim
So, it looks like I did program the keys, but pressing the keys on the
remote still has no effect.
Any thoughts?
Thanks again!
Hammer
Hammer's Profile: http://forums.slimdevices.com/member.php?userid=62334
View
Pascal Hibon wrote:
> Strange...
> Can you ssh into the WB? That way you could see if the WB recognizes the
> Flirc dongle when you plug it in.
Do you mean login using Putty? I can do that. How do I tell if the
flirc is recognized?
Pascal Hibon wrote:
> Found this on the forum:
>
> Go RIGHT, RETURN
> Back LEFT, ESC, BACKSPACE
> Scroll up UP
> Scroll down DOWN
> Home h, HOME
> Up i
> Down k
> Left j
> Right l
> Play x, p
> Play (hold) P
> Play next W
> Pause c space
> Add a, (Keypad +)
> Add (hold) A
> Rew z, <
> Rew (hold)
Hi, I know I have asked before so apologies for repeating...but I am
still not having any luck getting the flirc dongle to work on my
wandboard quad. I have programmed the jive lite keys and as someone
suggested, tested the programming in Word and when I press the remote,
the keys show up in the
slackhead wrote:
> If you have programmed the keys correctly then it should just work with
> out any other steps - no updates (or reboot even) required. If the
> FLIRC program was showing the correct keys on the display when the
> remote buttons were pushed it will be setup fine.
>
> I presume
slackhead wrote:
> You need to use the FLIRC configuration program which allows you to
> setup pretty much any remote control unit and assign buttons to give out
> any particular key stroke. The CSOS website has a list of the keys used
> by jivelite, about half way down this
> page:-http://www.c
SBT and it will always reboot fine. Given both are Linux
based, when is that? Just curious. Thanks, hammer
Hammer's Profile: http://forums.slimdevices.com/member.php?userid=62334
View this thread: http://forums.
Pascal Hibon wrote:
> With the FLIRC dongle you probably could map different keys for play,
> forward, back etc so that they don't interfere with the SBT.
> Otherwise there are the smartphone (Apple and Android) applications that
> let you do just that. On Apple there are iPeng and SqueezePad. On
; too. Some JVC remotes (I believe a DVD remote) should work too.
Thank you. Is there a way to use a different remote? In addition to
the wandboard, I also use a SBT and would like to control each
independently. Hammer.
---
Hi, I am running R7 on a wandboard quad and would like to use a remote
to control squeezelite with simple commands such as play, pause, next,
prev, and stop. I don't have a display attached. Is this possible?
Thank you! H
JackOfAll wrote:
> He'll be wanting to put sudo in front of that cmd if executing as the
> fedora user.
>
> >
Code:
> >
> sudo alsactl store 3
>
----
> >
>
> EDIT: Hammer, after running "alsamixer
always be at 100 do I don't need to log on to the wandboard
each time I reboot or lose power? Thank you! Hammer
Hammer's Profile: http://forums.slimdevices.com/member.php?userid=62334
View this th
Jackofall, would you mind sending me a link when you have a minute?
Thanks, Hammer
Hammer's Profile: http://forums.slimdevices.com/member.php?userid=62334
View this thread: http://forums.slimdevices.com/showthread.
day, the service goes inactive. I leave the Auralic
in standby mode when I am not using it.
Any thoughts? And any update on F20 for the WBQ?
Thanks for the all great work!
Hammer
Hammer's Profile:
JackOfAll wrote:
> Right, but you said you have programmed the flirc using Ralphy's config,
> which is specifically for a squeezebox remote. The fcfg file contains a
> mapping between the code generated by your IR remote when you press a
> specific key and the keypress you want to appear from the
JackOfAll wrote:
> Which remote are you using? You realise the config you have loaded is
> specific to a squeezebox remote?
Oh, I thought the configuration file has to do with key layout. I
loaded the flirc software on a pc and had it "learn" the media keys from
an old remote I had. Does it no
Hi, with all this great info on using flirc, I decided to get one to see
if I can use a remote for very simple commands without having to hook
the wandboard to a screen.
But...that doesn't seem to work. Should it? I mainly use ipeng for
control, but it will be useful to have a regular remote fo
Hi and thank you all for the great work on this project. Is the F20
image for the WB Quad available? If so, can I get a PM link to that?
Thank you, Hammer.
Hammer's Profile: http://forums.slimdevices.com/membe
ng screen)
> Favorites = Favorites
> Search = Current Track Info
> Browse = Music Library
> Now Playing = Now Playing
> Size = Stop
> Brightness = Playlists
Hi, are there instructions anywhere on how to install this (and perhaps
other needed software) so I can
Update...I stopped the server component and it now works!!
Thanks again.
Hammer's Profile: http://forums.slimdevices.com/member.php?userid=62334
View this thread: http://forums.slimdevices.com/showthread.php?t=99395
_
progress. Thanks very much for
your help.
Hammer
Hammer's Profile: http://forums.slimdevices.com/member.php?userid=62334
View this thread: http://forums.slimdevices.com/showthread.php?t=
DEV=0, but none of them work. Any thoughts? Both DACs use the
xmos chip, I believe.
Thanks very much for you help.
Hammer
Hammer's Profile: http://forums.slimdevices.com/member.php?userid=62334
View this th
35 matches
Mail list logo