Jursi wrote:
> Thank you for your answer! I think I will order that one.
>
> Are you saying that aux input is not working in the USB dac?
> _I_really_need_aux_input_ because I'm using PC speakers in the kitchen
> where I am placing the screen.
>
> I have ordered this USB Dac for another room
Jursi wrote:
> Hello,
>
> Do any of you know any cheap chinese touch screen (3.5 inch) that should
> work with picoreplayer and raspberry pi 3? Or are everyone using
> waveshare screens?
>
>
> Thank you in advance!
I am using this one
9,83 17%OFF | for Raspberry Pi 3 Model B 3.5 Inches
I just tried to configure my oled to get it to work. Unfortunately I do
not understand the installation hints
- Copy the lmsmonitor and startDisp.sh files to the
/etc/sysconfig/tcedir/ directory. -> I cannot find
any file called lmsmonitor, only lmsmonitor.c nor a file
Hi there
While I built two raspy-based picoreplayers I wanted to start them with
a dedicated radio station after hard power off. I tried the built in
function and followed the instructions / preconditions. All the
preconditions are fulfilled but I cannot see any of the favorites in the
piPlayer wrote:
> If another audio card is activated, the config.txt file is changed
> automatically. The built-in audio card must be disabled "dtparam = audio
> = off" and the audio card overlay must be added to the custom section in
> config.txt. In your case, it should look like this:
>
>
Ok, my display is working flowlessly now. Great.
The drawback: The hifiberry DAC does not work any more.
It is again reproducable. Starting from a new image following the
instructions I can get the display to work and the RPi analog output is
working at that time.
Changing the Settings and
Greg Erskine wrote:
> How did you create jivelite.sh?
>
> If you created it on a Windows PC, try $ dos2unix jivelite.sh
Great. Thanks. Sometimes the easiest solution is the solution.
Everything is running as it is supposed to be!
Greg Erskine wrote:
> ./jivelite.sh to run a script in the current directory. :)
Nope. I am still using the original setup and image 5.00 or 4.1.
drwxrwxr-x4 tc staff 1024 Jun 24 14:25 ./
drwxr-xr-x3 root root 1024 Nov 28 2018 ../
-rwxrwxrwx1 tc
piPlayer wrote:
> That's good.
> What happens if you start your jivelite.sh script manually (sudo
> /mnt/mmcblk02p2/tce/jivelite.sh)?
> If Jivelite does not start then, I think it's a mistake in the startup
> script.
I tried it but I recognize a very strange behavior because the system
does
JustRay wrote:
> Jivelite is executable and the autostart is enabled but it does not
> work. I do not have any idea since I repeated it several times with
> entire new setups.
I now tried to install the 4.1 - with exactly the same issue. It seems
to be a 100% reproducable error.
An
Hi there
I just made a new setup based on (picoreplayer 5.0 and) the advices
http://www.pughx2.com/picore3.html
and post #157.
Unfortunately jivelite does not start. And I am only able seeing the
screen if I am plugging the raspi to hdmi but not on the 3.5 TFT. The
player itself is working
Greg Erskine wrote:
> hi JustRay,
>
> Any chance you can do a $ps to see if there are multiple jivelite
> processes running?
>
> If so, did you try my version of jivelite.sh in post #153?
>
> regards
> Greg
pstree says
root@piCorePlayer:/home/tc# pstree
12 matches
Mail list logo
