Oops, I used the wrong file to put here.
Code:
PARAMS1="pin=18,func=2,pin2=13,func2=4"
This is the line I tried mainly.
S3cret's Profile:
Hi Greg,
thanks for your explanation.
As far as I know, the only real difference between the Zero and other
PI's with audio out is the missing high/low pass filters and the audio
jack. So my approach was to use the standard Analog.conf and modify it
to use the pwm-2chan overlay:
Code:
Ok, for testing I now switched to PCP 3.5. I did some tests with
Raspbian and audio immediately worked after adding the line in
config.txt. So it is definitely the software.
I tried creating a new card definition but even though I set the correct
rights my new file disappears at every reboot.
This was easier than thought, thanks.
So remaining is only the problem with no sound at all. I will attach my
speaker directly to the GPIO later today to make sure that it is not my
circuit that is fault.
However, is there something in PCP that needs to be changed additionally
to the one line
Hi, i am using PCP 4 Beta 7 and I used this 'tutorial'
(http://shallowsky.com/blog/hardware/pi-zero-audio.html) to build a
small circuit to power an active speaker of mine.
Only problem: I do not hear a thing. In the squeezelite settings I set
analog audio as output, I edited the
