Try using:
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -c aes128-cbc
192.168.xx.x -l root
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
Fabius wrote:
> Its on a separate USB stick. So iam fine without backing up.
>
Should always have a backup.
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this
Fabius wrote:
>
>
>
so it seems i have to make a fresh install. is it possible to save the
> lms config with the presets an music database and import them after a
> fres install?
>
> Thanks
Is your CACHE on the Micro SD with pCP? (If its on a separate drive,
pointed to on the pCP LMS tab,
Didnt realize that, thanks.
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread: http://forums.slimdevices.com/showthread.php?t=114828
First time trying the pCp CLI
https://docs.picoreplayer.org/information/pcp_cli/
and with LMS, getting a bad address error:
tc@picoreplayerpb:~$ pcp mode
wget: bad address ':9000'
tc@picoreplayerpb:~$
Tony
SBTouch SBRadio
paul- wrote:
> There is no way to "update" between 32 and 64 bit.
Thought so. 32 bit running great. I suspect that I may find some
advantage to rescanning LMS in 64 bit, otherwise I cant think of
any other advantages for me as I only use pCP for LMS.
Is there an other advantage to 64 Bit on
Insitu_update From 7.01 to 8.0 went well.
Been doing the Insitu_update since 6.0
Im on a RP3B. Did the Insitu_update do a 32 bit install? And if so,
is the only way to get to a 64bit with a full install?
Thanks for the great work.
Tony
SBTouch SBRadio
Greg Erskine wrote:
> I *think* this may be an issue that your router is not up before LMS
> tries to start.
>
> LMS needs to set the time using ntpd. This has been discussed a few
> times before.
>
>
Greg Erskine wrote:
> I don't think its normal.
>
> What's different with your setup?
System is a Pi4, Ethernet, WiFi disabled, attached HD with the FLAC
files, powered by the Pi.
Tony
SBTouch SBRadio
Tony T's
I have a very minor issue that may have started with 7.0, but may also
be a pi4 issue.
If I have a power failure, when power is restored pCp does not start up.
I need to manually reboot the pi4 (by unplugging / replugging the
power) to get pCp to start again.
Anyone else have this occur?
Tony
Been on 7.0 for about a month and there is a real increase in response
on my pi4
Thanks!
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
Which Windows rsync are you using?
The link provided in https://rsync.samba.org/download.html ,
https://www.itefix.net/cwrsync
Has a bare bones rsync implementation that may (or may not) be free
Tony
SBTouch SBRadio
rgro wrote:
> Hey Tony T...
>
> It worked fine on Windows. I also have one last question about rsync.
> Does the basic sync/backup function continue to work after the 30 day
> free trial period or do you have to pay to keep it functioning???
I use the open source (free rs
Use rsync to backup your SSD to your WD. No need to format the WD as
Ext4
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
Minor point, may not be 7.0 related. dosfsck returns error downloading
dosfstool.tcz
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
paul- wrote:
> The RPi wifi driver and firmware changed quite a bit recently, as well
> as the RPi devices enforce country code setting for channel usage.
New Pi4 rpi-eeprom released this week. (LATEST: Thu 03 Sep 2020 12:11:43
PM UTC (1599135103))
Tony
SBTouch SBRadio
mr-b wrote:
> Great - that was it! (The 'file' cmd doesn't seem to be present on PCP
> ('find' couldn't find it), but dos2unix was and it did the job - no more
> errors!) Tx!
> Sorry to interrupt the thread with such Shell Scripting 101 stuff.
Another way to see the line endings is with cat
Good catch.
(I made the mistake of just opening it in my Smultron text editor and
forgot I had it set to convert to UTF-8 on open).
Tony
SBTouch SBRadio
Tony T's Profile:
Script looks ok, not sure why "/mnt/mmcblk0p2/tce/mydata.tgz" is being
truncated to "ata.tgz" (: No such file or directoryata.tgz)
Weird.
All I can think of is to try setting the permissions again with chmod
744 backup.sh
Tony
SBTouch SBRadio
Attach the script as a file.
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread: http://forums.slimdevices.com/showthread.php?t=112456
mr-b wrote:
> Tx but still problems if I add or replace the first line with #!/bin/sh
>
>
> tc@PCP-XLR-LMS:/mnt/mmcblk0p2/tce/backup$ ./backup.sh
> -sh: ./backup.sh: not found
Try putting the command on one line in the script (without the \ line
breaks. Might be a misplaced white space
Michael,
I understand not to backup the plugins and let the plugin manager handle
it, so the wiki should be edited to not include them in the Backup
wiki.
see: http://wiki.slimdevices.com/index.php/Backup
Tony
SBTouch SBRadio
mherger wrote:
> > Album cover lookup (4245 of 4245) Complete 00:20:51
> > Artist picture lookup (2343 of 2343) Complete 01:02:36
>
> The Music & Artist Information plugin can search for missing and artist
>
> artwork. Depending on your configuration this takes more or less long.
>
Initially my post had a typo, I do a complete scan on 10,000 tracks on a
pi4 in 4 minutes, so unless you have 150,000 files (possible), it
shouldnt take over an hour on a pi4
I have my files on an attached USB drive, and I created a directory for
the files (/mnt/MUSIC/FLAC) and a dir for my
mr-b wrote:
> The issue is that my rescans take a couple of hours, which is a pain for
> a transient situation.
>
> But in general I think that the ability to back up (and restore) PCP (&
> LMS) at an app-level (vs dumping the sd-card image) e.g. the LMS library
> scan/artwork dbs, prefs,
paul- wrote:
> Interesting. I would have thought xargs could deal with that. I never
> create filenames like that, so I never see those errors. Thx for
> tracking that down, will change how I do that.
print0 fixes the single quote error, but then grep passes one long
filename to xargs -0
paul- wrote:
> This is how they are set. Where $I is the mount point of any mounted
> drive.
>
> >
Code:
> >
> find $I -type d | grep -v "lost+found" | xargs -r chmod 755
>
> >
>
Running that command I get an "xargs: unmatched single
paul- wrote:
> This is how they are set. Where $I is the mount point of any mounted
> drive.
>
> >
Code:
> >
> find $I -type d | grep -v "lost+found" | xargs -r chmod 755
> find $I -type d | grep -v "lost+found" | xargs -r chown tc.staff
> find $I -not -type
paul- wrote:
> How are you copying data to the drive. One process can fix the
> permissions, and another can break it.
The files are already on an external flash drive, correct permissions,
but changes
Initially they were copied over with rsync -a --no-owner --no-group
--no-perms
paul- wrote:
> The more likely answer is that however you are writing the data to the
> drive, the permissions are getting modified by the remote computer. Or
> it is not a unix native file system.
Linux ext4. After I correct directories to 755, if I re-run LMS->Set
Write Permissions,
Again, after an install, of LMS, selecting LMS->Set Write Permissions
misses a Folder. Different Folder than last. 664 is set on the Folder,
not 755.
Tony
SBTouch SBRadio
Tony T's Profile:
Just checked dmesg, no low voltage warnings/error. Flakey power
supply, I guess. New one arriving tomorrow :)
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this
paul- wrote:
> Unlikely the script. I just ran it on a pi3B, to grab 7.9.3.What is
> happening when it crashes is just a compression algorithm building the
> packageit is a multi-core compression, so it will load up the CPU
> for a short period of time. Likely a memory problem, since
paul- wrote:
> Something is causing your ssh session to crash. Can you reconnect to
> the device, or do you have to reboot it. What is your ssh client
> program?
I can reconnect. Ive sshd with a Mac Terminal and with iOS with the
Prompt App. Same result.
Tony
SBTouch SBRadio
paul- wrote:
> Plenty of ram, And what happened when you ran the script after a fresh
> reboot.
Same. Sometimes is doesnt even get to 33%
...and remember that Im ok as I just uninstalled LMS through pCP and
re-installed and got 7.9.3. Just wanted to pass along this.
Tony
SBTouch
Just running pCp (also tried with LMS shut down). On a Pi 3B.
Code:
tc@piCorePlayerPB:~$ free totalusedfree
shared buff/cache available
Mem: 999040 176784 646076 11428 176180
810520
Swap:
I followed the instructions on:
https://www.picoreplayer.org/how_to_upgrade_lms.shtml
Here's what happens:
Code:
tc@piCorePlayerPB:~$ cd /tmp
tc@piCorePlayerPB:/tmp$ wget
https://raw.githubusercontent.com/piCorePlayer/lms-
update-script/Master/lms-update.sh
On a 2nd pi I attempted a downgrade to 7.9.3 with the lms-update.sh
script and it fails.
7.9.3 is downloaded and then lms-update.sh successfully unpacks it, but
the installation fails (always with a broken pipe)
I just removed LMS and reinstalled within pCP, but I thought Id just
let you
Greg Erskine wrote:
> hi mr-b,
>
> We are just going around in circles with this.
>
> We were only recently persuaded to move to LMS 8.
>
> So we are the devil if we do, devil if we don't. :D
>
> regards
> Greg
Anddd
back to 7.9.x (7.9.3 as of today)
(Saw a mention on the 6.1.0 Issues
Paul Webster wrote:
> In the last day or so Paul- said that he would change (this weekend) new
> installs of pCP to default to 7.9.x rather than 8.0
Removed and re-installed LMS and 7.9.3 is the default now.
Tony
SBTouch SBRadio
Tony T wrote:
> Odd issue. I had just one Directory in my MUSIC folder that had
> incorrect permissions, but set write permissions in the pCp LMS Tab
> did not correct it (I corrected myself with chmod 755)
Decided to start over by deleting the Music Files and re-copying and
a
Odd issue. I had just one Directory in my MUSIC folder that had
incorrect permissions, but set write permissions in the
pCp LMS Tab did not correct it (I corrected myself with chmod 755]
Tony
SBTouch SBRadio
Tony
Found it! Thanks.
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread: http://forums.slimdevices.com/showthread.php?t=111787
Is it possible to start LMS from the command line? (after ssh into
piCorePlayer)
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
Extras->LMS CLI->Select LMS doesnt list my LMS and lists an unknown
name [Pine]
Any idea where its getting Pine from?
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
I set up a custom cron in: Tweeks->Schedule CRON jobs
I'm attempting to rsync some files to another pi on my network
passless ssh set up, and the script runs when I'm logged in as tc,
however the rsync fails in the cron job.
Now, I realize that the problem is that the cron is done as root and the
Viragored wrote:
> Someone with my skill level (pretty much just a consumer as far as Linux
> products are concerned) finds it easier to take the SD card to the PC,
> back it up, then return it to the Pi than start on the path to discover
> what "rsync" and "cron" mean. I tried using Filezilla
garym wrote:
> what about the prefs and plugins subdirectories?
>From the Cache, the prefs are the files I copy over (server.prefs) and
also my favorites (favorites.opml)
And yes, youre correct, the plugins directories need to be copied over
(knew that, but forgot about it in my post)
Tony
I also back up the CACHE directory, but on a re-install I find that the
only files I need to copy over are favorites.opml and server.prefs and
the pCP settings (/mnt/mmcblk0p2/tce/mydata.tgz)
Am I correct with this, or are there other files needed on a re-install
to recover settings?
Tony
Viragored wrote:
> I have put my LMS cache on the SD card so that I can back up the whole
> card on my PC. I'm a bit of an enthusiast for backup copies of valuable
> stuff. And recently I was pleased to be able to restore from PC to SD
> card with a fully working and only slightly out of date
Is it preferable to place the CACHE on the SD Card or the drive with the
Music files?
I always think it better on the drive as there would be no writes to the
SD Card.
Tony
SBTouch SBRadio
Tony T's Profile:
Update: Tried a cable from another drive (should have thought of this
first), and the drive connects to the USB 3.0 port.
Makes sense that the cable on this cheap drive would be a cheap cable
;)
Now to see if it stays connected.
Tony
SBTouch SBRadio
Man in a van wrote:
> does it disconnect when you hot plug the drive ? (I have had this happen
> once or twice)
>
> If so, is it recognised if you power on the pi with the drive already
> attatched ?
>
> ronnie
Both. Sometimes its recognized, sometimes not, but always disconnects
after
Thanks for your help with this, Ill investigate further, but for now,
Ill just connect the drive to the Pi USB 2.O Port
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
Man in a van wrote:
> It should not make a difference
>
> https://www.raspberrypi.org/documentation/hardware/raspberrypi/usb/README.md
>
> What powere supply do you use for the pi and what usb drive ?
>
> There are reports of USB3 and using wireless on the pi causing
> difficulty for some
garym wrote:
> can't find the thread now, but another user had the exact same issue. I
> did not see this issue (can use the USB 3.0 slot), but one difference is
> that my rPi4B happens to be a ver 1.2 and his was not. You can see the
> version of the rPi somewhere in the picoreplayer webGUI
Ok, probably not the right place to this, but
I have a Pi4, and have attached a USB 3.0 hard drive that is powered by
the Pi
Now, all is working fine with 2.0 port, but if I plug the drive into the
3.0 port it will disconnect (or not mount at all)
Im fine with using the 2.0 port, but what
FWIW, I'm fine with 8.0.
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread: http://forums.slimdevices.com/showthread.php?t=111787
paul- wrote:
> I dont disagree Michael, a few posts back, I recommended against
> installing nightlies as soon as they are posted. But if you watch
> https://github.com/Logitech/slimserver-vendor/tree/public/8.0. And read
> posts on the form before updating.
Still, I think it might be
I dont see how it would lead to more questions as you have pretty
good explanations
with more
Anyway, I dont need it now, but if I have any problems with the
LMS 8.0 beta, Ill be back with a question of how to d/l 7.9.2 ;)
Tony
SBTouch SBRadio
Suggestions: How about a LMS button to give a choice of downloading
either the last stable release of LMS [7.9.2) or the beta 8.0
Tony
SBTouch SBRadio
Tony T's Profile:
Greg Erskine wrote:
> hi Tony T,
>
> The time not getting set is usually an indication of a slow network or
> slow DCHP server. pCP sets the time from a NTP server on the Internet.
>
> regards
> Greg
Thanks,
I was thinking that may be the case.
How often does pCP set
Just installed 6.0.1 and a few times the time/date is not being set
(showing DEC 31 1969
Tweeks->Timezone has the correct info, and if I "Save" and re-boot, the
time is set correctly.
Happened a few time, maybe while I've been shutting down and powering on
while I've been playing with my setup.
garym wrote:
> on pCP main page, click DIAGNOSTICS, then on that page, click the tab
> for "Rasberry Pi" (or some similar name, not where I can see my own page
> right now)
Ah! Thanks. Forgot to look at the Tabs when I went to the Diagnostic
Page
54°C, at idle.
Tony
SBTouch SBRadio
Just set up pCp on a pi4 (have another one on a pi3)
Is there a way to check the temp of the pi4 in pCp?
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
chill wrote:
> I think I found the link you're referring to - is it 'this one'
> (https://howchoo.com/g/zmvjzwmzmjm/add-raspberry-pi-4-cooling-fan)?
>
> I think their wording ('GPIO pin 4 (5V)') is misleading - I think
> they're connecting to physical pin 4, which is a 5V supply pin, rather
>
chill wrote:
> Pure coincidence - I didn't know that! Do you have a link for that? My
> fan is switched by a transistor in the GND wire ('earlier post'
> (https://forums.slimdevices.com/showthread.php?110690-Pitastic=948714=1#post948714)).
I did't think you used a transistor, so I was
Thanks. I forgot about the pCP 'Tweaks' section.
Also, thanks for the code. Like that you're using gpio4 for a switch
(No need for a transistor to switch in the write-up I found).
Tony
SBTouch SBRadio
Tony T's
I finally got my Pi4 and using it for a PLEX server.
I'm running pCP on a Pi3, and may move it to another Pi4 next.
I know that the 4 runs hot, and expect that a fan will be needed with
pCP/Pi4 (please correct me if I'm wrong), but I would like to use a fan
control that will turn on the fan only
Thanks for the Pi4 reports
Looks like I'll be staying with my Pi3 for my piCorePlayer/LMS (which is
working great)
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View
Thanks, just read them.
I use pCp to run LMS, so I'll get the 4.
A new case will be needed, so I'll wait until the 4 is in stock and
cases are available.
Tony
SBTouch SBRadio
Tony T's Profile:
Will there be any noticable difference in PiCorePlayer going from a Pi3
to a 4?
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
mherger wrote:
> > I have PCP on a Pi 3B+, all music is on a NAS (samba) and I'd like
> the
> > LMS cache/prefs to sit on the NAS too.
>
> I wouldn't do this. I've been running LMS on a Pi for 18+ months now,
> and haven't had the slightest problem with cache/prefs on the SD card.
> Putting
Tony T wrote:
> I'll be updating from 3.5 soon.
> Any reason/advantage to a clean install instead of the insitu
> installation?
>
>
.and a Big Thank You to the pCP Team!
Did the insitu from 3.5 to 4.0
Got an error about boot.tar or something like that not available, but
then i
I'll be updating from 3.5 soon.
Any reason/advantage to a clean install instead of the insitu
installation?
.and a Big Thank You to the pCP Team!
Tony
SBTouch SBRadio
Tony T's Profile:
Another (old) perl command line email client:
http://caspian.dotconf.net/menu/Software/SendEmail/
(I use this, but didn't try it in pCP)
Tony
SBTouch SBRadio
Tony T's Profile:
I have my cache on an ext3 partition.
Is there any advantage to ext4 (for a LMS cache only partition)?
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
OK, I'll turn on logging.
It's very strange that rebooting (pi as well as router) does not fix the
problem, only uninstalling and reinstalling the Slacker and Pandora
plugins.
Tony
SBTouch SBRadio
Tony T's Profile:
Slacker gets stuck in a loop and Pandora skips mid song (I mentioned
this a week or so ago). Only fix is to uninstall and reinstall the
plugins in LMS Settimgs. Very strange. Only happens with my pCP LMS
not on the LMS I run on a Mac mini (7.9.0 on the mini)
Any idea what's causing this?
Paul, I'm having trouble since installing LMS 7.9.1. I would like to
rule out 7.9.0->7.9.1
You had a way in 3.21 to d/l LMS 7.9.1, could you please add a way to go
from 7.9.1->7.9
Tony
SBTouch SBRadio
Tony T's
I did a full install when I went from 3.21->3.22
Working fine.
For future knowledge, how is an Insitu update done?
On the Main Page in Normal mode I see:
[Update pCP] Update piCorePlayer without removing the SD card
In Beta Mode at the bottom of the Main Page I see:
[Hotfix] Run Hotfix Update and
pCP 3.22 running well.
Did a clean install last night.
One minor glitch, not sure what I did wrong.
Before I installed LMS I mounted the LMS Cache that I have on a USB ext3
partition.
The install of LMS put a new Cache on the pCP boot disk
(/mnt/mmcblk0p2/tce/slimserver), so 2 caches, with
paul- wrote:
> LMS settings would have nothing to do with pCP
then a 7.9.1 bug (not present in 7.9.0)
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
Same here, fresh install of pCP and LMS [OK]
still need to reset: MyMusic->Radom Mix->[Select All]
(is this a LMS bug or a pCP bug?)
Tony
SBTouch SBRadio
Tony T's Profile:
paul- wrote:
> The repo is here. http://picoreplayer.sourceforge.net/tcz_repo/8.x
> You can browse the repo from any browser.
>
> It looks up to me, but we have seen problems with certain DNS servers
> not resolving sourceforge properly.
It been up intermittently. I was able to d/l pCP
Tony T wrote:
> Looks like it was a sourceforge issue, but its working now.
but you won't be able to install LMS:
[ INFO ] Downloading LMS...
[ ERROR] There was a error downloading slimserver.tcz
[ INFO ] Retrying extension slimserver.tczin 5 seconds.
[ ERROR] There was a er
Tex wrote:
> I am trying to install LMS in 3.22 and it refuses to download the
> software. I believe this is because of troubles at Sourceforge but I
> thought that should've cleared up by now. Can anybody confirm?
Looks like it was a sourceforge issue, but its working now.
Tony
SBTouch
Tony T wrote:
> The Random Mix setting in My Music was cleared when I upgraded to 3.22
> Selected All and then as a Test, I "Saved my current configuration to
> the USB flash drive" and rebooted pCP, and it was cleared again:
happens with a pCP re-boot (not a LMS re-start
The Random Mix setting in My Music was cleared when I upgraded to 3.22
Reset and then as a Test, I "Saved my current configuration to the USB
flash drive" and rebooted pCP, and it was cleared again:
+---+
|Filename: Screen Shot
Tony T wrote:
> Thanks.
> Is there an option somewhere within pCP to expand egain? (didn't see
> it)
> (Just curious, I won't need to expand everything working fine with
> 3.22)
>
Found it! (bottom of main page)
Tony
sbp wrote:
> I think you are missing something, the increment starts at 100 Mb up to
> 1000 Mb then jumps to whole card.
Faulty memory on my part
I did pick the highest before whole card, thought it said 100MB, but
yes, 1G it is:
paul- wrote:
> LMS is under 50MB installed, it's the cache that takes up bunches of
> space if you have a big library.
> You can always expand again if you need.
Thanks.
Is there an option somewhere within pCP to expand egain? (didn't see it)
Tony
SBTouch SBRadio
paul- wrote:
> If you ever want to backup or copy the card, you really don't want to
> have it full. Even on my dev system, I don't even use 300MB
yeah, I thought that could be a benefit, but on my Mac, I backed up with
dd in Terminal and the image was 8G.
.but I didn't use any conv options,
Just updated to pCP 3.22.
When installing LMS and expanding the file system, is there any
benefit/disadvantage to selecting to use all available disk space?
I selected 100MB.
Tony
SBTouch SBRadio
Tony T's Profile:
I'll be doing my first update (3.21->3.22) soon.
I have my LMS Cache on an ext2 partition on a USB stick.
It looks like the update is as simple as first backing up the
configuration in pCP to the USB Stick before burning 3.22 to the SD
Card.
(I also keep a backup image of the 3.21 pCP, so if I
paul- wrote:
> The pCP team is pleased to announce piCorePlayer 3.22
>
> New Images are available for download 'HERE'
> (https://sourceforge.net/projects/picoreplayer/files/insitu/piCorePlayer3.22/)
>
> Change Log:
>
> Add support for exFat file systems.
>
>
Does this mean that the LMS
I was also just thinking about a BT Speaker as I wanted Stereo
.
.then I remembered that I can configure my 2 SB radios to Left Output
and Right Output and sync, and wala
Stereo!
Tony
SBTouch SBRadio
Tony T's
Greg Erskine wrote:
> Be cautious using wifi on your LMS.
>
> It means there will probably be a double wireless hop during playback.
>
> I recommend hardwiring (Ethernet) your LMS into your wireless router.
What's a "double wireless hop"?
Tony
SBTouch SBRadio
Thanks guys, seems its easy enough to do on my router (never did this
before, that's why I asked).
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
Is is possible to have a static IP address for a wireless pCP LMS?
Tony
SBTouch SBRadio
Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544
View this thread:
1 - 100 of 119 matches
Mail list logo