baggins wrote:
Hi,
First time user here...
I wanted to evaluate piCorePLayer to be used in a multiroom setup, so I
installed the latest version on a rpi B+ and have LMS 7.8 running on a
Vortexbox.
Using the analog output jack for the moment I can play music but I
cannot change the
Sucessfull install - once I'd worked out the IP address of the ethernet
port. I plugged in an HDMI display and keyboard to the Wandboard and
typed 'ifconfig'. Browsed into it and it loaded fine on my Quad.
Regards Alex
Servers:- QNAP TS-239 ProII 2x 2Tb SSOTS 4.14 LMS: 7.7.2 - r33893.
Testing
Excellent work chaps, now got 1.18 running on my PiB+ / IQ DAC+
combination. And a new IQcase to fit the B+ has been shipped today
according to an email. I've got a couple of friends who are about to
start new adventures with Squeezebox and this combination is likely to
be the way to go for them.
Having had great success with picoreplayer and IQAudio's PiDAC, I
recently got myself a Pi B+ and ordered a PiDAC+ which has just arrived.
Of course I didn't think that it might not work!! Problem is that when
the IQaudio setting is enabled in the squeezelite menu the pi refuses to
communicate
A quick message to say that I have successfully updated my Wandboard
Quad from CSOS to SOA following the instructions on page 1. My only
problems were :- 1/ Wandboard Ubuntu needed an update and install of
openSSH to allow me to login.
2/ On the first try the Wandboard wouldn't boot from the
Pascal Hibon wrote:
Have you tried it in the actual system where the WB will be used in?
I also use the analog output of the WB in my behind the ceiling project
and I had to apply a bit of attenuation in the amp because the output
was high enough for that application.
Thanks Pascal - I've
ab.wagener wrote:
Yes, its impossible to affect the output level in CSOS. You have to ssh
into the wandboard, userid and password is fedora, then type the
command alsamixer. With key F6 you choose the sound interface, with
key Up and Down you change the output level. The default level is
First post here - Just bought a Wandboard dual and would like to try
running the CSOS image on it - however I get 'Forbidden' when I try to
access the image file from the link on the
http://www.communitysqueeze.org/ page. I'm familiar with the process to
load a SD card - I have a few Rpi's two of
Thanks Jackofall - working fine with no problems
Regards Alex
Servers:-
QNAP TS-239 ProII 2x 2Tb SSOTS 4.14 LMS: 7.7.2 - r33893. Testing a
Vortexbox and a Wandboard.
Players:-
Powerline ethernet:-Squeezebox Duet - optical feed to Audiolab
8000DAC-Pre-Power in living room / Squeezebox Duet -
