I updated my CS from 4.2.1 to 4.3.0.
Once operation has been completed , the console feature in UI can't work
yet, then i try your method to change global config *.realhostip.com(default)
to realhostip.com and it works.
Hope this can help u .
Nux! Thanks for this link. I found this earlier through the list also.
I initially discounted it as it seemed to be talking about VM snapshots
on CentOS 6.5 and I'm having trouble with Volume snapshots on COS 6.4.
However, I checked what version of RPM I had installed:
Installed on my COS 6.4
Praveen,
I can confirm that User VPN for VPC works just like the User VPN for a normal
VR, but looking at your output below, you are missing eth2
Regards
Geoff Higginbottom
D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
geoff.higginbot...@shapeblue.com
-Original
Hi
I'm getting the same dns errors on the cloudstack Console
Restarted VM Console
And can ping and dns resolves fine from the consoles command prompt
rolled back to 4.2.1 it's fine
Please confirm if it's a bug
Regards
-Original Message-
From: ma y [mailto:breeze7...@gmail.com]
Amough is on the money
Fixed mine move from global settings
consoleproxy.url.domain
from *.realhostip.com to realhostip.com
Regards Martin
-Original Message-
From: Martin Knott [mailto:mkn...@novemgroup.co.uk]
Sent: 02 April 2014 10:15
To: users@cloudstack.apache.org
Subject: RE:
Hello,
Is it possible to run Virualbox vm Cloudstack vm using kvm as hypervisor
together? As my Virtualbox vm keep on getting stuck at starting state.
Sugandh
Hi,
I am trying to create system vms, in CS 4.3 with Xenserver 6.2
I am trying to create advance zone. I have 2nics.
1 for management network second is trunk.
I am getting below error
2014-04-02 15:18:28,827 DEBUG [o.a.c.s.i.TemplateDataFactoryImpl]
(consoleproxy-1:ctx-774da64a) template 1 is
Thanks Geoff. Actually, eth1 for VPC router is missing.
When I looked at log file, surprisingly a request has been sent to create
router VM with two NICs(one link local and other public) whereas, the router
was created with only one NIC.
Any thoughts? fyi, I'm running CloudStack 4.3 with KVM
Yes Benoit, I have 40% of free public IPs available. So, that should not be an
issue.
I don’t see any errors in log file too. Have you noticed any exceptions in log
files by any chance when you encountered this issue?
Thanks,
Praveen Kumar
-Original Message-
From: benoit lair
Hello all,
I have two servers, one running both Cloudstack-server and Cloudstack-agent and
the other one only running Cloudstack-agent.
How do I remove the second host from Cloudstack.
Thanks,
Sugandh
Yes, i found exceptions in the log file, but the reason was because i ran
out of public ips.
Could you paste the complete mgmt log file onto pastebin.com ?
Have you already succeded with the creation of a shared network including
the creation of a vr vm ? Did it take a public ip ?
By the past, i
Hi Yitao,
xenbr0 : acting as Management network and no VLAN is assigned to it
xenbr1 : acting as public, guest storage network. All of this are in same
VLAN.
Also I have given same name-label as here in Cloudstack network
configuraion.
I don't know much about xen VLAN networking..if anything
Hi,
I am building a new small CloudStack. I have the Managment server and
DB together, and have a separate Storage server. The UI is operational,
so some success.
I would now like to add a host. I followed this guide
Can you explain what you meant and what are you trying to do? Are you
trying to run a VirtualBox VM in Cloudstack or vice versa?
On Wed, Apr 2, 2014 at 3:13 AM, Sugandh S s.suga...@rocketmail.com wrote:
Hello,
Is it possible to run Virualbox vm Cloudstack vm using kvm as hypervisor
On 2014-04-02, 1:34 AM, Chinu wrote:
Hello all,
Please can someone advice how to create an LXC template image in tar
format to spawn containers in KVM for Cloudstack version 4.2 or 4.3
Regards,
Chinu
I have that. This is for a CentOS image. I apologize for the formatting,
I am using
On 2014-04-02, 1:34 AM, Chinu wrote:
Hello all,
Please can someone advice how to create an LXC template image in tar
format to spawn containers in KVM for Cloudstack version 4.2 or 4.3
Regards,
Chinu
Ok, the output was not as good as I though. Use this link instead :)
Hello all,
Is there anybody here who knows how to check if there is enough
infrastructure available before the virtual machine deployment?
Regards,
Felippe Raposo.
Sanjeev,
Clearly the problem is in the VR, since I can see activities (using tcpdump) in
my VR when I try to telnet to any external server on port 80 on my vm's. I
enabled LOGGING on iptables in the VR and can see packets being dropped. Even
after I make iptables everything ACCEPT, I can't
I removed the vLAN and swapped eth0 with cloudbr0 before it would even
communicate. Not sure if that's a typo in the documentation, or if I've
just kludged it through.
Now when I attempt to add the host I get this output from setup.log
DEBUG:root:execute:uname -r
DEBUG:root:execute:uname -m
I re-did the whole thing again and this time it works perfectly. The only
difference that I can tell is that in the new network offering with F5 as
loadbalancer, I set the default egress policy to deny. Then I went ahead and
set the egress allow policy on the the SourceNAT external IP for
Cant you just check the dashboard area? It shows resource consumption. Or
is there something else your looking for?
On Apr 2, 2014 11:34 AM, Felippe da Motta Raposo
felippe.ges...@corp.globo.com wrote:
Hello all,
Is there anybody here who knows how to check if there is enough
On 02.04.2014 08:38, Thomas O'Dowd wrote:
Anyway - decided to
uninstall my package and install the 355 version that you were using.
After installing I rebooted. I really didn't expect anything to change
but Volume Snapshots now work! YEAH!
Glad it works.
I'd still recommend my approach,
Finally I have been able to add a host.
This failed for 2 reasons, firstly I didn't edit libvirtd.conf
correctly; with mdns_adv = 1 , it should equal 0, this prevented
libvirtd from starting, and thus in turn cloudstack-agent.
Secondly, I don't know if there's a typo in the documentation, but
Is there a posted procedure for removing a node from a mgmt cluster?
Are these two lines normal in the managment-server.log file?
2014-04-02 23:59:26,027 DEBUG
[storage.secondary.SecondaryStorageManagerImpl] (secstorage-1:null) Zone 1
is ready to launch secondary storage VM
2014-04-02 23:59:26,116 DEBUG [cloud.consoleproxy.ConsoleProxyManagerImpl]
Hey Folks,
Hoping for some assistance here. Running cloudstack 4.0.2
what does avoid set mean? and how do i enable my kvm hosts?
Here is the logging from the management head during system vm creation-
Any and all help is appreciated!
2014-04-02 17:48:58,264 DEBUG
Hello,
It appears as if I am unable to provision instances because for some reason
Cloudstack cannot find a suitable storage pool. Here is the information
from the log file for one instance I attempted to provision:
2014-04-03 00:37:43,459 DEBUG [cloud.api.ApiServlet]
(catalina-exec-11:null)
I follow this instruction
http://docs.cloudstack.apache.org/projects/cloudstack-release-notes/en/latest/rnotes.html#upgrade-from-4-2-0-to-4-3;
to do update work.
When create a new VR , i get this :
WARN [kvm.resource.LibvirtComputingResource]
(agentRequest-Handler-5:null) Timed out:
Does anyone know if there is a maximum amount of service offerings that can be
created?
Hello,
Can anyone from the cloud stack guru's please help with the below issue?
Kind Regards
Amin
-Original Message-
From: Amin Samir
Sent: Tuesday, 1 April 2014 1:29 PM
To: users@cloudstack.apache.org
Subject: Cloud Stack 4.2.1 issue (Unable to start instance due to DB Exception)
I have checked the QOS settings on the VM, they are all set to 25600Kbps
regardless of what I set the value to in the network offering. Is there
something that I am missing, or are others also experiencing this issue?
On 3/27/14, 3:43 AM, Sanjeev Neelarapu sanjeev.neelar...@citrix.com
wrote:
In
Sorry that does not make sense to me. If you have migrated to Cloudstack
from VirtualBox, what exactly do you want to start on VB now? A new VM or
the old one which got migrated out? If the old VM is still in the system
you can start with VirtualBox, I do not see the problem. But I suspect I am
Hi Sugandh,
Put the host you want to remove in maintenance mode and then delete from CS.
-Sanjeev
-Original Message-
From: Sugandh S [mailto:s.suga...@rocketmail.com]
Sent: Wednesday, April 02, 2014 5:24 PM
To: users@cloudstack.apache.org
Subject: How do I remove a host from Cloudstack
For User VM, I think you have set network rate in the service offering. Or
globally in vm.network.throttling.rate. If not defined in service offering, it
picks the global setting as the default value.
-Original Message-
From: Xerex Bueno [mailto:xbu...@lpsintegration.com]
Sent:
34 matches
Mail list logo