Re: When i update 4.2.1 to 4.3.0,console don't work

I updated my CS from 4.2.1 to 4.3.0. Once operation has been completed , the "console" feature in UI can't work yet, then i try your method to change global config "*.realhostip.com"(default) to "realhostip.com" and it works. Hope this can help u .

Re: Snapshot exceptions on 4.2.1 with NFS and S3

Nux! Thanks for this link. I found this earlier through the list also. I initially discounted it as it seemed to be talking about VM snapshots on CentOS 6.5 and I'm having trouble with Volume snapshots on COS 6.4. However, I checked what version of RPM I had installed: Installed on my COS 6.4 box

RE: VPN for VPC feature in 4.3

Praveen, I can confirm that User VPN for VPC works just like the User VPN for a normal VR, but looking at your output below, you are missing eth2 Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 [email protected] -Original Message

RE: When i update 4.2.1 to 4.3.0,console don't work

Hi I'm getting the same dns errors on the cloudstack Console Restarted VM Console And can ping and dns resolves fine from the consoles command prompt rolled back to 4.2.1 it's fine Please confirm if it's a bug Regards -Original Message- From: ma y [mailto:[email protected]] Sent:

RE: When i update 4.2.1 to 4.3.0,console don't work

Amough is on the money Fixed mine move from global settings consoleproxy.url.domain from *.realhostip.com to realhostip.com Regards Martin -Original Message- From: Martin Knott [mailto:[email protected]] Sent: 02 April 2014 10:15 To: [email protected] Subject: RE: W

Is it possible to run Virualbox vm & Cloudstack vm using kvm as hypervisor together?

Hello, Is it possible to run Virualbox vm & Cloudstack vm using kvm as hypervisor together? As my Virtualbox vm keep on getting stuck at starting state. Sugandh

Unable to deploy systemvms

Hi, I am trying to create system vms, in CS 4.3 with Xenserver 6.2 I am trying to create advance zone. I have 2nics. 1 for management network & second is trunk. I am getting below error 2014-04-02 15:18:28,827 DEBUG [o.a.c.s.i.TemplateDataFactoryImpl] (consoleproxy-1:ctx-774da64a) template 1 is

RE: VPN for VPC feature in 4.3

Thanks Geoff. Actually, eth1 for VPC router is missing. When I looked at log file, surprisingly a request has been sent to create router VM with two NICs(one link local and other public) whereas, the router was created with only one NIC. Any thoughts? fyi, I'm running CloudStack 4.3 with KVM

Re: VPN for VPC feature in 4.3

Hi Praveen, I already have this issue with vpc vr : Have you checked if you have some public ip adresses available on your zone ? Regards, Benoit. 2014-04-02 12:24 GMT+02:00 Praveen Buravilli : > Thanks Geoff. Actually, eth1 for VPC router is missing. > > When I looked at log file, surprisin

Re: Unable to deploy systemvms

Hi Punith, Thanks for reply, I have already uploaded systemvm64template-2014-01-14-master-xen.vhd.bz2 in secondary . [root@con-xen ~]# ls -lR /vol/ /vol/: total 8 drwxr-xr-x 2 root root 4096 Apr 2 12:46 primary drwxr-xr-x 3 root root 4096 Apr 2 12:14 secondary /vol/primary: total 4 -rw-r--r--

RE: VPN for VPC feature in 4.3

Yes Benoit, I have 40% of free public IPs available. So, that should not be an issue. I don’t see any errors in log file too. Have you noticed any exceptions in log files by any chance when you encountered this issue? Thanks, Praveen Kumar -Original Message- From: benoit lair [mailto:

How do I remove a host from Cloudstack agent?

Hello all, I have two servers, one running both Cloudstack-server and Cloudstack-agent and the other one only running Cloudstack-agent. How do I remove the second host from Cloudstack. Thanks, Sugandh

Re: VPN for VPC feature in 4.3

Yes, i found exceptions in the log file, but the reason was because i ran out of public ips. Could you paste the complete mgmt log file onto pastebin.com ? Have you already succeded with the creation of a shared network including the creation of a vr vm ? Did it take a public ip ? By the past, i

Re: Unable to deploy systemvms

Hi Yitao, xenbr0 : acting as Management network and no VLAN is assigned to it xenbr1 : acting as public, guest storage network. All of this are in same VLAN. Also I have given same "name-label" as here in Cloudstack network configuraion. I don't know much about xen VLAN networking..if anything wr

Re: Unable to deploy systemvms

Tejas, Did you add the network label names in Cloudstack ? You need to specify the network label name in Cloudstack that are configured in XenServer. I'm suspecting that the current issue is that CloudStack cannot map the Storage Network from is config in XenServer so xenserver cannot reach the s

Adding a host

Hi, I am building a new small CloudStack. I have the Managment server and DB together, and have a separate Storage server. The UI is operational, so some success. I would now like to add a host. I followed this guide https://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.2.0/html/Instal

Re: Is it possible to run Virualbox vm & Cloudstack vm using kvm as hypervisor together?

Can you explain what you meant and what are you trying to do? Are you trying to run a VirtualBox VM in Cloudstack or vice versa? On Wed, Apr 2, 2014 at 3:13 AM, Sugandh S wrote: > Hello, > > Is it possible to run Virualbox vm & Cloudstack vm using kvm as hypervisor > together? As my Virtualbox

Re: LXC template

On 2014-04-02, 1:34 AM, Chinu wrote: Hello all, Please can someone advice how to create an LXC template image in tar format to spawn containers in KVM for Cloudstack version 4.2 or 4.3 Regards, Chinu I have that. This is for a CentOS image. I apologize for the formatting, I am using t

Re: LXC template

On 2014-04-02, 1:34 AM, Chinu wrote: Hello all, Please can someone advice how to create an LXC template image in tar format to spawn containers in KVM for Cloudstack version 4.2 or 4.3 Regards, Chinu I have that. This is for a CentOS image. I apologize for the formatting, I am using t

Re: LXC template

On 2014-04-02, 1:34 AM, Chinu wrote: Hello all, Please can someone advice how to create an LXC template image in tar format to spawn containers in KVM for Cloudstack version 4.2 or 4.3 Regards, Chinu Ok, the output was not as good as I though. Use this link instead :) http://pastebin

Check Virtual Machine deployment

Hello all, Is there anybody here who knows how to check if there is enough "infrastructure" available before the virtual machine deployment? Regards, Felippe Raposo.

Re: No outbound traffic with F5 as loadbalancer network offering

Sanjeev, Clearly the problem is in the VR, since I can see activities (using tcpdump) in my VR when I try to telnet to any external server on port 80 on my vm's.  I enabled LOGGING on iptables in the VR and can see packets being dropped.  Even after I make iptables everything ACCEPT, I can't go

Re: Adding a host

I removed the vLAN and swapped eth0 with cloudbr0 before it would even communicate. Not sure if that's a typo in the documentation, or if I've just kludged it through. Now when I attempt to add the host I get this output from setup.log DEBUG:root:execute:uname -r DEBUG:root:execute:uname -m DEBU

Re: No outbound traffic with F5 as loadbalancer network offering

I re-did the whole thing again and this time it works perfectly.  The only difference that I can tell is that in the new network offering with F5 as loadbalancer, I set the default egress policy to deny. Then I went ahead and set the egress allow policy on the the SourceNAT external IP for the

Re: Check Virtual Machine deployment

Cant you just check the dashboard area? It shows resource consumption. Or is there something else your looking for? On Apr 2, 2014 11:34 AM, "Felippe da Motta Raposo" < [email protected]> wrote: > Hello all, > > > Is there anybody here who knows how to check if there is enough > "inf

Re: Snapshot exceptions on 4.2.1 with NFS and S3

On 02.04.2014 08:38, Thomas O'Dowd wrote: Anyway - decided to uninstall my package and install the 355 version that you were using. After installing I rebooted. I really didn't expect anything to change but Volume Snapshots now work! YEAH! Glad it works. I'd still recommend my approach, though

Re: [SOLVED] Adding a host

Finally I have been able to add a host. This failed for 2 reasons, firstly I didn't edit libvirtd.conf correctly; with mdns_adv = 1 , it should equal 0, this prevented libvirtd from starting, and thus in turn cloudstack-agent. Secondly, I don't know if there's a typo in the documentation, but I

Removing a node from mgmt cluster

Is there a posted procedure for removing a node from a mgmt cluster?

Re: Removing a node from mgmt cluster

Michael, Check the admin guide in sections 11.4 and 11.5. On Wed, Apr 2, 2014 at 5:28 PM, Michael Phillips wrote: > Is there a posted procedure for removing a node from a mgmt cluster? > -- Zobotek, LLC 7941 Katy Freeway #256 Houston, TX 77024 281-216-0488 - Main Number http://www.zob

Is this normal?

Are these two lines normal in the managment-server.log file? 2014-04-02 23:59:26,027 DEBUG [storage.secondary.SecondaryStorageManagerImpl] (secstorage-1:null) Zone 1 is ready to launch secondary storage VM 2014-04-02 23:59:26,116 DEBUG [cloud.consoleproxy.ConsoleProxyManagerImpl] (consoleproxy-1:n

cannot start system vms

Hey Folks, Hoping for some assistance here. Running cloudstack 4.0.2 what does avoid set mean? and how do i enable my kvm hosts? Here is the logging from the management head during system vm creation- Any and all help is appreciated! 2014-04-02 17:48:58,264 DEBUG [cloud.vm.VirtualMachineManagerI

RE: Removing a node from mgmt cluster

11.4 and 11.5 refer to the KVM,XEN, or Vsphere hosts. I am talking about removing an actual management node that is running cloudstack. > Date: Wed, 2 Apr 2014 18:58:00 -0500 > Subject: Re: Removing a node from mgmt cluster > From: [email protected] > To: [email protected] > > Michael,

Unable to provision VMs

Hello, It appears as if I am unable to provision instances because for some reason Cloudstack cannot find a suitable storage pool. Here is the information from the log file for one instance I attempted to provision: 2014-04-03 00:37:43,459 DEBUG [cloud.api.ApiServlet] (catalina-exec-11:null) ===

4.2.1 update to 4.3.0 and create VR get a problem

I follow this instruction " http://docs.cloudstack.apache.org/projects/cloudstack-release-notes/en/latest/rnotes.html#upgrade-from-4-2-0-to-4-3"; to do update work. When create a new VR , i get this : WARN [kvm.resource.LibvirtComputingResource] (agentRequest-Handler-5:null) Timed out: /usr/shar

Service Offering Maximum Limit

Does anyone know if there is a maximum amount of service offerings that can be created?

RE: Cloud Stack 4.2.1 issue (Unable to start instance due to DB Exception)

Hello, Can anyone from the cloud stack guru's please help with the below issue? Kind Regards Amin -Original Message- From: Amin Samir Sent: Tuesday, 1 April 2014 1:29 PM To: [email protected] Subject: Cloud Stack 4.2.1 issue (Unable to start instance due to DB Exception) Hell

Re: Limiting Bandwidth

I have checked the QOS settings on the VM, they are all set to 25600Kbps regardless of what I set the value to in the network offering. Is there something that I am missing, or are others also experiencing this issue? On 3/27/14, 3:43 AM, "Sanjeev Neelarapu" wrote: >In XenServer the bandwidth s

Re: Is it possible to run Virualbox vm & Cloudstack vm using kvm as hypervisor together?

No, I have a vm instance running on Cloudstack but I also want to start a vm on Virtualbox that was running before we migrated to Cloudstack. On Wednesday, 2 April 2014 8:14 PM, Mir Islam wrote: Can you explain what you meant and what are you trying to do? Are you trying to run a VirtualBox VM

Re: Is it possible to run Virualbox vm & Cloudstack vm using kvm as hypervisor together?

Sorry that does not make sense to me. If you have migrated to Cloudstack from VirtualBox, what exactly do you want to start on VB now? A new VM or the old one which got migrated out? If the old VM is still in the system you can start with VirtualBox, I do not see the problem. But I suspect I am not

RE: How do I remove a host from Cloudstack agent?

Hi Sugandh, Put the host you want to remove in maintenance mode and then delete from CS. -Sanjeev -Original Message- From: Sugandh S [mailto:[email protected]] Sent: Wednesday, April 02, 2014 5:24 PM To: [email protected] Subject: How do I remove a host from Cloudstack

RE: Check Virtual Machine deployment

Cloudstack Dashboard shows the available resources in the infrastructure. -Original Message- From: Felippe da Motta Raposo [mailto:[email protected]] Sent: Wednesday, April 02, 2014 9:04 PM To: [email protected] Subject: Check Virtual Machine deployment Hello all,

RE: Limiting Bandwidth

For User VM, I think you have set network rate in the service offering. Or globally in vm.network.throttling.rate. If not defined in service offering, it picks the global setting as the default value. > -Original Message- > From: Xerex Bueno [mailto:[email protected]] > Sent: Thu

Re: Is this normal?

Yes. On 03-Apr-2014, at 5:29 AM, Fred Newtz wrote: > Are these two lines normal in the managment-server.log file? > > 2014-04-02 23:59:26,027 DEBUG > [storage.secondary.SecondaryStorageManagerImpl] (secstorage-1:null) Zone 1 > is ready to launch secondary storage VM > 2014-04-02 23:59:26,116 DE

RE: Limiting Bandwidth

The network rate which you have defined in network offering takes effect only when you add additional network to VM. Not on the default network. To see how network rates are applied see https://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.1.1/html/Admin_Guide/network-rate.html . -

Re: Unable to deploy systemvms

Hi Dion, Thanks for the clue,I was missing 'cloud traffic label' there. One step ahead Now SSVM and CPVM is UP & running. I am able to ping both private ip but not Public ip from Management server and link local is also pinging from hypervisor . I tried SSVM health check. every thing fine. secsto