I have some question about directive in dma.conf file:
1) SMARTHOST is my computer that I use to send email with dma?
2) What is meaning of MAILNAME directive?
3) How can I specify mail's message with dma command?
Regards,
savio
--
only the paranoid will survive
Setup dma - /etc/mail/mailer.conf and just use your favorite MUA
(mailx, mutt, Thunderbird, ...). Just make sure its configured to send
mails through sendmail and not directly to your smarthost.
That is to say that if I want send mail with dma, then I need sendmail
or postfix?
--
only
) but especially how can write message mail with dma command?
2010/9/20 Matthias Schmidt matth...@dragonflybsd.org:
* dark0s Optik wrote:
I'm running Ubuntu 10.04 and I've installed with apt DragonFly Mail
Agent package (dma).
dma man page is the same that dragonflybsd dma man page, but I want to
know
I'm running Ubuntu 10.04 and I've installed with apt DragonFly Mail
Agent package (dma).
dma man page is the same that dragonflybsd dma man page, but I want to
know how I must
send mail with dma command.
Regards,
savio
--
only the paranoid will survive
I installed DragonFlyBSD over Samsung R580, but I think that it don't recognize
NIC card.
With Linux, my NIC card is:
07:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 4381 (rev 11)
The output of 'ifconfig -a' from DragonFlyBSD is:
sl0:...
ppp:
faith0:
lo0:.
How can
the ethernet output is:
no...@pci0:7:0:0:class=0x02 card=0x06144d chip=0x438111ab
rev=0x11 hdr=0x00
vendor='Marvell Semyconductor (Was: Galileo Technology Ltd)'
class=network
subclass=ethernet
2010/7/30 Sascha Wildner s...@online.de:
On 7/30/2010 16:30, dark0s Optik wrote:
I
How can I build a custom kernel if I cannot install dragonflybsd
system on my notebook?
2010/7/6 dark0s Optik shiftco...@gmail.com:
I'm not practice of BSD systems, but I want learn.
I must read page of custom kernel, but how can disable firewire
driver in DragonFlyBSD Kernel configuration
is the problem?
2010/7/6 Sascha Wildner s...@online.de:
On 7/5/2010 18:50, dark0s Optik wrote:
DragonFly don't install over my Sony Vaio and I want buy new notebook.
Wich notebook brand and model you recommend me for installing dragonfly
system:
I'm running DragonFly on a VAIO VGN-Z51XG.
What VAIO
I'm not practice of BSD systems, but I want learn.
I must read page of custom kernel, but how can disable firewire
driver in DragonFlyBSD Kernel configuration process?
2010/7/6 Matthew Dillon dil...@apollo.backplane.com:
:I have sony vaio VGN-NR21Z and when I load dragonfly system,
:then I
In wich language is written pkgsrc framework?
--
only the paranoid will survive
DragonFly don't install over my Sony Vaio and I want buy new notebook.
Wich notebook brand and model you recommend me for installing dragonfly system:
- hp;
- asus;
- acer;
- samsung
.
--
only the paranoid will survive
-- Forwarded message --
From: dark0s Optik shiftco...@gmail.com
Date: 2010/7/5
Subject: Re: about pkgsrc
To: Stathis Kamperis ekamp...@gmail.com
for example in wich language is written pkg_add or pkg_info
2010/7/5 Stathis Kamperis ekamp...@gmail.com:
It's written in NetBSD make
For example in wich language is written pkg_add or pkg_info?
2010/7/5 dark0s Optik shiftco...@gmail.com:
for example in wich language is written pkg_add or pkg_info
2010/7/5 Stathis Kamperis ekamp...@gmail.com:
It's written in NetBSD make. The latter is written in C.
2010/7/5 dark0s Optik
How can I disablew this annoying message:
uhub2: device problem (SET_ADDR_FAILED, disabling port 1)
--
only the paranoid will survive
I didn't know about iXsystems. It has good machines, but:
1) where is the price?
2) I'm italian and not american, how can I receive that machines?
2010/6/16 Tomas Bodzar tomas.bod...@gmail.com:
On Wed, Jun 16, 2010 at 10:19 AM, dark0s Optik shiftco...@gmail.com wrote:
1) But I think
I'd like to buy a dell server and to install DragonFly.
I notice that BSD is more problems than Linux installation, for example,
I not be successful to install any BSD system over my notebook.
My question are:
1) DragonFlyBSD install successfully over system like this:
which
will be running of course. Anyway the golden rule Use what's
appropriate for you and your use is still valid. It can be anything
from any BSD, over Linux, Solaris/OpenSolaris to Windows or MacOS.
BTW what notebook do you have?
On Wed, Jun 16, 2010 at 9:09 AM, dark0s Optik shiftco
I've installed DragonFly BSD in qmeu 0.12.
Now I want configure usb pendrive and network:
1) How can I configure DragonFly network in qemu.
2) How can I mount usb when DragonFly is into qemu.
--
only the paranoid will survive
How can I mount my pendrive into dragonflybsd?
Thank you in advance to answers
--
only the paranoid will survive
I tried to launch dragonfly x86 2.6.3 installation into virtualbox
3.2, but it crash.
The output is:
Debugger(panic):
stopped at 0xc0537b3c movb $0, 0xc070fd34
How can to install dragonfly into virtualbox?
--
only the paranoid will survive
I'd like to partecipate of Google SoC 2009 for DragonFlyBSD, but I
don't know if I can.
I'm private and I'm not a student, but I was it.
Are there specific categories of people that they partecipate at GSoC
or anyone can partecipate?
Savio
--
only the paranoid will survive
to realize
a graphical user interface that it has that feature. I'd like implement a GUI
because it's easest to use, and that is important for managing large
numbers of servers
in enterprise server farm.
savio
2008/12/7 [EMAIL PROTECTED]:
dark0s Optik writes:
I don't know who can interest, but I want
tried to dig any deeper, but hope, this friendly
suggestions/notes will help you for mutual benefit of the community.
Thanks for the efforts and good luck in this great project!
2008/11/15 dark0s Optik [EMAIL PROTECTED]:
I modified program and I tell you test it, especially if it download
I modified program and I tell you test it, especially if it download package
in pkg_add operation and if it works.
I have a very very slow internet connection and cannot test it fastly.
The file mirror.conf must be located in /usr/pkg/share/pkgsrcgfe directory
and contains mirror where pkg_add
Where is defined getline C function in DragonFlyBSD ?
I think that I can solve problem with pkg_add in pkgsrcgfe in some day.
savio
2008/11/11, dark0s Optik [EMAIL PROTECTED]:
The code is attached and is DragonFlyBSD licensed.
I must add mirror button for choose mirror in pkg_add operation.
The code must have improving.
Can you tell me
]:
On Tue, 11 Nov 2008 00:13:02 +0100
dark0s Optik [EMAIL PROTECTED] wrote:
My code can't be included in DragonflyBSD directly, because it need
for Gtk+ 2, Glib and related library. What is pattern for copyright
me.
It's sounding to me like a good idea would be to commit it to
pkgsrc
Hi all, I write a lightweight GUI for PkgSrc for DrgonFlyBSD in C
language named pkgsrcgfe, that is to say PkgSrc Graphical Front End.
It is a simple and little program that it permits to handle
graphically pkg_search, pkg_add, pkg_info and pkg_delete.
I written this program for DragonFly and I'd
cp /sys/config/VKERNEL /sys/config/VKERNEL+HAMMER
echo 'options HAMMER' /sys/config/VKERNEL+HAMMER
# you should also change `ident' line to reflect new file name
# then the usual steps to build and install a kernel, as described in
build(7) (and vkernel(7))
cd /usr/src
Ok
in tcsh gcc `pkg-config gtk+-2.0 --libs --cflags` -o prova prova.c works
and
in bash gcc $(pkg-config gtk+-2.0 --libs --cflags) -o prova prova.c works
Thank you very much!
savio
2008/10/27, Ulrich Spoerlein [EMAIL PROTECTED]:
On Sun, 26.10.2008 at 21:21:22 +0100, dark0s Optik wrote:
#pkg
Ok, it works!
Best regards,
savio
2008/10/24, Thomas Nikolajsen [EMAIL PROTECTED]:
Now, I can set up two or more vkernel over a single DragonFly system.
How can I change in configuration phase for setting multiple vkernel?
You just make a copy of rootimg file and run kernel (in another
How can I running DragonFly with Hammer filesystem? (in vkernel environment!!)
Regards,
savio
--
only the paranoid will survive
I run vkernel, but it never happens, how can I know that vkernel is running?
2008/10/20, Sascha Wildner [EMAIL PROTECTED]:
dark0s Optik schrieb:
I finished procedure about building, installing and enabling vkernel. I
typed:
[...]
What is the wrong step in abobe procedure?
It would
I have typed:
mkdir /home/var.vkernel
ln -s /home/var.vkernel /var/vkernel
dd if=/dev/zero of=/var/vkernel/rootimg.01 bs=1m count=2048
vnconfig -c -s labels vn0 /var/vkernel/rootimg.01
disklabel -e vn0s0
after I close vi with :wq
and I typed
newfs /dev/vn0s0a
newfs: /dev/vn0s0a: in
I want to configure two virtual kernel on DragonFly with vkernel.
I read all documantation about vkernel, but I need know if I must set
up filesystem before or after compiling virtual kernel.
Regards,
savio
--
only the paranoid will survive
No, what I must modify?
2008/10/18, Nuno Antunes [EMAIL PROTECTED]:
On Sat, Oct 18, 2008 at 11:59 AM, dark0s Optik [EMAIL PROTECTED] wrote:
I have typed:
mkdir /home/var.vkernel
ln -s /home/var.vkernel /var/vkernel
dd if=/dev/zero of=/var/vkernel/rootimg.01 bs=1m count=2048
vnconfig -c
I am triyng to programming with gtk over DragonFly.
My sample code is the follows:
#include gtk/gtk.h
int main(int argc, char* argv[]) {
GtkWidget *window:
gtk_init(argc, argv);
window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
gtk_widget_show(window);
gtk_main();
return 0;
}
The
Ok, newfs /dev/vn0s0a and mount /dev/vn0s0a /mnt done.
Now, I type:
#cd /usr/src
#make installworld DESTDIR=/mnt
make: don't know how to make installworld. Stop
#
2008/10/18, Nuno Antunes [EMAIL PROTECTED]:
On Sat, Oct 18, 2008 at 3:03 PM, dark0s Optik [EMAIL PROTECTED] wrote:
No, what I must
Hi all, I'am newbye about this OS.
I'd like to achieve this point found in DragonFly project page:
- Bring in support for UFS2, just the changes to extend the width of
some fields from 32 bits to 64 bits.
I'd like know I can try programming for DragonFly and how can I find
requested source for
I've a Slackware GNU/Linux with Qemu 0.9.1.
I installed DragonFlyBSD 2.0.1 over Qemu. dragonFly has ed0 ethernet
interface, but it don't connect to internet.
#cat /etc/rc.conf
...
...
ifconfig_ed0=DHCP
#ifconfig -a
lp0...
ed0 with IP address 10.0.2.15
How can I to do connect
Ok, but I Qemu on Slackware, and dragonFly on Qemu.
have you some suggestions?
regards,
saverio
2008/10/10 Michael Neumann [EMAIL PROTECTED]:
dark0s Optik wrote:
I've a Slackware GNU/Linux with Qemu 0.9.1.
I installed DragonFlyBSD 2.0.1 over Qemu. dragonFly has ed0 ethernet
interface
I have the following four problems:
1)
#acroread
(acroread:818): Pango-WARNING **: No Builtin or dynamically loaded
modules were found. Pango will not work correctly. This probably means
there was an error in the creation of:
/etc/opt/gnome/pango/pango.modules
You may be able to recreate
, instead in the system there is
libSDL-1.2.so.0.11.2
What is the problem?
2008/5/25, Justin C. Sherrill [EMAIL PROTECTED]:
On Sun, May 25, 2008 9:19 am, dark0s Optik wrote:
I have the following four problems:
Check for the existence of those .so files on your system. Also, check
: No Device Specified
(EE) default pointer: Cannot open input device
(EE) PreInit failed cannot open input device default pointer
No core pointer
What is the problem?
Thanks,
savio
2008/5/10 Andre LeClaire [EMAIL PROTECTED]:
dark0s Optik wrote:
I didn't find a modular-xorg-package in
http
Hi all, I'm configuring my X desktop, but X server outputs:
Fatal server error:
No valid FontPath can be found.
What is the problem?
Thanks,
savio
--
only the paranoid will survive
I didn't find a modular-xorg-package in
http://chlamydia.fs.ei.tum.de/pub/DragonFly/packages/DragonFly-1.12/stable/All/
2008/5/10 Cristi Magherusan [EMAIL PROTECTED]:
Hello,
On Fri, 2008-05-09 at 23:50 +0200, dark0s Optik wrote:
Hi all, I'm configuring my X desktop, but X server outputs
What is modular-xorg-fonts package in
http://chlamydia.fs.ei.tum.de/pub/DragonFly/packages/DragonFly-1.12/stable/All/
?
2008/5/10 Matthew Dillon [EMAIL PROTECTED]:
:Hi all, I'm configuring my X desktop, but X server outputs:
:
:Fatal server error:
:No valid FontPath can be found.
:
:What
I have problem with packages download:
pkg_add
http://www.theshell.com/pub/DragonFly/packages/DragonFly-1.12/stable/All/acroread7-7.0.9nb1.tgz
ftp: Can-t connect to `2001:4830:2130::1`: No route to host
ftp: Can-t connect to `2001:4830:2130::1`: No route to host
ftp: Can-t connect to
pkg_info works well
2008/4/10, Jeremy C. Reed [EMAIL PROTECTED]:
On Thu, 10 Apr 2008, dark0s Optik wrote:
I have problem with packages download:
pkg_add
http://www.theshell.com/pub/DragonFly/packages/DragonFly-1.12/stable/All/acroread7-7.0.9nb1.tgz
ftp: Can-t connect to `2001:4830
I must to set italian keyboard at X.org, but I don`t have xorg.conf file.
I suppose that I must create it with xorgconfig, it`s right?
--
only the paranoid will survive
I 'd like to install DragonFly 1.12.1 on my Sony Vaio NR21Z, but
whilst DragonFly load, it appears:
RAM parity error, likely hardware failure
Fatal trap 19: non-maskable interrupt trap while in kernel mode
instruction pointer = 0x8:0xc04a7750
stack pointer = 0x10:0xc07789e4
frame
Does it exist x-server and x-client packages?
2008/3/28, Joerg Sonnenberger [EMAIL PROTECTED]:
On Fri, Mar 28, 2008 at 06:23:44AM +0100, dark0s Optik wrote:
Hi all, I would like a minimal window manager over DragonFly, like
Blackbox, but I don't understand how to install X server
Hi all, I would like a minimal window manager over DragonFly, like
Blackbox, but I don't understand how to install X server.
In xorg 6, we had x server, but now, what components I must to install over OS?
Thank you in advance to response.
--
only the paranoid will survive
If I understood, you want to port NFSv4 over DragonFly BSD.
I would like to help in nfsv4 porting.
I must to contact anyone?
--
only the paranoid will survive
If I understood, you want to port NFSv4 over DragonFly BSD.
I would like to help in nfsv4 porting.
I must to contact anyone?
I don't think the port would be that much work. (but if someone can do it
in a day, they're a lot faster than I am:-)
The client and server are
now structured so the
Ok, I will follow your suggestions.
Thank you for suggestions.
savio
I think you have deciide exactly *what* you want to program. If
you want to mess around with hardware, e.g. blinking an LED or driving
a LED display or something like that, or build a small controller such
as a thermostat
But I don't want to program in assembly, but in C language. For
example, I would like to analyze C code of FreeBSD or Linux for
processors. I'm not capable to assemble hardware.
2008/1/21, Matthew Dillon [EMAIL PROTECTED]:
I think you have deciide exactly *what* you want to program. If
I'm reading a book about general architecture of microprocessors, and
I am reading also a book of UltraSPARC microprocessor. I would like to
learn how to program a processor, but in C language, and not in
assembly!
I would like to port a OS over UltraSPARC, for istance over DragonFly.
Well I'm
Indeed, I would like ti understand how programming ultrasparc
microprocessors. It is a my personal interest, but I want use
DragonFly.
2008/1/18, Erik Wikström [EMAIL PROTECTED]:
On 2008-01-18 18:54, dark0s Optik wrote:
2008/1/14, Nicolas Thery [EMAIL PROTECTED]:
2008/1/14, dark0s Optik
Ok, this is the best solution!
Now, I would like to analyze freebsd code about sparc64 architecture.
Can anyone to suggest me documents and people for helping to analyze above code?
Thanks,
dark0s
2008/1/14, Nicolas Thery [EMAIL PROTECTED]:
2008/1/14, dark0s Optik [EMAIL PROTECTED]:
How can I
How can I to get source code of DragonFly and FreeBSD?
Thank you in advance to help
Regards
--
only the paranoid will survive
I would like to analize the FreeBSD NFSv4 implementation:
http://www.citi.umich.edu/projects/nfsv4/bsd-nfsv4/
After, I would like to generate patch for DragonFly.
Is there someone that it can help me in this insane adventure?
Best Regards
--
only the paranoid will survive
I all, I am newbye about DragonFly.
I would know if DragonFly can to interact with Xen.
How can it to do for porting Xen over DragonFly BSD?
Thanks
--
only the paranoid will survive
63 matches
Mail list logo