> We can add defines but someone would need to research it. Linux does have
> a RTSIG_MAX (set to 32) in which we do not appear to have.
> There is also a __SIGRTMAX define in linux (set to 64). I don't see anything
> for
> a RTSIG_MIN, however.
I don't know if adding just the defines makes a
On Thu, 26 Mar 2015 00:52:11 +0100, Bernardino Gonzalez
wrote:
Trying to install dragonflybsd but I get "/sbin/disklabel64 -B -r -w
ad1s1
auto FAILED with return code 1"
There should be an option (in the dialog showing this error) to show the
log file. Can you select it and see if there
On Wed, 04 Mar 2015 08:29:47 +0100, Remi Locherer
wrote:
Hi,
I installed dragonfly on a server with a 2TB raid volume. The installer
just used 500GB out of the 2TB. I could grow the slice and partition
with fdisk and disklabel64. How can I grow hammer?
You can't.
hurricane# fdisk da0
***
On Tue, 03 Mar 2015 20:10:11 +0100, wrote:
now i tried it and yes, the mpt driver supports that controller, but the
writes are very slow: 16 MB/sec.
i think that is due to outdated driver or the write cache is missing.
how can i enable the write cache in dfly?
See the mptutil(8) manual page
On Sun, 01 Mar 2015 16:10:52 +0100, Vitaly Shevtsov
wrote:
Hello! In recent snapshot there is no git in base system. I know I can
easily install it with pkg. But it is strange to see cdrecord and
bind-tools installed but not git, which is one of the main tool in
DragonFly (especially on -mast
On Sun, 01 Mar 2015 16:10:52 +0100, Vitaly Shevtsov
wrote:
Hello! In recent snapshot there is no git in base system. I know I can
easily install it with pkg. But it is strange to see cdrecord and
bind-tools installed but not git, which is one of the main tool in
DragonFly (especially on -mast
Hi all,
if you upgraded in the time window between Wed Feb 25 04:55:09 2015 +0100
and Wed Feb 25 22:13:42 2015 +0100 you might get the following error when
running 'make' due to a mistake I made:
make: "/usr/share/mk/sys.mk" line 66: Malformed conditional
((${CCVER:Mgcc4[89]} || ${CCVER:M
On Fri, 20 Feb 2015 15:41:03 +0100, Baurzhan Muftakhidinov
wrote:
Than wasn't the case too, I do use startxfce4 but no success.
I notice that when I do X -configure, it creates xorg.conf.new
with 2 Screens and 2 graphic cards, where first one uses intel
and second one uses vesa driver. I don'
On Fri, 09 Jan 2015 15:14:40 +0100, karu.pruun
wrote:
I compiled polkit and glib with gdb symbols but it seems I might need
more symbols in perhaps other libraries? In any case, so far the call
to sendto() seems to occur in a piece of code that I can't step in.
Likely, libc, at least. Our w
On Tue, 06 Jan 2015 04:53:58 +0100, Predrag Punosevac
wrote:
I have a few installation related questions. Please feel free to point
me to a manual pages.
1. I see that it is possible to set up PXE server from the installer. Is
there a way to have fully unattended installation of DF? I am thi
On Fri, 26 Dec 2014 07:01:16 +0100, Predrag Punosevac
wrote:
Is there anybody who is looking at the sensoring framework on DF at the
moment? In particular I am interested in something along the lines of
OpenBSD stellar native sensorsd daemon. FreeBSD which shares the same
heritage has some se
On Fri, 26 Dec 2014 22:16:27 +0100, Roland Sadowski
wrote:
Unfortunately Vultr only allows ISOs up to 5192MB in size (current DF
ISO is a bit larger). I tried it, but without success.
I don't understand. Our ISOs certainly are a lot smaller than 5192MB.
Sascha
On Sun, 07 Dec 2014 01:44:48 +0100, Romick
wrote:
Also suggested in /etc/sysctl.conf:
hw.cpu_mwait_halt=0x44
hw.cpu_mwait_spin=0x11
Now these sysctls are read-only. Which C-states I must use with
machdep.mwait.CX.[idle, spin]?
machdep.mwait.CX.supported: C1/0 C1/1 C2/0 C3/
On Thu, 06 Nov 2014 06:00:53 +0100, Mehmet Erol Sanliturk
wrote:
I have applied the above steps to previously installed .img system :
When USB NIC is attached , it listed as
ugen6.2: < Moschip Semiconductor > at usbus6
# kldstat
listed the following :
kernel
acpi.ko
ehci.ko
[...]
W
On Tue, 04 Nov 2014 14:44:34 +0100, Mehmet Erol Sanliturk
wrote:
During writing .img to USB stick , it took very long time without
reaching
to completion .
With a hope , I recorded it to a DVD , fortunately , it took very short
time for recording and it worked for installation .
Mehmet,
On Tue, 04 Nov 2014 09:25:00 +0100, Mehmet Erol Sanliturk
wrote:
I should download a new snapshot because without Dragonfly BSD Internet
connection I can not apply any change and , I do not know Dragonfly BSD
to
make such updates .
I do not know which snapshot will contain the changes in
On Thu, 30 Oct 2014 04:09:05 +0100, Mehmet Erol Sanliturk
wrote:
1. USB network cards are NOT recognized during install boot and
configuration ( and after
reboot in 3.8.2 by ifconfig )
Ok I've ported FreeBSD's mos(4) driver and pushed it to master. Please
test with your adapter.
You
On Fri, 31 Oct 2014 11:39:07 +0100, Mehmet Erol Sanliturk
wrote:
Adapter is :
http://www.digitus.info/en/products/network/fast-ethernet-network/network-interface-cards/
http://www.digitus.info/en/products/network/fast-ethernet-network/network-interface-cards/fast-ethernet-usb-20-adapter-dn-1
On Thu, 30 Oct 2014 04:09:05 +0100, Mehmet Erol Sanliturk
wrote:
Dears All ,
During installation of DragonFly 4.0.0 RC , the following points may
require improvement :
1. USB network cards are NOT recognized during install boot and
configuration ( and after
reboot in 3.8.2 by ifconfig
On Tue, 02 Sep 2014 06:57:05 +0200, Andrey Oktyabrskiy
wrote:
Good day.
I tried to compile recent master and got this error:
/usr/src/sys/netinet/in_pcb.c: In function 'in_pcbremconnhash':
/usr/src/sys/netinet/in_pcb.c:1687:20: error: unused variable 'pcbinfo'
[-Werror=unused-variable]
c
On Sat, 23 Aug 2014 02:57:54 +0200, lhmwzy wrote:
OK,run cat xx.tar.gz|gzip -cd|tar -xvf - and get the same error in the
end:
tar: Error exit delayed from previous errors.
The problem seems to be that our tar cannot handle certain pathnames
present in this files and it does error about th
Hello,
if you are using master, please do a full buildworld, buildkernel,
installkernel, installworld upgrade after the commit
ba87a4ab252df80acecfc25acfd9e406ea7f4c93 ("kernel/spinlock: Add a
description to struct spinlock.").
Sascha
On Fri, 22 Aug 2014 09:42:47 +0200, k simon wrote:
Hi,Lists,
Today I try to scp some file to a ubuntu server, and I missed the
password, so I type ctrl-c, then the server then panic.
And the box have some services, so I cold restart it and have not take
the messages on screen.
Just to cl
On Thu, 21 Aug 2014 11:55:24 +0200, lhmwzy wrote:
Please let me know if requre infos.
cat xx.tar.gz|gzip -d|tar -xvf -
this also give the same error.
tar: Error exit delayed from previous errors.
I mean, you are using -v for tar, so there should be more output from the
tar command (the l
On Thu, 21 Aug 2014 11:37:34 +0200, lhmwzy wrote:
I use tar to extract a tar.gz file which created under FreeBSD 7.2 with
bsdtar 2.5.5.
But under DF,tar xzvf this file,last give me a error:
tar: Error exit delayed from previous errors.
uname -a:
DragonFly bxzx 3.8-RELEASE DragonFly v3.8.2-RELE
On Mon, 18 Aug 2014 14:13:33 +0200,
wrote:
I can't seem to get my wireless working on my laptop when using
DragonflyBSD.
# dmesg | grep Centrino
iwn0: mem 1xf140-0xf1401fff irq 17
at device 0.0 on pci3
Is it related to https://bugs.dragonflybsd.org/issues/2675 ?
I.e., does ifconf
On Tue, 29 Jul 2014 12:11:06 +0200, s4 wrote:
Hello!
I trying to make tcsh show me russian characters in console on DragonFly
v3.8.1-RELEASE. Here is what i did:
# cat /etc/rc.conf
...
font8x8="cp866-8x8"
font8x14="cp866-8x14"
font8x16="cp866-8x16"
scrnmap="koi8-r2cp86
On Tue, 15 Jul 2014 12:03:39 +0200, k simon wrote:
Hi,Lists,
When I upgraded to the head from 3.8.1. It's crashed with "make
installworld". And report initrd faild. Then I cold restart it, it's
booted, but most of command can not issued.
Does another 'make installworld' work?
Hello,
Short story: The driver used for LSI Thunderbolt series RAID controllers
will be switched to a different driver soon. Read on for more details. If
you are unsure if your RAID controller is affected, you can check with
'pciconf -l'. Search the mfi line(s) and check if there is
"chip
On Wed, 18 Jun 2014 11:09:02 +0200, Pierre Abbat
wrote:
I just did git pull and built kernel and world and tried to install them.
installkernel succeeds, but installworld fails with this error:
install: /usr/include/FlexLexer.h: No such file or directory
I tried making upgrade before installw
On Sun, 15 Jun 2014 12:53:20 +0200, Sven Gaerner wrote:
Thanks for the patch. I applied that to my 3.8 branch, but it did not
help. The system still locks up.
I recently discovered a kernel message when trying to configure the
network. I guess I missed adding this message to the other mails.
On Thu, 05 Jun 2014 22:31:14 +0200, Sven Gaerner wrote:
On Thu, Jun 05, 2014 at 03:15:26PM +0200, Sven Gaerner wrote:
On Thu, Jun 05, 2014 at 08:46:22AM +0200, Sascha Wildner wrote:
> On Wed, 04 Jun 2014 22:25:59 +0200, Sven Gaerner
wrote:
>
> >That should not be a problem as
Hi,
I've removed some older network drivers from x86_64, see
http://lists.dragonflybsd.org/pipermail/commits/2014-June/270169.html
The main consequence for x86_64 users is that if your config is derived
from X86_64_GENERIC, buildkernel may error with:
Warning: device "ed" is unknown
In t
On Fri, 06 Jun 2014 04:36:11 +0200, Edward M
wrote:
Hello,
trying to upgrade from 3.6.2 to 3.8.0 amd64
After executing "make installworld" got a kernel panic and
typed message from trace and s, but i dont know how to save info from
ps in db>
will this info be enough to open a bug report?
On Wed, 04 Jun 2014 22:25:59 +0200, Sven Gaerner wrote:
That should not be a problem as neither wpa-supplicant nor hostapd are
loaded. Just running "ifconfig ath0 up" stops the system.
Would this not be wlan0? Like, "ifconfig wlan0 create wlandev ath0;
ifconfig wlan0 up"
Sascha
On Tue, 27 May 2014 15:40:38 +0200, karu.pruun
wrote:
This seems to be a Virtualbox problem: I just installed DragonFly
3.6.2 anew on Virtualbox 4.3.10 and ran into the same problem. The
other DFly 3.6.2 image that I am using and that runs fine was
installed using an older version of Virtualb
On Tue, 27 May 2014 14:45:06 +0200, karu.pruun
wrote:
On Tue, May 27, 2014 at 8:42 PM, Sascha Wildner wrote:
I can't check here at work, but do you remember (or can check it) if the
loading acpi/ehci loading issues were only occurring when booting from
the
installed system or if i
On Tue, 27 May 2014 13:38:22 +0200, karu.pruun
wrote:
I also now remember a guy in the #dragonflybsd IRC channel who had the
same
issue (also on VirtualBox) some weeks ago. I'll look a bit further
tonight
if I can find something.
Thanks for this.
I can't check here at work, but do yo
On Tue, 27 May 2014 10:00:15 +0200, karu.pruun
wrote:
On Tue, May 27, 2014 at 3:38 PM, Sascha Wildner wrote:
On Tue, 27 May 2014 05:19:03 +0200, karu.pruun wrote:
Something I noticed at 3.8.0RC: at boot, the kernel complains that it
cannot find
/boot/kernel/acpi
/boot/kernel/ehci
and
On Tue, 27 May 2014 05:19:03 +0200, karu.pruun
wrote:
Although this is not in the checklist, I'd like to point out a commit
that has not made it into the tree yet
http://bugs.dragonflybsd.org/issues/2671
I'll look at it.
Something I noticed at 3.8.0RC: at boot, the kernel complains that
On Mon, 05 May 2014 23:17:12 +0200, Franxones Smartel
wrote:
Hello...
I'm interested in installing DragonFlyBSD to my disk but...does it have
Onda msa190up
3G usb modem support? Thanks
Our ucom(4) in the new USB stack is not working correctly at the moment,
and it is a dependency for
On Thu, 10 Apr 2014 08:21:07 +0200, lhmwzy wrote:
change
local ffi_str = ffi.string
local C = ffi.C
local setmetatable = setmetatable
to
local ffi_str = ffi.string
local C = ffi.load ("libcrypto.so")
local setmetatable = setmetatable
It works well.
Do we know which lib is involved in the
On Fri, 04 Apr 2014 13:24:27 +0200, Ludo Beckers wrote:
I found nfe0 is correct here, so I adapted the rc.conf accordingly.
And after booting, does it work with that? As far as I know resolv.conf
should not need editing for the usual DHCP case.
Sascha
On Fri, 04 Apr 2014 13:09:28 +0200, John Marino
wrote:
You might want to use "ipconfig" to verify that your network card is
"em0", I didn't how how Sascha knew that.
Ah I misread, thought it was Virtual Box. So yeah, ifconfig (not ipconfig)
will show the actual one.
Sascha
On Fri, 04 Apr 2014 12:47:15 +0200, Ludo Beckers wrote:
/etc/rc.conf has this content:
# Basic rc.conf, adjust according to your needs
#
nfs_reserved_port_only="YES"
sshd_enable="YES"
usbd_enable="YES"
nfs_client_enable="YES"
rpc_umntall_enable="NO"
dumpdev="/dev/serno/5QZ48QQK.s1b"# via i
On Fri, 04 Apr 2014 11:42:00 +0200, Ludo Beckers wrote:
It clearly shows I hadn't a clue what I was doing when trying to set up
the
network.
Is there something I should retry with the CD first, or otherwise can
someone send me the link for the right documentation (Network for
Dummies?)
ple
On Tue, 01 Apr 2014 20:03:05 +0200, Predrag Punosevac
wrote:
[root@lera proc]# lspci -nn|grep RAID
09:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID
SAS 2208 [Thunderbolt] [1000:005b] (rev 03)
So PCI ID is 1000:005b if I am not mistaken.
Yes, and it looks like our mfi
On Mon, 31 Mar 2014 19:35:59 +0200, Predrag Punosevac
wrote:
The server is currently configured as RAID 6 and LSI Logic / Symbios
Logic MegaRAID SAS 2208. Does anyone have experience with DragonFly
using above RAID card? Obviously I would like to use Hammer. In
particular has anybody being a
On Tue, 01 Apr 2014 08:04:23 +0200, karu.pruun
wrote:
I tried to compile a kernel with bwi wireless driver support but it
failed.
Does anyone know what is the status of the bwi driver? Would it
support the Broadcom
bcm4322 chipset (the airport extreme on a macboopro)?
Our bwi(4) driver wa
On Fri, 28 Mar 2014 17:10:29 +0100, Ludo Beckers wrote:
I did see a feature 'take snapshot' so I did that.
I can't open the file (extension is .sav) with a text editor though, so
don't know if it's usefull. It's 61 MB large.
Nope, that takes a snapshot of your VM so you could later revert to
On Thu, 20 Feb 2014 18:42:32 +0100, Andrey Oktyabrskiy
wrote:
I updated my homeserver to master yesterday. Tons of these errors in
messages:
ACPI Error: Method parse/execution failed [\\_GPE._L03] (Node
0xffe005f089c0), AE_AML_MUTEX_ORDER (20140214/psparse-553)
ACPI Exception: AE_AML_M
On Fri, 21 Mar 2014 06:51:14 +0100, lhmwzy wrote:
Under 3.6.1,I build a customer kernel and disable usb.
When run "rcrun XXX",it says "XXX depends on usbd, current state:"
How to fix this?
Can you try this patch on your /etc/rc.d/usbd ->
http://leaf.dragonflybsd.org/~swildner/usbd_rc.diff
On Sun, 23 Mar 2014 12:09:30 +0100, Alex Hornung
wrote:
- Integrating it with installworld, so that there's always an initrd
image
It might be better suited for 'make upgrade'. Else all the tools that are
used to (re)construct it have to be bootstrap tools.
Sascha
On Sun, 23 Mar 2014 10:51:45 +0100, Francois Tigeot
wrote:
This rescue thing is the most problematic part, not because of some
technical challenges but due to general disagreement among developers.
Discussions in the IRC channel are going nowhere.
My perception was that there was a general
On Sat, 22 Mar 2014 15:12:35 +0100, lhmwzy wrote:
I used the following kernel config to build a customer kernel
[...]
As you can see,I removed all usb related things.
Yes, but even then, usb.ko would be loaded as a dependency of ehci.ko
which our loader autoloads by default. Or are you no
On Fri, 21 Mar 2014 06:51:14 +0100, lhmwzy wrote:
Under 3.6.1,I build a customer kernel and disable usb.
Can you be more specific about how you disabled it?
Regards,
Sascha
Hi,
please notice that after 917beb172f5c4ee492fa7b47ce8c161066b977e8 ("Now
that the base issue is fixed, enable -Wsign-compare again in scanners."),
you need to build world before rebuilding the kernel.
Another way to just update the kernel is to build it with -DNO_WERROR.
Regards,
Sascha
On Mon, 10 Mar 2014 09:29:08 +0100, Francois Tigeot
wrote:
Hi,
I took the opportunity of having access to a 20 cores / 40threads Xeon
system
to do some Postgres benchmarking.
The FreeBSD numbers certainly don't look right (as in, realistic). Are you
sure there is no configuration issu
On Mon, 10 Mar 2014 02:53:48 +0100, Sascha Wildner wrote:
Hi,
I have switched over our USB stack to USB4BSD and there are a few things
to note:
Also, note that you must do a full rebuild/install and upgrade cycle to
upgrade after this commit (f0478b8b4541546dc0fc6a0248e1a039b037f1ae
[Resending to users@ separately, seems to have just gone to kernel@]
Hi,
I have switched over our USB stack to USB4BSD and there are a few things
to note:
Regarding driver support, controllers (including XHCI), keyboard, mouse
and mass storage are working well enough, as are axe(4), rum(4)
Hi,
I have switched over our USB stack to USB4BSD and there are a few things
to note:
Regarding driver support, controllers (including XHCI), keyboard, mouse
and mass storage are working well enough, as are axe(4), rum(4), run(4)
and urtwn(4). I assume John will enable libusb dependent dp
On Wed, 19 Feb 2014 15:38:16 +0100, Joel Nilsson wrote:
Hi.
I have decided to ditch vinum and go for HW RAID to create a RAID10
pool. Areca seem to be the best vendor at the moment and I have been
looking on the ARC-1214-4i, but DragonFly lacks support for the 12x4
series (according to t
On Tue, 25 Feb 2014 08:07:36 +0100, lhmwzy wrote:
It has serveral times run into no responese problem.
the console messages are:
cache_lock blocked on 0xffe085065430 8001 "blocklist.RSA-2048"
swap_pager: indefinite wait buffer: offset: 416837632,size:4096
swap_pager: indefinite wait buf
On Wed, 19 Feb 2014 15:38:16 +0100, Joel Nilsson wrote:
Hi.
I have decided to ditch vinum and go for HW RAID to create a RAID10
pool. Areca seem to be the best vendor at the moment and I have been
looking on the ARC-1214-4i, but DragonFly lacks support for the 12x4
series (according to t
On Fri, 21 Feb 2014 13:42:31 +0100, Andrey Oktyabrskiy
wrote:
On Feb 21 2014, Sascha Wildner wrote:
1) Retry with "hw.acpi.auto_serialize_methods=0" in /boot/loader.conf
It helps, thank you. Errors gone. Where I can read about this tunable?
It's a new feature of ACPICA
On Thu, 20 Feb 2014 18:42:32 +0100, Andrey Oktyabrskiy
wrote:
Good day.
I updated my homeserver to master yesterday. Tons of these errors in
messages:
ACPI Error: Method parse/execution failed [\\_GPE._L03] (Node
0xffe005f089c0), AE_AML_MUTEX_ORDER (20140214/psparse-553)
ACPI Excepti
On Thu, 20 Feb 2014 13:03:49 +0100, Joel Nilsson wrote:
Thanks. :)
The arc(4) driver in OpenBSD-current seems to be up to date; does it
also has the style issue or is it perhaps not as compatible with
DragonFly?
I only took a brief look at OpenBSD's driver so far, to see how we could
e
I will look at it. I had it on my list for a time, but it always gives me
headaches to look at the driver code (which has serious style related
issues). :)
Give me 2-3 days.
Sascha
On Wed, 19 Feb 2014 15:38:16 +0100, Joel Nilsson wrote:
RAID
On Fri, 14 Feb 2014 10:03:40 +0100, John Marino
wrote:
Problem 2: The bugs.dragonflybsd.org is not properly monitored. "Real"
bug PR gets opened and nobody responds to them, probably because they
don't even know about them. Redmine simply isn't in the forefront
It is your assumption (and
On Tue, 04 Feb 2014 22:39:30 +0100, Pierre Abbat
wrote:
Could someone take a look at this? Zyxomma crashed when it was four
hours away
from me, and I don't know what caused it, except that it was probably
caused
by passing packets. It wasn't doing anything else, except occasional cron
job
Hi everybody,
I've upgraded ACPI in master on Monday.
If you are seeing ACPI related error messages on the console or notice any
other weird issues that might be related, please make sure that your box
has the latest BIOS. It could be that a BIOS upgrade fixes the problems.
Of course, feel
On Mon, 20 Jan 2014 16:23:54 +0100, Dongsheng Song
wrote:
After I add 'options SCTP' to X86_64_GENERIC on DFBSD
'X86_64_GENERIC', I start a simple SCTP client, then kernel panic:
Our SCTP code is ancient from, say, 2004 or 2005 (what FreeBSD had back
then) and has never been taken
On Sun, 19 Jan 2014 07:02:13 +0100, Pierre Abbat
wrote:
Darner's periodic output has been coming around 5:00 EST instead of
shortly
after midnight, which is 5:00 UTC. Here's a listing of the snapshot
directory
(minus the symlink arrows, which make it wider than the screen):
Pierre,
the
On Wed, 15 Jan 2014 06:16:02 +0100, Pierre Abbat
wrote:
Is there a way to keep it from asking for options when building from
source?
In some of the packages I've built so far, it stopped repeatedly to ask
for
options.
Pass -DBATCH to the make
Sascha
On Mon, 02 Dec 2013 00:35:28 +0100, Pierre Abbat wrote:
I just rebooted the new kernel and got this:
# kldload if_iwn
kldload: can't load if_iwn: Exec format error
The console or dmesg will show what the real error is when this one
occurs. Can you check?
S.
On Thu, 14 Nov 2013 20:04:32 +0100, Francois Tigeot
wrote:
Supermicro sells server-class hardware and the other brands mostly small
SOHO boxes.
Completely different performance and reliability target markets.
It should be noted that we have reports of their IPMI being broken and
useless.
On Wed, 13 Nov 2013 19:09:48 +0100, Lanir W. wrote:Hi,I've been attempting to use an Intel Centrino Advanced-N 6235 on a DragonFlyBSD box. I tried under 3.4 and 3.6 but I don't seem able to bring up the interface. I tried module loading as you can see in the dmesg below but that appears unnecessa
On Mon, 28 Oct 2013 17:05:50 +0100, Francois Tigeot
wrote:
Hi,
As far as I know, cups has been the only way to print on modern printers
for years now.
The lpr binary from the base system also conflicts with lpr from the cups
package.
Is someone still using the base /usr/bin/lpr and related
On Thu, 24 Oct 2013 06:49:37 +0200, Rama wrote:
I have a ZTE Corporation K3800 3G USB Modem which I use on linux for
internet. I'm not sure what to do to connect to this modem?
Aside from what I said in my other reply, can you try ugensa with that
adapter?
$ kldload ugensa
Sascha
On Thu, 24 Oct 2013 06:49:37 +0200, Rama wrote:
Hi,
I booted DragonflyBSD (the latest IA32 usb bootable image), but I'm
having trouble connecting to the world wide web.
I have a ZTE Corporation K3800 3G USB Modem which I use on linux for
internet. I'm not sure what to do to connect to this mo
On Sun, 25 Aug 2013 18:44:18 +0200, Dongsheng Song
wrote:
[...]
During the IO test, 'dev_active' changed to about 100.
Then IO speed got much improve, I got 49.0 MB/s with direct IO.
FreeBSD 9.1 give me 50.5 MB/s with direct IO.
This test confirmed command queue can improve IO performance
d
On Sat, 24 Aug 2013 09:45:02 +0200, Dongsheng Song
wrote:
On Sat, Aug 24, 2013 at 11:52 AM, Sascha Wildner wrote:
[...]
Could you try with this patch please?
http://leaf.dragonflybsd.org/~swildner/cam_probe.diff
Sascha
No IO speed difference (still 0.200 ~ 0.400 MB/s with direct IO
On Mon, 19 Aug 2013 09:55:12 +0200, Dongsheng Song
wrote:
Hi,
When I running DragonFlyBSD under VMware ESXi 5.1, with the following
setting:
CPUs: 8
Memory: 4096 MB
SCSI controller: LSI Logic Paraller
SCSI disk size: 64G
I found this VM is very very slowly, then I check the dmesg output
On Thu, 22 Aug 2013 18:08:56 +0200, Dongsheng Song
wrote:
So merge mpt (LSI Logic) driver from FreeBSD is valuable, but
unfortunately, I no suck skill.
Also, can you paste a _verbose_ dmesg? For verbose boot, select 'v' at the
loader menu.
Sascha
On Thu, 22 Aug 2013 18:08:56 +0200, Dongsheng Song
wrote:
So merge mpt (LSI Logic) driver from FreeBSD is valuable, but
unfortunately, I no suck skill.
It was last synced with FreeBSD HEAD in April last year:
http://lists.dragonflybsd.org/pipermail/commits/2012-April/160732.html
I did a d
On Mon, 19 Aug 2013 09:55:12 +0200, Dongsheng Song
wrote:
Hi,
When I running DragonFlyBSD under VMware ESXi 5.1, with the following
setting:
CPUs: 8
Memory: 4096 MB
SCSI controller: LSI Logic Paraller
SCSI disk size: 64G
I found this VM is very very slowly, then I check the dmesg output
On Thu, 08 Aug 2013 19:34:13 +0200, Vitaly Shevtsov wrote:Hello!Could someone tell me if uplcom/ucom is ported to USB4BSD or not? Just want to know whether to recompile kernel :)
The current state is that (if I remember correctly) all drivers below /usr/src/sys/bus/u4b/serial/ are ported (as in,
Hello everyone,
it looks like the recent libc version bump (from 7 to 8) causes issues
with quickworld.
So if you are going to upgrade your system to after
2a65303dc935e67ce5f4a93105d42df9774b2b70 (commit from June 2), please do
it with a full rebuild.
Regards,
Sascha
On Wed, 29 May 2013 02:03:18 +0200, Gavin Reade wrote:Hi All,Finally got X working on 3.4, it was a bit of a pain (mainly because I did not know what to do straight away). i started using dports straight away, and did xorg -configure and used that config but x would not start. My card is a Radeo
On Thu, 25 Apr 2013 22:37:49 +0200, william opensource4you
wrote:
All,
I'm playing with DF-3.3 with Dprots, but have some difficulties with
hotplugd :-(.
In fact, hotplugd crash quite rapidely with the following message:
"hotplugd[28024]: read: Interrupted system call".
I did a quick test
On Tue, 23 Apr 2013 08:57:38 +0200, william opensource4you
wrote:
I'm trying to have amd (automounter) running on my DF system to mount
nfs folders served by freenas.
If you are willing to test an upgrade, please try:
http://leaf.dragonflybsd.org/~swildner/0001-WIP-amd-upgrade.patch
It's
On Tue, 02 Apr 2013 12:57:55 +0200, Filippo Moretti wrote:Now I get this one:linking kernel no debuglwkt_token.o In Function 'db_tok_all'lwkt_token.c (text+0x9e) undefined reference to 'db_printf'
Fixed that one too. Anything else?Sascha
On Mon, 01 Apr 2013 22:47:50 +0200, Filippo Moretti wrote:I have tried to make buildkernel and I got the following error.This is with today update of /usr/srcsincerelyFilippo Fix pushed, please pull and retry. Sascha
On Thu, 21 Feb 2013 23:22:55 +0100, Roger Lawhorn
wrote:
I am using vmware player 5. 64bit will not install right.
What issues were there?
Sascha
Hi all,
I've updated the data files in /usr/share/locale and /usr/share/i18n to
latest {Free,Net}BSD (the commit is 45a9a2ebaf).
If you are using non-default locale settings, please watch out for any
issues in this area, localized time, currency, number, etc.
representation, wrong sorting
Actually this is a known bug in gcc. On FreeBSD and DragonFly on i386,
the warning about this is FALSE due to nuances in the 53-bit mantissa
rounding.
It didn't warn with 4.7 on FreeBSD/i386 when we tested it.
The test program was something like:
#include
long double foo = LDBL_MAX;
int m
On Sun, 23 Dec 2012 20:33:30 +0100, s...@bestmx.ru wrote:
Hello.
I have a laptop "Acer 5635"
And DFLY-i386-3.2.1
and it refuses to boot.
here is the screenshot
http://i.imm.io/QcCg.jpeg
Unfortunately i did not manage to obtain a crash dump
call dumpsys
says "0" whithout a delay and nothing
On Fri, 21 Dec 2012 11:43:23 +0100, Andrey N. Oktyabrski
wrote:
I get a kernel compilation error on fresh (master) sources:
Have you also built world with "WANT_USB4BSD=yes" in /etc/make.conf before?
Sascha
Hi,
if you are compiling master with commit 7adb15b6 or later, I'd like to
advise that you do a full buildworld/kernel (at least the kernel) that
time. I did have booting issues with the commit at one point and my theory
is that it was because I used quick*. So if you want to be safe, pleas
On Wed, 12 Dec 2012 14:20:20 +0100, s...@bestmx.ru wrote:
Hello,
I made several attempts to create Live-USB DFLY installation
and failed.
particularly,
I can not figure out how to use the distribution-image properly.
i have
dfly-x86_64-gui-3.2.1_REL.img.bz2
unbzipped
dfly-x86_64-gui-3.2.1_REL.
1 - 100 of 115 matches
Mail list logo