Re: dlr-mask not on the url

On Mon, 2011-12-19 at 18:26, Jorge Raimundo wrote: > Hi all! > > I'm reading the Userguide Chapter 10 that talks about SMS Delivery reports. > > In a given paragraph I find this: > "*If you specify *dlr-mask *on the URL you pass on to Kannel you also need > to specify *dlr-url*.*" > > If I under

dlr-mask not on the url

Hi all! I'm reading the Userguide Chapter 10 that talks about SMS Delivery reports. In a given paragraph I find this: "*If you specify *dlr-mask *on the URL you pass on to Kannel you also need to specify *dlr-url*.*" If I understood correctly, there is the possibility to specify the *dlr-mask *

Re: Siemens Modem Pool dev/usb?

You have to try to connect to each one separately. It can be on the same config file but each dev should have its own config. You can use the same or different smsc-ids. Kannel will only connect to the defined devs. In some usb modems one dev gives you access to the AT command and the other not or

Re: Can't send sms - FAILED Send SMS

Thank you for your replies! In fact I had an unnoticed error message in the smsc log: *ERROR: SMPP[ROUTO]: SMSC returned error code 0x000b (Invalid Destination Address) in response to submit_sm.* Changing the url from: http://192.168.0.6:13013/cgi-bin/sendsms?username=tester&password=foobar&t

Re: Can't send sms - FAILED Send SMS

Check following: - Does your operator allow alphanumeric masking for your LA? - Are your TON/NPI settings matching the ones given by the operator? Is 00351xx the right format for recipient numbers? Try sending to 351xx (00 is attached by SMSC itself, depending upon TON/NPI settings). Rega

Can't send sms - FAILED Send SMS

Hi all. I'm trying to send sms but it fails and I can't figure out why. Via web I go to http://192.168.0.6:13013/cgi-bin/sendsms?username=tester&password=foobar&to=003519**67&text=Hello&from=MV On the smsbox I get: *INFO: smsbox: Got HTTP request from <192.168.0.134> INFO: sendsms used by

Re: Message Queued - 0: Accepted for delivery

Check the smsc log (in your case */var/log/kannel/smsc.log*). On Mon, Dec 19, 2011 at 6:16 AM, Modus - WAP/SMS-Gateway < s...@quito.oksigeno.com> wrote: > ** > > I have this problem: > > When I send a message I got 0: Accepted for delivery but the message still > Queued. > > Any sugestion? > > Be