Re: Kannel multiboxing.

2 servers with one database to load balance the sending >> of SMS? >> >> -- >> Tervitades/Best Wishes, >> Gert Tamm >> Süsteemiadministraator/System administrator >> E-mail: g...@messenger.ee >> Direct Messenger OÜ >> >> >> >>

Re: Kannel multiboxing.

; > > > Disclaimer: one.Vip DOOEL Skopje > This e-mail (including any attachments) is confidential and may be > protected by legal privilege. If you are not the intended recipient, you > should not copy it, re-transmit it, use it or disclose its conte

RE: Kannel multiboxing.

...@messenger.ee Direct Messenger OÜ Disclaimer: one.Vip DOOEL Skopje This e-mail (including any attachments) is confidential and may be protected by legal privilege. If you are not the intended recipient, you should not copy it, re-transmit it, use

Re: [PATCH] allow setting service-type for SMPP SMSC

this hasn't worked I did but same error On Mon, Nov 12, 2018 at 9:02 PM Web Min wrote: > try to match the below > > # SMSC > group = smsc > smsc = smpp > smsc-id = myid > allowed-smsc-id = myid > preferred-smsc-id = myid > interface-version = 34 > host = xx.xx.xx.xx. > port = >

Re: [PATCH] allow setting service-type for SMPP SMSC

try to match the below # SMSC group = smsc smsc = smpp smsc-id = myid allowed-smsc-id = myid preferred-smsc-id = myid interface-version = 34 host = xx.xx.xx.xx. port = receive-port = 0 transceiver-mode = 0 smsc-username = user smsc-password = pass system-type = VMA source-addr-ton = 5

Re: [PATCH] allow setting service-type for SMPP SMSC

Below are variables and operator says the are ok; just the variable for service-type which is not parsing the correct variable group = smsc smsc = smpp smsc-id = zoned host = 172.xx.xx.xxx port = 5001 interface-version = 34 smsc-username = xx smsc-password = xx system-type = "smpp"

Re: [PATCH] allow setting service-type for SMPP SMSC

what is your smsc variables? in kannel.conf On Mon, Nov 12, 2018 at 9:13 PM christopher kamutumwa < chriskamutu...@gmail.com> wrote: > hello, > where can I find this patch I have noticed when service-type= smpp is put > in config log shows NOBAL instead of smpp. hence getting error INVALID >

Re: INVALID SERVICE-TYPE KANNEL

try the below smsc settings copy /paste from my kannel server adjust it as you see fit # SMSC group = smsc smsc = smpp smsc-id = myid allowed-smsc-id = myid preferred-smsc-id = myid interface-version = 34 host = xx.xx.xx.xx. port = receive-port = 0 transceiver-mode = 0 smsc-username = user

Re: INVALID SERVICE-TYPE KANNEL

*smsc-id = zoned --> Issue is Here??* 2018-11-09 14:00:20 Receive DLR *[SMSC:airtel]* [SVC:] [ACT:] [BINF:] [FID:] [META:?smpp_resp?] [from:] [to:260976298808] [flags:-1:-1:-1:-1:16] [msg:36:NACK/0x0015/Invalid Service Type] [udh:0:] According to those above 2 things, I can say you used

Re: INVALID SERVICE-TYPE KANNEL

hasn't worked boss On Fri, Nov 9, 2018 at 2:54 PM Bendon Murgor wrote: > Hi Chris, > > Change system type as below and advise. > *system-type = DEFAULT* > > > > Best Regards, > *Bendon Murgor *: Systems Engineer/IT Systems Auditor. > *Phone*: Kenya: +254-720529868 > Twitter: @bendonmurgor

Re: INVALID SERVICE-TYPE KANNEL

Hi Chris, Change system type as below and advise. *system-type = DEFAULT* Best Regards, *Bendon Murgor *: Systems Engineer/IT Systems Auditor. *Phone*: Kenya: +254-720529868 Twitter: @bendonmurgor On Fri, Nov 9, 2018 at 3:36 PM christopher kamutumwa <

Re: INVALID SERVICE-TYPE KANNEL

Please ask your telco support to provide recommended configuration especially for dlr thing. Thanks. Pada tanggal Jum, 9 Nov 2018 19.36 christopher kamutumwa < chriskamutu...@gmail.com menulis: > Hello, > I have an issue I have configured kannel and am able to bind to SMSC > provider. Not

RE: TLS 1.2 support in kannel

: info.ubichip Cc : Web Min; users Objet : Re: TLS 1.2 support in kannel Hi, please check userguide: https://kannel.org/download/kannel-userguide-snapshot/userguide.html#AEN482 Special: ssl-client-certkey-file (c) filename A PEM encoded SSL certificate and private key file to be used with SSL

Re: TLS 1.2 support in kannel

18 17:14 > À : 'Web Min' > Cc : users@kannel.org <mailto:users@kannel.org> > Objet : RE: TLS 1.2 support in kannel > > the email was gone too fast : > > do you have any experience with the following added feature of the 1.4.5 > specially the one in red (le last one) ? >

RE: TLS 1.2 support in kannel

novembre 2018 17:14 À : 'Web Min' Cc : users@kannel.org Objet : RE: TLS 1.2 support in kannel the email was gone too fast : do you have any experience with the following added feature of the 1.4.5 specially the one in red (le last one) ? * Added OpenSSL 1.1.x support. * Added support

Re: TLS 1.2 support in kannel

oyé :* samedi 3 novembre 2018 17:12 > *À :* 'Web Min' > *Cc :* 'users@kannel.org' > *Objet :* RE: TLS 1.2 support in kannel > > > > thanks, > > > > it working with > > ./configure --enable-start-stop-daemon --with-mysql --enable-ssl > > > > but not wi

RE: TLS 1.2 support in kannel

suites to use. De : info.ubichip [mailto:info.ubic...@free.fr] Envoyé : samedi 3 novembre 2018 17:12 À : 'Web Min' Cc : 'users@kannel.org' Objet : RE: TLS 1.2 support in kannel thanks, it working with ./configure --enable-start-stop-daemon --with-mysql --enable-ssl

RE: TLS 1.2 support in kannel

at yes Do you ha De : Web Min [mailto:meweb...@gmail.com] Envoyé : samedi 3 novembre 2018 09:05 À : info.ubic...@free.fr Cc : users@kannel.org Objet : Re: TLS 1.2 support in kannel Hello, In order to start with Ubuntu make sure the following packages are installed: apt-get

Re: TLS 1.2 support in kannel

libs and/or directories at yes > > Does anyone got this error ? > > thanks in advance > > > -Message d'origine- > De : users [mailto:users-boun...@kannel.org] De la part de info.ubichip > Envoyé : vendredi 2 novembre 2018 16:41 > À : users@kannel.org > Objet : RE:

RE: TLS 1.2 support in kannel

and/or directories at yes Does anyone got this error ? thanks in advance -Message d'origine- De : users [mailto:users-boun...@kannel.org] De la part de info.ubichip Envoyé : vendredi 2 novembre 2018 16:41 À : users@kannel.org Objet : RE: TLS 1.2 support in kannel Hello, some update, I forgot

RE: TLS 1.2 support in kannel

Hello, some update, I forgot to mention, I'm using kannel 1.4.5, and it has been seen the following errors as well in smsbox log : :SSL routines:SSL23_GET_SERVER_HELLO:sslv3 alert handshake failure Does anyone have seen this issue so far ? thanks in advance for your help -Message

Re: Messages with more than 160 Characters

Hi Sure, you can use any programming language you know. Please always copy kannel list so any person can benefit from conversation and you might get help from more people. Regards, Alvaro

Re: Messages with more than 160 Characters

Can I do it using PHP? On Thu, Oct 25, 2018 at 8:37 PM Alvaro Cornejo wrote: > Hi Robin > > You should do it before sending the message to kannel. > > Test the message length and if it is more than 160 chars do the split as > per the links sent below and then send each part to kannel. If the

Re: Messages with more than 160 Characters

Hi Robin You should do it before sending the message to kannel. Test the message length and if it is more than 160 chars do the split as per the links sent below and then send each part to kannel. If the message is less than 160 chars, just proceed as usual. Regards, Alvaro

Re: Messages with more than 160 Characters

Hi You need to do it "manually" at your app level and before submit it to smsbox. check this links: https://help.nexmo.com/hc/en-us/articles/204015653-Sending-Concatenated-Messages-via-SMPP https://www.activexperts.com/sms-component/sms/multipart/ Regards, Alvaro

Re: Messages with more than 160 Characters

Hi All, Any Idea??? On Wed, Oct 24, 2018 at 12:14 AM Robin C wrote: > Hi, > How can I add udh headers and submitted to kannel as single part sms? > > On Tue, Oct 23, 2018 at 10:46 PM Vangelis Typaldos > wrote: > >> If the sms is splitted in an external app, so you add the proper udh >>

Re: Messages with more than 160 Characters

Hi, How can I add udh headers and submitted to kannel as single part sms? On Tue, Oct 23, 2018 at 10:46 PM Vangelis Typaldos wrote: > If the sms is splitted in an external app, so you add the proper udh > headers and submitted to kannel as single part sms and you request delivery > report for

Re: Messages with more than 160 Characters

If the sms is splitted in an external app, so you add the proper udh headers and submitted to kannel as single part sms and you request delivery report for each of them you will receive both dlrs. If you send to kannel the long sms via sendsms, kannel will perform the required splitting

RE: Setting source address SMPP

Thank you for the reply, I just found out that the parameter is global-sender to be configured in the ppg group. De: Cedar Jet [mailto:mecedar...@gmail.com] Enviado el: viernes, 19 de octubre de 2018 12:36 p. m. Para: raf...@hacom-tech.com CC: users@kannel.org Asunto: Re: Setting source

Re: Setting source address SMPP

rnes, 19 de octubre de 2018 12:09 p. m. > *Para:* raf...@hacom-tech.com > *CC:* users@kannel.org > *Asunto:* Re: Setting source address SMPP > > > > How you are sending the SMS to your phone? > > > > On Fri, Oct 19, 2018 at 8:07 PM Rafael Cerna > wrote: > >

RE: Setting source address SMPP

I am using WAP Push to send the SMS De: Cedar Jet [mailto:mecedar...@gmail.com] Enviado el: viernes, 19 de octubre de 2018 12:09 p. m. Para: raf...@hacom-tech.com CC: users@kannel.org Asunto: Re: Setting source address SMPP How you are sending the SMS to your phone? On Fri, Oct 19

Re: Setting source address SMPP

dest_addr_ton: 1 = 0x0001 > > 2018-10-18 17:22:01 [14779] [7] DEBUG: dest_addr_npi: 1 = 0x0001 > > I haven’t configured 1234 in Kannel so that is why I am confused > > > > Thanks for your answer > > > > > > *De:* Cedar Jet [mailto:mecedar...@gmail.com] > *

RE: Setting source address SMPP

to:mecedar...@gmail.com] Enviado el: viernes, 19 de octubre de 2018 12:01 p. m. Para: raf...@hacom-tech.com CC: users@kannel.org Asunto: Re: Setting source address SMPP what do you mean by source address? Is it Sender ID? On Fri, Oct 19, 2018 at 8:00 PM Rafael Cerna mailto:raf...@hacom-tech.co

Re: Setting source address SMPP

t [mailto:mecedar...@gmail.com] > *Enviado el:* viernes, 19 de octubre de 2018 11:25 a. m. > *Para:* raf...@hacom-tech.com > *CC:* users@kannel.org > *Asunto:* Re: Setting source address SMPP > > > > Yes, that is correct. After you configure your smsbox Send SMS via HTTP >

RE: Setting source address SMPP

One last question. In the smsbox configuration, which parameter would be the one to change so I can set source address 672? De: Cedar Jet [mailto:mecedar...@gmail.com] Enviado el: viernes, 19 de octubre de 2018 11:25 a. m. Para: raf...@hacom-tech.com CC: users@kannel.org Asunto: Re

Re: Setting source address SMPP

UG: dest_addr_npi: 1 = 0x0001 > > > > Thank you for the reply > > > > *De:* Cedar Jet [mailto:mecedar...@gmail.com] > *Enviado el:* viernes, 19 de octubre de 2018 11:07 a. m. > *Para:* raf...@hacom-tech.com > *CC:* users@kannel.org > *Asunto:* Re: Setting source

RE: Setting source address SMPP

0x0001 Thank you for the reply De: Cedar Jet [mailto:mecedar...@gmail.com] Enviado el: viernes, 19 de octubre de 2018 11:07 a. m. Para: raf...@hacom-tech.com CC: users@kannel.org Asunto: Re: Setting source address SMPP If you mean the source address by sender ID, that option will be

Re: Setting source address SMPP

If you mean the source address by sender ID, that option will be handle via the smsbox not from the SMSC by passing the sender Id and recipient with the message Below is my SMSC setup, you can match with yours group = smsc smsc = smpp smsc-id = my-id allowed-smsc-id = my-id preferred-smsc-id =

Re: Kannel Service not starting automatically

Thank you, I will do that. On Thu, Oct 18, 2018 at 12:14 PM Willy Mularto wrote: > As I recommended previously, it's best for you to write your own version > of the script. Simple reason, the target dir and other related things > highly possible different with the .deb result. Search in the

Re: Kannel Service not starting automatically

As I recommended previously, it's best for you to write your own version of the script. Simple reason, the target dir and other related things highly possible different with the .deb result. Search in the archives and you will find some examples. Thanks. So Far Express VPN still the fastest

Re: Kannel Service not starting automatically

Thanks for the tip! Should I install via .deb in order to start automatically? regardless the flag during the compilation ./configure --disable-docs --enable-start-stop-daemon --with-mysql --with-mysql-dir=/var/lib/mysql Anyway I will do something similar to the this link

Re: Kannel Service not starting automatically

AFAIK you did the installation twice. First you use .deb and the second time you use source. I believe the start script belong to .deb. My suggestion is to check and modify some lines in the script to point to your installation dir. And make sure it has sufficient privilege. And for the best

RE: Kannel compilation error

Thanks for the answer. It was this option. When I disabled it the problem was solved. De: Willy Mularto [mailto:sangpr...@gmail.com] Enviado el: martes, 16 de octubre de 2018 6:13 p. m. Para: Cedar Jet CC: raf...@hacom-tech.com; users@kannel.org Asunto: Re: Kannel compilation error

Re: Kannel compilation error

on to skip this part during >>> the installation? >>> >>> >>> >>> *De:* Cedar Jet [mailto:mecedar...@gmail.com] >>> *Enviado el:* lunes, 15 de octubre de 2018 10:26 a. m. >>> *Para:* raf...@hacom-tech.com >>> *CC:* users@kann

Re: Kannel compilation error

n? >> >> >> >> *De:* Cedar Jet [mailto:mecedar...@gmail.com] >> *Enviado el:* lunes, 15 de octubre de 2018 10:26 a. m. >> *Para:* raf...@hacom-tech.com >> *CC:* users@kannel.org >> *Asunto:* Re: Kannel compilation error >> >> >> &g

Re: sqlbox looking for mssql connection although mysql installed

>>>>>>>> + automake --version >>>>>>>>>> + automake+ sed -e 1s/[^0-9]*// -e q >>>>>>>>>> --version >>>>>>>>>> + amvers=1.15.1 >>>>>>>>>> + expr 1.15.1

Re: sqlbox looking for mssql connection although mysql installed

ersion >>>>>>>>> + amvers=1.15.1 >>>>>>>>> + expr 1.15.1 < 1.5 >>>>>>>>> + amvers=no >>>>>>>>> + test no = no >>>>>>>>> + set +x >>>>>>>>>

Re: Kannel compilation error

et [mailto:mecedar...@gmail.com] > *Enviado el:* lunes, 15 de octubre de 2018 10:26 a. m. > *Para:* raf...@hacom-tech.com > *CC:* users@kannel.org > *Asunto:* Re: Kannel compilation error > > > > from the log it smees need internet access to be able to continue > > > >

RE: Kannel compilation error

Thanks for the reply. Would there be an option to skip this part during the installation? De: Cedar Jet [mailto:mecedar...@gmail.com] Enviado el: lunes, 15 de octubre de 2018 10:26 a. m. Para: raf...@hacom-tech.com CC: users@kannel.org Asunto: Re: Kannel compilation error from the log

Re: Kannel compilation error

from the log it smees need internet access to be able to continue could not resolve host "www.oasis-open.org" (try again later) Regards On Mon, Oct 15, 2018 at 6:14 PM Rafael Cerna wrote: > Hello, > > > > During the make command of the installation process (v 1.4.5) , I see the > following

Re: sqlbox looking for mssql connection although mysql installed

automake/automake-1.15.1.tar.gz then >>>>>>>> >>>>>>>> ./configure >>>>>>>> ./make && ./make install >>>>>>>> >>>>>>>> now getting >>>>>>>&

Re: sqlbox looking for mssql connection although mysql installed

gt;>>> ./make && ./make install >>>>>>> >>>>>>> now getting >>>>>>> >>>>>>> + set -e >>>>>>> + amvers=no >>>>>>> + automake-1.15 --version >>>>>&g

Re: sqlbox looking for mssql connection although mysql installed

> + test -1.15 = no >>>>>> + libtoolize=no >>>>>> + glibtoolize --version >>>>>> + libtoolize --version >>>>>> + libtoolize=libtoolize >>>>>> + test libtoolize = no >>>>>> + set +x >>>&

Re: sqlbox looking for mssql connection although mysql installed

;>>> + libtoolize=libtoolize >>>>> + test libtoolize = no >>>>> + set +x >>>>> + test ! -d autotools >>>>> + libtoolize --copy --force >>>>> libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'autotools'. >

Re: sqlbox looking for mssql connection although mysql installed

' >>>> libtoolize: You should add the contents of the following files to >>>> 'aclocal.m4': >>>> libtoolize: '/usr/share/aclocal/libtool.m4' >>>> libtoolize: '/usr/share/aclocal/ltoptions.m4' >>>> libtoolize: '/usr/share/aclocal/ltsugar.m4'

Re: sqlbox looking for mssql connection although mysql installed

'/usr/share/aclocal/libtool.m4' >>> libtoolize: '/usr/share/aclocal/ltoptions.m4' >>> libtoolize: '/usr/share/aclocal/ltsugar.m4' >>> libtoolize: '/usr/share/aclocal/ltversion.m4' >>> libtoolize: '/usr/share/aclocal/lt~obsolete.m4' >>> libtoolize: Con

Re: sqlbox looking for mssql connection although mysql installed

adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, >> libtoolize: and rerunning libtoolize and aclocal. >> libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. >> + test -f ltmain.sh >> + aclocal-1.15 -I autotools >> + autoconf >> configure.ac:99

Re: sqlbox looking for mssql connection although mysql installed

.15 -I autotools > + autoconf > configure.ac:99: error: possibly undefined macro: AC_PROG_LIBTOOL > If this token and others are legitimate, please use m4_pattern_allow. > See the Autoconf documentation. > > so I'm not able to run the bootstrap to re-compi

Re: sqlbox looking for mssql connection although mysql installed

I autotools + autoconf configure.ac:99: error: possibly undefined macro: AC_PROG_LIBTOOL If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. so I'm not able to run the bootstrap to re-compiling with mysql Regards On Mon, Oct 15, 2018 at 7:

Re: sqlbox looking for mssql connection although mysql installed

What version do you use? Also how do you initiate the SQLBox? Thanks. So Far Express VPN still the fastest https://www.expressrefer.com/refer-friend?referrer_id=15939000_campaign=referrals_medium=copy_link_source=referral_dashboard On Mon, Oct 15, 2018 at 10:38 AM Cedar Jet wrote: > I tried

Re: sqlbox looking for mssql connection although mysql installed

I tried what Willy Suggest with the same result. I saw some posts saying that we should compile sqlbox with mysql, for that reason I'm running now on server that containing apache2, phpmyadmin php5.6 and mysql on Ubuntu 16.4 only. I had followed the below link

Re: sqlbox looking for mssql connection although mysql installed

Try to put the database connection before the sqlbox group. Thanks Pada tanggal Sen, 15 Okt 2018 02.10, Cedar Jet menulis: > Sure, and you can find the configuration below > > group = sqlbox > id = sqlbox-db > smsbox-id = sqlbox > #global-sender = "" > bearerbox-host = localhost >

Re: sqlbox looking for mssql connection although mysql installed

Sure, and you can find the configuration below group = sqlbox id = sqlbox-db smsbox-id = sqlbox #global-sender = "" bearerbox-host = localhost bearerbox-port = 18001 smsbox-port = 18005 smsbox-port-ssl = false sql-log-table = sent_sms sql-insert-table = send_sms log-level = 0 log-file =

Re: sqlbox looking for mssql connection although mysql installed

Sure, and sorry for the late reply you can find the configuration below group = sqlbox id = sqlbox-db smsbox-id = sqlbox #global-sender = "" bearerbox-host = localhost bearerbox-port = 18001 smsbox-port = 18005 smsbox-port-ssl = false sql-log-table = sent_sms sql-insert-table = send_sms log-level

Re: sqlbox looking for mssql connection although mysql installed

Share your SQLBox configuration file. Thanks So Far Express VPN still the fastest https://www.expressrefer.com/refer-friend?referrer_id=15939000_campaign=referrals_medium=copy_link_source=referral_dashboard On Sun, Oct 14, 2018 at 12:35 AM Cedar Jet wrote: > Hello, > > I'm always getting the

Re: SET data_coding as 1 in submit_sm

alt-charset is the option in smsc group for default charset section for smpp connection. for detailed info can go through User's Guide NOTE: If possible upgrade to 1.4.5 for easy configuration. On Thu, Sep 27, 2018

Re: Routing Traffic from One SMSC to another

This may work out for me currently. But my SMS are already in kannel store, Even though SMS in kannel store file Is this routing is going to work out. Also I will try to play with allowed-smsc and preferred-smsc to see how routing is working. Currently, we are sending smsc parameter always to

Re: Fwd: Routing Traffic from One SMSC to another

sqlbox we are not using, we connected smsbox directly to bearerbox. Also my sms are in kannel store already, so i think sqlbox also will show all as sent only. Hence it will not allow me to change I think. anyway I will try this option, to see what else issue i am facing. On Wed, Aug 22, 2018 at

Re: Routing Traffic from One SMSC to another

Hi, you have two options: 1. Load balance SMSC1 and SMSC2. See allowed-smsc config option and name your SMSCs equal. 2. Fallback to SMSC2 if SMSC1 is down or full. See preferred-smsc config option. Thanks, Alexander > Am 22.08.2018 um 06:59 schrieb Rajesh Sahoo : > > Hello all, > I am

Re: Commercial pricing of Kannel-smppbox

Dear, have you checked my mail i send from my official mail for same ?? thanks On Fri, Jul 6, 2018 at 4:38 AM, Stipe Tolj wrote: > Am 30.06.18 13:03, schrieb Web Services: > >> hi, >> >> can anyone suggest pricing for Commercial Kannel SMPP v3.4 server >> (smppbox) as i seen its paid kannel

RE: For Kannel for DLR Every Part

To be honest, I think this is just a Kannel quirk. == Rene Van: users Namens Willy Mularto Verzonden: zondag 5 augustus 2018 02:30 Aan: coinhost...@gmail.com CC: users@kannel.org Onderwerp: Re: For Kannel for DLR Every Part I think long SMS is actually a wrapped one and telco

Re: For Kannel for DLR Every Part

I think long SMS is actually a wrapped one and telco will also wrap the DLR and treat it as 1 transaction. So Far Express VPN still the fastest https://www.expressrefer.com/refer-friend?referrer_id=15939000_campaign=referrals_medium=copy_link_source=referral_dashboard On Sun, Aug 5, 2018 at

Re: ERROR: SMPP[xxxx]: got DLR but could not find message or was not interested in it

Thank you all. It worked with the DLR Storage in same database. - Mahesh On Sat, Aug 4, 2018 at 12:56 PM, Денис Давыдов wrote: > Manesh, > > See msg-id-type in the User Guide. Also I suggest you to enable debug mode > to smsc group (log_level=0) to see how your provider work with a message ID

Re: ERROR: SMPP[xxxx]: got DLR but could not find message or was not interested in it

Manesh, See msg-id-type in the User Guide. Also I suggest you to enable debug mode to smsc group (log_level=0) to see how your provider work with a message ID numbers. -- Regards, Denis пт, 3 авг. 2018 г. в 9:38, mahesh Lavanam : > Hi, > > Please help me in resolving the DLR issue > > I have a

Re: ERROR: SMPP[xxxx]: got DLR but could not find message or was not interested in it

use database with same DLR table, each kannel database has its own timestamp table store, so it is normal respond when DLR received in another kannel box... On Friday, 3 August 2018, 5:13:55 PM GMT+7, mahesh Lavanam wrote: But, this error I'm seeing at kannel.log file. I think as it

Re: ERROR: SMPP[xxxx]: got DLR but could not find message or was not interested in it

But, this error I'm seeing at kannel.log file. I think as it is not identifying it, it does not store into database. Thanks, Mahesh On Fri, Aug 3, 2018 at 2:12 PM, wrote: > Hi, > > do both Kannel share the same database and table ? they have to share DLR > database. > > Alex > > > Am

Re: ERROR: SMPP[xxxx]: got DLR but could not find message or was not interested in it

Hi, do both Kannel share the same database and table ? they have to share DLR database. Alex > Am 03.08.2018 um 08:37 schrieb mahesh Lavanam : > > Hi, > > Please help me in resolving the DLR issue > > I have a SMS Port with 2 TX & 2 RX sessions enabled. > > I have configured these

Re: Keeping relative time format w/o conversion to absolute time format

Hi Denis, sorry but it make no sense to me. If Kannel send absolute time format than SMSC can do whatever it want with it, recalculate to local time etc. Absolute time is not afffected if you are moving between TZs. Alex > Am 19.07.2018 um 15:25 schrieb Денис Давыдов : > > Alex, > >

Re: Keeping relative time format w/o conversion to absolute time format

Alex, Thanks for the answer. Firstly, the set of different validity_period is a requirement in our business workflow. Secondly, our ESMEs is geographically in different TZs and they are movable objects and we don't know ESME's location at the time of sending the message. In this case our SMPP

Re: Keeping relative time format w/o conversion to absolute time format

Hi, tha first question would be, why do you want to keep it in relative time format? As answer to your question: no this is not possible now , because Kannel converts timestamp to unix timestamp internally on the input side and afterwards to absolute time format. Sure you make changes to the

Re: Commercial pricing of Kannel-smppbox

Am 30.06.18 13:03, schrieb Web Services: hi, can anyone suggest pricing for Commercial Kannel SMPP v3.4 server (smppbox) as i seen its paid kannel add-on Hi, thanks a lot for your interest in the commercial add-on Kannel SMPP v5.0 server (smppbox) vSMSC solution. We're happy to provide

Re: [ANNOUNCE] Kannel 1.4.5 stable release available

Congratulation team! It's been more than 10 years with this incredible software and nothing to say but satisfied. So Far Express VPN still the fastest https://www.expressrefer.com/refer-friend?referrer_id=15939000_campaign=referrals_medium=copy_link_source=referral_dashboard On Wed, Jun 20,

Re: SMS command_status for long MT messages

Hi Jeff, it makes maybe sense for your case but not for all cases, therefore I don’t see a sense to invest time into it. Thanks, Alex > Am 02.06.2018 um 15:26 schrieb Jeff Thorn : > > Hi Alex, > Thanks for explaining, makes sense. > > The most common status we get is invalid destination

Re: SMS command_status for long MT messages

Hi Alex, Thanks for explaining, makes sense. The most common status we get is invalid destination address (0x000b). In this case all 3 parts in your example would have the same status. Would it make sense to include the status of it was the same for all parts? Jeff Thorn CEO Thorn

Re: SMS command_status for long MT messages

Hi, this is expected behaviour because we have to put all statuses into one DLR message. Just imagine if you have 3 parts and each of this part will be rejected with different error code, would you expect all 3 error codes in the status? Thanks, Alex > Am 30.05.2018 um 20:50 schrieb Jeff

Re: Incoming MO UDH

Hi, udh are identical except coding, the first one is hex encoded the second is binary url encoded. Thanks, Alex > Am 02.05.2018 um 03:33 schrieb Wan Md Arif Noor Bin. Wan Nizam > : > > Hi Kannel User, > > Based from the user guide using

Re: bootstrap.sh error

Hi, this is a list of packages I need to install to build kannel in docker container ubuntu 16.04: build-essential subversion ntp nano wget cvs subversion curl git-core unzip autoconf \ automake1.11 libtool flex debhelper pkg-config libpam0g-dev intltool checkinstall docbook

Re: bootstrap.sh error

Hi Alex, Thanks for the reply. I'm not sure it's available on Ubuntu 16.04, already searched it and found none for gettext-devel. Is there any other solution? So Far Express VPN still the fastest

Re: bootstrap.sh error

Hi, you have to install gettext-devel package. Thanks, Alex > Am 18.04.2018 um 06:56 schrieb Willy Mularto : > > Hi, > I receive this error during bootstrap.sh, any clue to solve? > > + export WANT_AUTOMAKE=1.8 > + which glibtoolize > + > + libtoolize --copy --automake

Re: bug? command_status field (%A) missing in DLR of split messages

Hi Kannel Users, I wanted to follow up on this issue I reported last week. Has anyone seen this before? I am having trouble getting the command_status field (%A) in my dlrs if the original MT message was a long sms message. Thanks, Jeff Jeff Thorn CEO / Principal Software Architect Thorn

RE: using kannel for sms/mms to and from computer to cell phone

gt; Cc: users@kannel.org Subject: Re: using kannel for sms/mms to and from computer to cell phone Thanks for the help Davor. Mighty Text uses the users cell phone to send and receive messages as far as I understand it. Are they also making their phone work as a modem on a linux box? Basically th

Re: using kannel for sms/mms to and from computer to cell phone

- > > Disclaimer: one.Vip DOOEL Skopje > This e-mail (including any attachments) is confidential and may be > protected by legal privilege. If you are not the intended recipient, you > should not copy it, re-transmit it, use it or disclose its contents, but

RE: using kannel for sms/mms to and from computer to cell phone

are not the intended recipient, you should not copy it, re-transmit it, use it or disclose its contents, but should return it to the sender immediately and delete your copy from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note

RE: Inverted Exclamation mark and question mark issue.

I force kannel to use GSM charset? Thanks for all the response so far, cheers, Arif Noor. From: Davor Spasoski <davor.spaso...@onevip.mk> Sent: Friday, April 06, 2018 7:02 PM To: Wan Md Arif Noor Bin. Wan Nizam <md.a...@forest-interactive.com> Cc: amal...@kannel.org; users@kannel.org S

Re: Pause Send Messages

8, 2018 6:23:22 PM To: Mohammed Al Mohsen Cc: kannel users@kannel.org Subject: Re: Pause Send Messages Hi Shut down smsc once you want stop sms and restart again once you want repush sms Thnx On Sun, Apr 8, 2018, 2:25 PM Mohammed Al Mohsen <mohmmed_sa...@hotmail.com<mailto:mohmmed_sa...@h

Re: Pause Send Messages

Hi Shut down smsc once you want stop sms and restart again once you want repush sms Thnx On Sun, Apr 8, 2018, 2:25 PM Mohammed Al Mohsen wrote: > Dear All, > > > How can pause send the messages from specific "smsc-id" at a > specific hour from "bearerbox"? > > >

Re: low success Rate Only 25k of 100k sms being sent ??

Hi how are you determining success rate? regards On Sat, Apr 7, 2018 at 11:13 PM, nashwan Al-Mawri wrote: > dear all > > I am using kannel to send sms to our subscribers through the telecom > company , the problem is i have 200,00 subscriber but the success rate >

Re: Inverted Exclamation mark and question mark issue.

Hi, you have to send in UTF-8 with coding=0 (for inverted exclamation mark: text=%C2%A1=0). If it doesn’t work please check your smpp debug logs and check if submit_sm has correct values in message body and if yes then SMSC doing something wrong. Thanks, Alex > Am 04.04.2018 um 07:27 schrieb

Re: Inverted Exclamation mark and question mark issue.

ding=2, but by using that it > halved the SMS length. Appreciate your help in this. > > Cheers, > Arif Noor > > From: Alexander Malysh <malys...@gmail.com> On Behalf Of amal...@kannel.org > Sent: Wednesday, April 04, 2018 4:40 PM > To: Wan Md Arif Noor

Re: Inverted Exclamation mark and question mark issue.

8-04-05 10:54:07 [16129] [7] DEBUG: SMPP PDU dump ends.   Kindly do let me know if there’s anything else that I can try, appreciate it.   Regards Arif Noor   From: Alexander Malysh <malys...@gmail.com> On Behalf Of amal...@kannel.org Sent: Wednesday, April 04, 2018 11:46 PM To: Wa

<    1   2   3   4   5   6   7   8   9   10   >