RE: using kannel for sms/mms to and from computer to cell phone

: using kannel for sms/mms to and from computer to cell phone Thanks for the help Davor. Mighty Text uses the users cell phone to send and receive messages as far as I understand it. Are they also making their phone work as a modem on a linux box? Basically the user can't send and re

Re: using kannel for sms/mms to and from computer to cell phone

Thanks for the help Davor. Mighty Text uses the users cell phone to send and receive messages as far as I understand it. Are they also making their phone work as a modem on a linux box? Basically the user can't send and receive messages without their cell phone on. The user installs the a

RE: using kannel for sms/mms to and from computer to cell phone

You can use kannel to send/receive SMS with your phone but first you have to make your phone work as a modem on a Linux box, then configure kannel to use that device (AT SMSC section). To send MMS, you will need something else in addition to kannel. Mbuni could be used for that, but I see no

using kannel for sms/mms to and from computer to cell phone

> Question. I'm trying to send and receive sms and mms messages to and from > my computer by going through my android phone. > > The phone would not be tethered to my computer. I know there are a few > apps out there like mighty text that will allow a person to do this but I &g

Re: R: Using my phone and Kannel to send SMS

RROR: 513 ERROR: AT2[/dev/ttyACM0]: +CME ERROR: Lower layer falure (SMS) (513) So, I am kind of stucked right now, I think it might be a problem related to my phone not being recognized properly, but I have no idea how to fix this. Looking forward to receiving some good hint, I paste my .co

Re: R: Using my phone and Kannel to send SMS

el config file. At this point, I receive some messages, however it stalls on ttyACM1<*1>: ATQ0 V1 E1 --. From the message I somehow noticed that the phone is probably under /dev/ttyACM1, so I changed my kannel conf file to point to that (the device variable is set to "/dev/ttyACM1&

Re: R: Using my phone and Kannel to send SMS

speed, and so on. > > > > BR > > > > *De :* users [mailto:users-boun...@kannel.org] *De la part de* > umbertofilippo > *Envoyé :* lundi 13 février 2017 22:46 > *À :* users@kannel.org > *Objet :* Re: R: Using my phone and Kannel to send SMS > > >

RE: R: Using my phone and Kannel to send SMS

BR De : users [mailto:users-boun...@kannel.org] De la part de umbertofilippo Envoyé : lundi 13 février 2017 22:46 À : users@kannel.org Objet : Re: R: Using my phone and Kannel to send SMS I finally managed to recognize which tty my phone is assigned (tty9). But now I ma having permission

Re: R: Using my phone and Kannel to send SMS

I finally managed to recognize which tty my phone is assigned (tty9). But now I ma having permission issues. I read from the user guide "In Ubuntu linux you just need to assign kannel user to group "dial"", but I don't know what that means... So I tried the discour

R: Using my phone and Kannel to send SMS

Forgot to say that I plugged my phone via USB cable and it was recognized properly by my system. I am on Ubuntu 16.04. - Messaggio originale - Da: "umbertofilippo" Inviato: ‎12/‎02/‎2017 20:03 A: "users@kannel.org" Oggetto: Using my phone and Kannel to send SMS Hi

Using my phone and Kannel to send SMS

Hi, I am trying to use my Nokia Lumia 625 to send SMS using Kannel. I followed the tutorial, and I am using the 'smskannel.conf' combined with the 'modems.conf' to get it work, but I need some help. I am encountering difficulties, since I don't know what is the actual value of the variable '

RE: Detect phone calls?

yes, if you log all the modem trafic, you will see 'AT+RING' De : users [mailto:users-boun...@kannel.org] De la part de Rene Kluwen Envoyé : mardi 31 janvier 2017 12:59 À : davidjesse...@aol.com; users@kannel.org Objet : Re: Detect phone calls? If you are using a gsm mo

Re: Detect phone calls?

If you are using a gsm modem, there might be something that you can detect in the log files. == Rene -- Origineel bericht -- Van: davidjesse...@aol.com Aan: users@kannel.org Verzonden: 30-1-2017 4:02:15 Onderwerp: Detect phone calls? Is it possible to detect when someone is calling

Re: Detect phone calls?

Hi There is an AT command that will make the modem eco the calling party to kannel log. Sorry didn't recall it now. Kannel does not have any feature that does what you want. So you need to work a little... - In order to see caller information you need to enable debugging log. You might also want

Detect phone calls?

Is it possible to detect when someone is calling the number instead of sending an sms? and in response send them a text message?

Re: Regarding phone as SMSC

Look for the portion in userguide where GSM modem is used. On Thu, Sep 8, 2016 at 10:34 AM, wrote: > Hi, > > > We are trying to use a phone as a SMSC. Unfortunately the user guide > doesn't provide much knowledge of the same. So can anyone help us out in > this regard?

Regarding phone as SMSC

Hi, We are trying to use a phone as a SMSC. Unfortunately the user guide doesn't provide much knowledge of the same. So can anyone help us out in this regard? Thanks & Regards , [1465364660683_signature_1.png] Pratikshya Mishra Project Engineer Wipro Limited<http://w

Re: Kannel mobile phone list

Hi There is no such list. But in general any phone that support AT commands should work. Note that some nokia phones does not support CNMI command that is used for receiving MO's; although there are some workarounds. Regards Alvaro On 6/20/13, Santosh Bhabal wrote: > Hi Experts, >

Kannel mobile phone list

Hi Experts, I wanted to configure kannel with mobile phone as gsm mobile to send sms. Please provide me the list of mobile phones which kannel supports? Regards Santosh

RE: Picking up SMS from Phone

Try to set message-storage = “ME” in group = modems. See users manual. From: users [mailto:users-boun...@kannel.org] On Behalf Of ha...@aeon.pk Sent: woensdag 12 juni 2013 17:08 To: Alvaro Cornejo Cc: users@kannel.org Subject: Re: Picking up SMS from Phone I tried this already; still

Re: Picking up SMS from Phone

I tried this already; still kannel does not pick up SMS already present in the phone. I found a workaround, by moving the SMS manually from phone settings, to SIM. Only then, kannel picks the SMS. There is a downside to this too. More than often, kannel pings device for memory check, some error

Re: Picking up SMS from Phone

Hi Omar Set sim-buffering to true in modem config. This will make kannel search periodically por sms on the phone that might goy stuck on it. Regards Alvaro On 6/12/13, spameden wrote: > you forgot to include users list as well. > > try contacting the author of the mentioned program,

Re: Picking up SMS from Phone

you forgot to include users list as well. try contacting the author of the mentioned program, he might help you. 2013/6/12 Saad Omer > Sony Ericsson K750. > > The problem is that when disconnected from kannel, the phone gets incoming > SMS which do not route to kannel upon rec

Re: Picking up SMS from Phone

what kind of phone you've got? i'm not sure but you might try contacting author of MyPhoneExplorer for tips regarding SonyEricsson. check here http://www.fjsoft.at/en/downloads.php it's a nice program for windows for SE and some other phones, you can read contacts / SMS with it

Picking up SMS from Phone

Hi, I am using a Sony Ericsson phone as a modem with kannel. It works fine most of the time, however sometimes it gets disconnected without reason. I fix this issue by restarting the phone. But during the period when phone is not connected to kannel, the SMS arriving at the phone are stored there

Re: How to send sms using kannel and android phone (Samsung galaxy ace)

rying to configure kannel to send sms using my samsung >> android phone (Galaxy ace) but failed to do the same. I was wondering if it >> is really possible to send sms using the same phone as I am not even able >> to test the AT commands using minicom. It dosent any output wh

Re: How to send sms using kannel and android phone (Samsung galaxy ace)

You can write an android app for that. On Jun 8, 2013 11:24 PM, "udit mittal" wrote: > I have been trying to configure kannel to send sms using my samsung > android phone (Galaxy ace) but failed to do the same. I was wondering if it > is really possible to send sms using the

How to send sms using kannel and android phone (Samsung galaxy ace)

I have been trying to configure kannel to send sms using my samsung android phone (Galaxy ace) but failed to do the same. I was wondering if it is really possible to send sms using the same phone as I am not even able to test the AT commands using minicom. It dosent any output when I type the

Re: how to filter phone No.

Hi Check kannel manual for allowed-prefix On Sat, Mar 30, 2013 at 11:27 PM, Alok Srivastava wrote: > Dear list > i want to filter Mo Number like if no. starts from 7,8 or 9 then kannel > submits message to smsc, otherwise kannel does not submit message to smsc. > i am using sqlbox. can i do it

Re: Empty %P (phone number of the receiver) when receiving SMS-MO through SMPP

users@kannel.org Subject: Re: Empty %P (phone number of the receiver) when receiving SMS-MO through SMPP Hey Olivier, Here is the ridiculous workaround I have for this problem in my receiving script: http://pastie.org/pastes/7452351/text?key=htasifwopjjidtyqgoig this is in PHP but it's ju

Re: Empty %P (phone number of the receiver) when receiving SMS-MO through SMPP

sm_default_msg_id: 0 = 0x0000 2013-04-11 12:04:42 [24461] [9] DEBUG: sm_length: 4 = 0x0004 2013-04-11 12:04:42 [24461] [9] DEBUG: short_message: "stop" 2013-04-11 12:04:42 [24461] [9] DEBUG: SMPP PDU dump ends. As you can see I have "[to:36312]" in my access.log, but the called URL shows "&receiver=". How can I retreive the receiver's phone number in my URL ? Thank you in advance for your help ! Best regards, Olivier PELLEGRINO France

Empty %P (phone number of the receiver) when receiving SMS-MO through SMPP

1 12:04:42 [24461] [9] DEBUG: registered_delivery: 0 = 0x 2013-04-11 12:04:42 [24461] [9] DEBUG: replace_if_present_flag: 0 = 0x 2013-04-11 12:04:42 [24461] [9] DEBUG: data_coding: 0 = 0x 2013-04-11 12:04:42 [24461] [9] DEBUG: sm_default_msg_id: 0 = 0x0000 2013-04-

how to filter phone No.

Dear list i want to filter Mo Number like if no. starts from 7,8 or 9 then kannel submits message to smsc, otherwise kannel does not submit message to smsc. i am using sqlbox. can i do it between send_sms and sent_sms table. Numbers are starting from 91 like 917894561238. i have to remove 91 then c

RE: Contents of Users Digest Vol 74, Issue 53 Topic Half messages sent to phone

Hello, Well, Ive realized what the source of the problem is - I had encoded my responses "see topic.. Contents of users Digest, Vol 74, Issue 11 Topic HTTP Encoding" and now that Ive removed that coding=2 and charset=utf-8, My responses are being received fine. But now I'm not sure what to use in

Re: Half messages sent to phone

logs, I see the message is inserted in full just as it appears, but when I > receive it on phone, some text are cut off. What could be the problem here? > This is for all networks I test on. > > > Saludos > > Ombongi Moraa fe > Willy Mularto F300HD+MR18DE (NLC1725)

RE: Half messages sent to phone

I don't know what the cause of this problem could be; When I check kannel logs, I see the message is inserted in full just as it appears, but when I receive it on phone, some text are cut off. What could be the problem here? This is for all networks I test on. Saludos Ombongi Moraa fe

Re: Getting my Android Phone to send SMS

>> S2 connected, Kies running as well. I will again try and run it and see. >>> >>> Regards, >>> >>> >>> On Sat, Sep 15, 2012 at 3:22 PM, Rene Kluwen wrote: >>> >>>> You need to elaborate more on your group = smsbox (sendsms-port)

Re: Getting my Android Phone to send SMS

; >> On Sat, Sep 15, 2012 at 3:22 PM, Rene Kluwen wrote: >> >>> You need to elaborate more on your group = smsbox (sendsms-port) and add >>> a group = sendsms-user. See the users guide. >>> >>> ** ** >>> >>> *From:* Manoj

Re: Getting my Android Phone to send SMS

s-port) and add >> a group = sendsms-user. See the users guide. >> >> ** ** >> >> *From:* Manoj M N [mailto:m4n0...@gmail.com] >> *Sent:* Friday, 14 September, 2012 17:22 >> *To:* Rene Kluwen >> *Cc:* us...@vm1.kannel.org >> >> *Subject:

Re: Getting my Android Phone to send SMS

> *Cc:* us...@vm1.kannel.org > > *Subject:* Re: Getting my Android Phone to send SMS > > ** ** > > Thanks Rene, > > I was able to connect this time. I didn't do everything, but I just added > the init-string and detect-string. Looks like bearerbox is now able t

RE: Getting my Android Phone to send SMS

You need to elaborate more on your group = smsbox (sendsms-port) and add a group = sendsms-user. See the users guide. From: Manoj M N [mailto:m4n0...@gmail.com] Sent: Friday, 14 September, 2012 17:22 To: Rene Kluwen Cc: us...@vm1.kannel.org Subject: Re: Getting my Android Phone to send SMS

RE: Getting my Android Phone to send SMS

Does this help? http://www.bdsatish.in/software/android-usb-modem.html From: users-boun...@vm1.kannel.org [mailto:users-boun...@vm1.kannel.org] On Behalf Of Manoj M N Sent: Friday, 14 September, 2012 08:14 To: us...@vm1.kannel.org Subject: Re: Getting my Android Phone to send SMS

Re: Getting my Android Phone to send SMS

h this is connected. On a mac there is no > /var/log/messages. So I checked the console and on connecting the phone the > following message is printed > > Sep 12 18:16:52 dhcp-173-39-64-34 pcscd[8444]: Non-smartcard device > launched pcscd [Vendor: 0X4E8, Product: 0X6860] > > But

Samsung Phone and Kannel

Hello Does kannel works well in a) Samsung galaxy phones b) Huawei USB sticks   crisostomo arias

Re: Kannel and one phone number produce 500 code error

verthing and is not working >> >> Willy Mularto >> F300HD+MR18DE (NLC1725) >> >> >> >> >> >> >> >> >> >> >> > > Ok, I am moving forward in my stupidity ! :)) I have figured out that CMS ERROR: 500 in

Re: Kannel and one phone number produce 500 code error

ing this tool http://twit88.com/home/utility/sms-pdu-encode-decode this procedure give me message on receiving phone. So, it should be same procedure in Kannel - just need to initialize modem in proper way: AT+CMGF=0 (work in PDU mode) AT+CSCS="UCS2" (using Hex) AT+CMGS=25 (calculated for

Re: Kannel and one phone number produce 500 code error

11:29 [3708] [8] DEBUG: re-queing SMS not-yet-to-be resent >>> 2012-01-10 11:11:29 [3708] [8] DEBUG: sms_router: handling message >>> (0x8d215e0 vs 0x8d215e0) >>> 2012-01-10 11:11:29 [3708] [8] DEBUG: re-queing SMS not-yet-to-be resent >>> 2012-01-10 11:11:29 [3708] [8] DEBUG: sms_router: time to sleep 30.00 >>> secs. >> any ideea way? i have try everthing and is not working > > Willy Mularto > F300HD+MR18DE (NLC1725) > > > > > > > > > > > -- View this message in context: http://old.nabble.com/Kannel-and-one-phone-number-produce-500-code-error-tp33112878p33188132.html Sent from the Kannel - User mailing list archive at Nabble.com.

Re: Kannel and one phone number produce 500 code error

what to check? On Tue, 10 Jan 2012 16:50:20 +0700, Willy Mularto wrote: > please check google and or the archive ;) > > On Jan 10, 2012, at 4:17 PM, Zaharia Constantin wrote: > >> hy, i have this config http://bin.cakephp.org/view/1699351229 [1] and is working just fine for all the numb

Re: Kannel and one phone number produce 500 code error

please check google and or the archive ;) On Jan 10, 2012, at 4:17 PM, Zaharia Constantin wrote: > > hy, i have this config http://bin.cakephp.org/view/1699351229 and is > working just fine for all the numbers on both modems, but when i try to send > a message to this number 0729827318

Kannel and one phone number produce 500 code error

hy, i have this config http://bin.cakephp.org/view/1699351229 [1] and is working just fine for all the numbers on both modems, but when i try to send a message to this number 0729827318 i get this error: > 2012-01-10 11:11:25 [3708] [6] DEBUG: AT2[cosmote_SMSC]: ^Z > 2012-01-10 11:11:27 [3708

BEST Cell phone to use with Kannel!

Hey there, I've been using kannel with two years now with Cellphone's acting as GSM modems. can you please suggest a cheap old cell phone that works in perfect harmony with kannel? Please Help! *If you want to read more:* I first used Moto Pebl, also known as Motorola U6, it

Is my phone capable ?

Dear All .. I want to learn kannel. All I have is just a simple cellphone. I used it with gammu with no problem (afaik). I look in modem.conf .. and there is "init" part, And I don't know my modem AT command for proper init. here is some of the test ---START AT OK ATE1 OK AT+MODE=2

Re: Phone Switches automatically

I experienced the same problem with a w300i and it was solved after I cleaned the connector's contacts, because the phone was detecting disconnect and connect with the slightest movement of cable or phone. Does it happen even if you dont move or touch the cable or the phone? BR, Alex Sent

Phone Switches automatically

Hello, my Sony Ericsson w200i automatically switches itself into file transfer mode... :S which stops my service. Any idea why it does that? Thanks, ߣ∂ςқ

RE: Using Huawei Ideos Android phone with Kannel

Sent: Saturday, 20 August, 2011 21:59 To: Nikos Balkanas Cc: users@kannel.org Subject: Re: Using Huawei Ideos Android phone with Kannel Thanks Alvaro and Nikos, I have never used minicom before, but after I installed it, this is what I saw after initializing it on the command line: Welcome to

Re: Using Huawei Ideos Android phone with Kannel

me to ask this, but how do I enter AT+CNMI? I've tried but all I get is the same screen as above. Thank you. KR, Joseph. On Sat, Aug 20, 2011 at 9:38 PM, Nikos Balkanas wrote: > For a how-to on using CNMI, read in UG about modem initialization. There is > a whole section about it. To s

Re: Using Huawei Ideos Android phone with Kannel

For a how-to on using CNMI, read in UG about modem initialization. There is a whole section about it. To see if your phone supports CNMI at all, using minicom or another serial communication program, issue at the prompt: AT+CNMI? BR, Nikos On Sat, Aug 20, 2011 at 6:55 PM, Joseph Koech wrote

Re: Using Huawei Ideos Android phone with Kannel

Don´t know about the android phone but the CNMI command instructs the phone to forward received MOs to the AT interface i.e. kannel so it can be processed. Google a bit for the command and you will find several references for the meaning of each of the allowed parameters. Note that not all

Using Huawei Ideos Android phone with Kannel

Greetings, I have been using kannel with Huawei Modems, specifically E160. It's working perfectly well in both sending and receiving messages. It occured to me at some point that I needed to connect my kannel gateway with an Adnroid Phone, Huawei Ideos to be specific. What i don't unde

Re: Phone as modem throughput

; Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > > On Fri, Jul 22, 2011 at 7:58 PM, Alejandro Mejia Evertsz > wrote: >> Hello Kannel users, >> I'm wondering if this can be tweaked somehow, or it really depends on the >>

Re: Phone as modem throughput

nline               Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Fri, Jul 22, 2011 at 7:58 PM, Alejandro Mejia Evertsz wrote: > Hello Kannel users, > I'm wondering if this can be tweaked somehow, or it really depends on the > phone I'm using as modem for kannel?

Phone as modem throughput

Hello Kannel users, I'm wondering if this can be tweaked somehow, or it really depends on the phone I'm using as modem for kannel? For all of you using a phone/modem, please let me know if you get a better throughput than this (which I think is very very slow). SMS: received 0

Re: DLR using a phone [" Could not route message to smsbox id <0>, smsbox is gone!²]

Mejia Evertsz > Cc: users@kannel.org > Subject: Re: DLR using a phone [" Could not route message to smsbox id <0>, > smsbox is gone!²] > > Hola Alejandro: > > Thanks for your kind offer. A pair of fresh eyes is always good. You (or > someone else) may spot things t

Re: DLR using a phone

You are absolutely right. I missed that part completely. It is a well-known fact that some operators do not send DLRs to SIMs (phone modems). DLR8 is just generated by kannel. BR, Nikos On Wed, Jul 13, 2011 at 12:13 AM, Rene Kluwen wrote: > Am I wrong or is this another thread with a wr

RE: DLR using a phone [" Could not route message to smsbox id <0>, smsbox is gone!²]

van der Poel Sent: Tuesday, 12 July, 2011 22:00 To: Alejandro Mejia Evertsz Cc: users@kannel.org Subject: Re: DLR using a phone [" Could not route message to smsbox id <0>, smsbox is gone!²] Hola Alejandro: Thanks for your kind offer. A pair of fresh eyes is always good. You (or s

RE: DLR using a phone

, 2011 14:39 To: Alejandro Mejia Evertsz Cc: us...@vm1.kannel.org Subject: Re: DLR using a phone Hi, I didn't see your initial post that you are getting DLRs through the phone. There is another possibility: 1) DLR = 8 is not really a DLR from your SMSc. It is just an ACK which is converted to DL

Re: DLR using a phone [" Could not route message to smsbox id <0>, smsbox is gone!²]

hehehe) >>> I'm getting the first dlr from the smsc and it's calling my dlr-url >>> correctly (I made a perl .cgi that get's the parameters and store the >>> new dlr status on mysql). >>> So far, I guess we both got to the same place ;) >>>

Re: DLR using a phone

Hi, I didn't see your initial post that you are getting DLRs through the phone. There is another possibility: 1) DLR = 8 is not really a DLR from your SMSc. It is just an ACK which is converted to DLR by kannel. 2) Look for deliver_sm in your logs. Are you getting any? If not check

Re: DLR using a phone

give me full dlrs). Nikos confirmed that I'm using the right mask, so now I have to strugle with my operator's smsc. I guess I'll try the other 2 operators smsc with other sims on the same phone to check if any of them provide with full dlrs. Thanks a lot for the time you took to e

Re: DLR using a phone

right thing for it to give me full dlrs). > Nikos confirmed that I'm using the right mask, so now I have to strugle > with my operator's smsc. > I guess I'll try the other 2 operators smsc with other sims on the same > phone to check if any of them provide with full dlr

Re: DLR using a phone

7;s smsc. I guess I'll try the other 2 operators smsc with other sims on the same phone to check if any of them provide with full dlrs. Thanks a lot for the time you took to explain me how dlr-url works. Cheers! Alejandro On 11/07/2011 05:01 p.m., Michael van der Poel wrote: Hi Alejandro,

Re: DLR using a phone

Thanks for your reply Nikos. I guess that if I call my mobile operator's customer service, they won't even know what I'm talking about hehehe. The phone I'm using is an Android, so I'll make some more tests using the phone directly to find out if it gets the &qu

Re: DLR using a phone

orrect me where I am wrong. Regards, Michael On 11/7/11 23:17, "Alejandro Mejia Evertsz" wrote: > Hello everyone. > Excuse me for this dumb question, but I got lost on the UG regarding this. > I'm using an LG phone and I have MT and MO working fine. > Wh

Re: DLR using a phone

Hi, You are doing the right thing. It seems to be your smsc problem. Talk to them. dlr-mask = 31 covers all possible reports. BR, Nikos - Original Message - From: "Alejandro Mejia Evertsz" To: Sent: Tuesday, July 12, 2011 1:17 AM Subject: DLR using a phone Hell

DLR using a phone

Hello everyone. Excuse me for this dumb question, but I got lost on the UG regarding this. I'm using an LG phone and I have MT and MO working fine. When sending a message via HTTP I'm setting dlr-mask=31 I'm getting DLR correctly but only with status = 8 (delivered to smsc). Whe

Re: Re : How to change Phone Number to Name when getting SMS on phone screen

Check from your operator is it has enabled masking over your SMS shortcode account. On Wed, Mar 23, 2011 at 1:32 PM, Kidi Kidi wrote: > I have replaced the "From Field" by a name and sent a SMPP message to my > phone, but i didn't get any > message. But if the "Fro

Re: Re : How to change Phone Number to Name when getting SMS on phone screen

. 9.32 skrev Kidi Kidi: I have replaced the "From Field" by a name and sent a SMPP message to my phone, but i didn't get any message. But if the "From Field" is my shortcode i do get my message. So i think hamza are right by saying you can only use it if it is allowed by

Re: Re : How to change Phone Number to Name when getting SMS on phone screen

No You can use an alternative telco for MT messages. BR Cezary Siwek On 23/03/2011 08:32, Kidi Kidi wrote: I have replaced the "From Field" by a name and sent a SMPP message to my phone, but i didn't get any message. But if the "From Field" is my shortcode i do g

Re : How to change Phone Number to Name when getting SMS on phone screen

I have replaced the "From Field" by a name and sent a SMPP message to my phone, but i didn't get any message. But if the "From Field" is my shortcode i do get my message. So i think hamza are right by saying you can only use it if it is allowed by your telco operator o

Re: How to change Phone Number to Name when getting SMS on phone screen

d > > > > *From:* users-boun...@kannel.org [mailto:users-boun...@kannel.org] *On > Behalf Of *Kidi Kidi > *Sent:* 22 March 2011 14:33 > *To:* users@kannel.org > *Subject:* How to change Phone Number to Name when getting SMS on phone > screen > > > > Great Th

RE: How to change Phone Number to Name when getting SMS on phone screen

you have Kannel configured. Richard From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf Of Kidi Kidi Sent: 22 March 2011 14:33 To: users@kannel.org Subject: How to change Phone Number to Name when getting SMS on phone screen Great Thanks hamza, I don't understand,

How to change Phone Number to Name when getting SMS on phone screen

Great Thanks hamza, I don't understand, could you give me more explanation please? De : "ha...@aeon.pk" À : Kidi Kidi Cc : users@kannel.org Envoyé le : Mar 22 mars 2011, 14h 07min 21s Objet : Re: How to change Phone Number to Name when getti

Re: How to change Phone Number to Name when getting SMS on phone screen

Use MASK field while sending SMS from application. On Tue, Mar 22, 2011 at 6:52 PM, Kidi Kidi wrote: > Hi all, > > When i get a SMS on my phone i see the FROM number, but i want to change > this number to alphabetical value. For exemple i want that if i send a SMS > to somebo

How to change Phone Number to Name when getting SMS on phone screen

Hi all, When i get a SMS on my phone i see the FROM number, but i want to change this number to alphabetical value. For exemple i want that if i send a SMS to somebody, this person must see the name of my school instead of my phone number. I know that it's possible, but kannel can do that?

Newbie: Configuration-SMS to a series 60 3;d generation phone

Greetings. I must have read every forum, mailing list as well as specifications available on the net, still I can't seem to get this working. I want to send imap/smtp/syncml configuration to a Nokia E52 phone using Kannel. I followed the simple guide available here: http://mobiforg

Re: replacing WAP Push on mobile phone

support for this depends on the handset receiving the message. /Jacob On Tue, 2011-02-15 at 13:19 +0100, Latitude Berlin wrote: > I was able to replace the reached SMS on the phone using pid. > > 2011/2/14 Nikos Balkanas > You cannot replace an SMS once it has reached the

Re: replacing WAP Push on mobile phone

I was able to replace the reached SMS on the phone using pid. 2011/2/14 Nikos Balkanas > You cannot replace an SMS once it has reached the mobile. You just send a > new one. You could replace an SMS at the SMSc, before reaching the mobile, > but kannel doesn't support that

Re: replacing WAP Push on mobile phone

011 4:39 PM Subject: replacing WAP Push on mobile phone Hi Everyone, How can I replace a WAP Push message sent via Kannel on a mobile phone? I can do this for plain SMS by using 'pid' in the HTTP send request. Regards.

replacing WAP Push on mobile phone

Hi Everyone, How can I replace a WAP Push message sent via Kannel on a mobile phone? I can do this for plain SMS by using 'pid' in the HTTP send request. Regards.

Re: recieve sms without phone

By your logs, you are still having something using the port you defined in kannel config. In the other hand, there is no way you can receive sms (nor send them) without having a connection to the celular network. You need either a modem, a phone, a SMPP, a HTTP or whatever means to connect kannel

recieve sms without phone

rasha...@rashad-laptop:~$ sudo smsbox /etc/kannel/kannel.conf 2010-12-07 16:54:15 [6692] [0] INFO: Debug_lvl = -1, log_file = , log_lvl = 0 2010-12-07 16:54:15 [6692] [0] DEBUG: Kannel smsbox version `1.4.3'. Build `Apr 6 2010 13:16:08', compiler `4.4.3'. System Linux, release 2.6.32-23-generic-pa

Phone reply item

Hi, i would like to know if it is posible to send instructions via smpp to the phone set an option when reading the message like "accept" and autoreply. Thanks in advance. Luis Jimenez

Re: [SOLVED] Re: sms is not delivered to phone

Cc: Sent: Wednesday, July 28, 2010 12:55 PM Subject: [SOLVED] Re: sms is not delivered to phone Thanks a lot for the hint. It was very helpful. Having the dlr err response I've contacted with SMSC people and it turned out that there is a filter which forbade to send to another operators.

[SOLVED] Re: sms is not delivered to phone

the same > SMS). > > BR, > Nikos > - Original Message - From: "dorian" > To: > Sent: Tuesday, July 27, 2010 12:04 PM > Subject: sms is not delivered to phone > > >> Hi all. >> I am fresh user of the Kannel so I have probably typical beginne

Re: sms is not delivered to phone

U also need to make sure your phone number is in the correct format. E.g, if your are in the UK, you number could be 4479 or simply 079 or even +79. try both options but most likely, its the country code+number (without a +) that will work. -- Allan 2010/7/27 Nikos

Re: sms is not delivered to phone

Hi, Please specify in your sendsms url &dlr-mask=31 and repost maximum detail relevant bb logs (of submission & reception (DLR) of the same SMS). BR, Nikos - Original Message - From: "dorian" To: Sent: Tuesday, July 27, 2010 12:04 PM Subject: sms is not delive

sms is not delivered to phone

Hi all. I am fresh user of the Kannel so I have probably typical beginner problem. I am using Nokia CIMD2 connection. After issuing the command: lynx "http://127.0.0.1:13013/cgi-bin/sendsms?username=tester&password=foobar&to=00489&text=mytestsms"; (where 9

Re: Unwanted characters in sender phone number escape code output %q and %p

e - From: Scott Geller > To: users > Sent: Saturday, July 24, 2010 6:10 AM > Subject: Unwanted characters in sender phone number escape code output %q > and %p > > > > > > Hi All > > > I'm getting unusual output in my escape codes %q and %p and I'd

Re: Unwanted characters in sender phone number escape code output %q and %p

zillions of functions to urldecode text. Just use one of them. You can also try: exec = perl test.pl %p %k BR, Nikos - Original Message - From: Scott Geller To: users Sent: Saturday, July 24, 2010 6:10 AM Subject: Unwanted characters in sender phone number escape code output %q and %p

Unwanted characters in sender phone number escape code output %q and %p

Hi All I'm getting unusual output in my escape codes %q and %p and I'd appreciate some help if possible from my conf file: group = sms-service keyword = test exec = perl test.pl %q %k omit-empty = true (I know it's a bad idea to execute - i'll look into URL once I get this working) >From my sm

  1   2   3   4   >