Thank you for your reply.
I think that my problem could be at the level of permissions granted to kannel.
Now how to check the permissions granted to kannel?
thank you,
Regards.
Hi
Kannel questions are to be sent to kannel lists. Either users o devel.
You need to create/config the sms-service entries in kannel config
files. You also need to be sure kannel has enough permission to call
the url you defined in get-url.
Check manual for more detailed info.
Regards
Alvaro
I have added "smsbox-port=13002" in group core of opensmpp.conf file. But it
doesnt work for me. Any other mistake.
Regards
Hamid R. Hashmi
> From: rene.kluwen
> To: hamid2kv...@hotmail.com
> CC: users@kannel.org
> Subject: RE: Please help me in configureing Opensmppbo
: Please help me in configureing Opensmppbox (bind Failed)
I have gone through many asked question, but they didnt work for me. I have
the same problem in configuring opensmppbox.
Client Logs
2014-01-23 17:15:16 [12357] [6] DEBUG: Connecting to <172.16.37.103>
2014-01-23 17:15:16 [12357] [6]
Hi Mike,
With this config, all should be fine. Do you have this problem too using a
live SMSC?
--
Regards
Kenny
On Thu, Jan 5, 2012 at 9:09 AM, Niel Smith wrote:
> Hi,
>
> I've also noticed the same behaviour when using a fake smsc, and as far as
> I can tell this is normal.
>
> When sending
Hi,
I've also noticed the same behaviour when using a fake smsc, and as far as
I can tell this is normal.
When sending a looong MTSMS, the message is fragmented / broken into pieces
and sent as separate SMSs. Normally you will be charged for each one. (See
max-messages under group = sms-service).
Hi,
below is my kannel config, when i send a 3 part message it is delivered in 3
separate messages,instead of one message with 3 pages. what do i add to my
config to enable all the message parts to be packaged as one message?
I amusing SQLBOX with my Kannel
group = smsc
smsc = fake
smsc-id = FA
You have to remove the space between lines in both conf file, and try again
On 10/8/11, Wanjiku Mwangi wrote:
> Hello Kannel users, am Samuel Mwangi and new to Kannel. I have problems
> configuring Kannel on Ubuntu OS running XAMPP 1.7.7. I am not sure the
> problem is in my smskannel.conf or mod
The error is explicitly stated in the log. You have wrong configuration on
group modem on line 30 and you have mistyped it, it should be detect-string not
datect-string.
On Oct 9, 2011, at 7:50 AM, Wanjiku Mwangi wrote:
> Hello Kannel users, am Samuel Mwangi and new to Kannel. I have problem
Hello Kannel users, am Samuel Mwangi and new to Kannel. I have problems
configuring Kannel on Ubuntu OS running XAMPP 1.7.7. I am not sure the
problem is in my smskannel.conf or modems.conf. I am using a Huawei model
E160 HSDPA USB Stick Safaricom Modem. When I attempt to start the kannel
server he
gateway-1.4.3/gw/smskannel.conf
>
> To start smsbox you call : ~/download/gateway-1.4.3/gw/smsbox
> smskannel.conf
>
>
>
>
>
>
>
> - Original Message -
> From: "alexis_msn"
> To:
> Sent: Monday, July 25, 2011 1:54 PM
> Subject: Re
/gw/smsbox
smskannel.conf
- Original Message -
From: "alexis_msn"
To:
Sent: Monday, July 25, 2011 1:54 PM
Subject: Re: Need help starting kannel, please help
Hi there Tania
Thanks for the reply but I do have the smsc groupt in my smskannel.conf
file. I didn'
gt;
> Tania
>
>
> - Original Message -
> From: "alexis_msn"
> To:
> Sent: Monday, July 25, 2011 1:13 PM
> Subject: Need help starting kannel, please help
>
>
>>
>> Hi all,
>>
>> I've checked in this forum for an
Try to add to your config an smsc group (even the fake one)
I guess that it can't find any smsc and it stops there.
Tania
- Original Message -
From: "alexis_msn"
To:
Sent: Monday, July 25, 2011 1:13 PM
Subject: Need help starting kannel, please help
Hi all,
r in mind that
I'm new with this thing and I simply want to learn to use kannel as a sms
plataform.
Thank you for your attention and my apologies if there is a post regarding
this same issue that I missed when looking.
Alexis C.
--
View this message in context:
http://old.nabble.com/Need-help-starting-kannel%2C-please-help-tp32128784p32128784.html
Sent from the Kannel - User mailing list archive at Nabble.com.
1 12:53
To: Tshimanga Minkoka
Subject: Re: Please help me with kannel conf...
Dear Tshimanga,
I'm new to Kannel and much appreciate help with configuring.
I was wondering if you have an example configuration for Kannel 1.5 to
-send incoming sms to an application using http
-write all incoming
Hi Tshimanga!
Many thanks for your reply!
Can you read my message "gateway http-response 202 and 200 " on users
channel - if you have any ideas on this? Community I have not yet
responded, and the timing of the project are nearing completion. I ran
out of ideas on this subject...
---
status wapbox
exit $?
;;
*)
echo "Usage: named {start|stop|status|restart}"
RETVAL=1
esac
exit $RETVAL
TSHIMANGA Minkoka
VAS Manager
Mob: +243 814443113
Tel: +243 815560341 ext. 0583
Fax: +243 813010373
Email: tshimanga.mink...@vodacom.cd
Web: http://www.vod
I'm stil having the same problem :( :( . It's so frustrating :( .
I'm using a SIMCOM modem . I'm attaching my configuration file and my log
files. Please help me out.
2011/3/28 Nikos Balkanas
> Hi,
>
> Your problem is obvious from the status page. Your AT SMSc
"3: Queued for later delivery" problem-Please help :(
Hi all :)
I'm 19, a student and i'm from India. I've set up my kannel.conf
file and when i run my bearerbox it runs smoothly and my status.html page
shows
"Status: runni
t;Samsung Corby pro B5310" mobile as the modem. (I'm not
sure if it actually supported by kannel)
I'm attaching my config page along with this. PLEASE HELP ME!!! :(
=
[from:9810689924] [to:9810689924] [flags:-1:0:-1:-1:-1] [msg:66:testing again : Please let me know if you get this message :Tarun] [udh:0:]
If you see in first log line...from and to numbers are correct but in the third/last line above i do know how the from and to number have become equal o
~/${output}.diff
else
echo "Failed to create kannel patch \"~/${output}.diff\" ($res)"
fi
- Original Message -
From: "Alvaro Cornejo"
To: "Nikos Balkanas" ; "Tilani gunawardena"
Cc:
Sent: Friday, March 12, 2010 3:51 PM
Subject
st.
>
> BR,
> Nikos
> - Original Message - From: "Tilani gunawardena"
> To:
> Sent: Friday, March 12, 2010 6:14 AM
> Subject: Cant receive messages Please HELP
>
>
>> hi im trying to "RECEIVE " message from kannel few weeks .i went
>
s, you will get plenty of
answers to "CNMI".
If after all this, you still have problems, please post relevant detailed bb
logs to this list.
BR,
Nikos
- Original Message -
From: "Tilani gunawardena"
To:
Sent: Friday, March 12, 2010 6:14 AM
Subject: Cant receive m
hi im trying to "RECEIVE " message from kannel few weeks .i went
thought USER manual and lot other documentations.i can "send sms" with
no problem.can anyone help with this problem.im running appache server
and here is my kannel.conf file
# Default kannel configuration file
group = core
admin-port
Yes, please do. Everything else seems OK.
BR,
Nikos
- Original Message -
From: chini lion
To: Nikos Balkanas
Cc: us...@vm1.kannel.org
Sent: Friday, August 14, 2009 12:21 PM
Subject: Re: No solution worked: Error while gw_gethostbyname occurs. please
help
Hi Nikos
port `13001'
2009-08-14 10:14:14 [28252] [0] PANIC: Couldn't connect to the bearerbox.
2009-08-14 10:14:14 [28252] [0] PANIC: sbin/smsbox(gw_panic+0xa4) [0x80828a4]
2009-08-14 10:14:14 [28252] [0] PANIC: sbin/smsbox(main+0xce0) [0x8053cd0]
2009-08-14 10:14:14 [28252] [0] PANIC:
/lib/tls/libc.
annel.org
Sent: Wednesday, August 12, 2009 6:35 PM
Subject: Re: No solution worked: Error while gw_gethostbyname occurs. please
help
Hi Nikos,
I am using localhost for bearer box and it can be reached.
gethostbyname entry in gw-config.h
:
/* Define for various gethostbyn
: Wednesday, August 12, 2009 3:18:34 PM
Subject: Re: No solution worked: Error while gw_gethostbyname occurs. please
help
Hi,
About that, what is your bearerbox-host entry in your smsbox configuration? Can
you ping it from smsbox?
If not, you should declare it in /etc/hosts.
If yes, what is your OS, and
list
Sent: Wednesday, August 12, 2009 1:43:57 PM
Subject: Re: No solution worked: Error while gw_gethostbyname occurs. please
help
lionesschi schrieb:
> Please help, been having this issue for 2 weeks and cant move any further
> despite all searches and solutions.
>
> Please i need t
:41:35 PM
Subject: Re: No solution worked: Error while gw_gethostbyname occurs. please
help
First thing popped up to my mind, do You use FQDN for bearerbox-host
and does that host resolve correctly ?
--
Henri
On Wed, Aug 12, 2009 at 3:25 PM, lionesschi wrote:
>
> Please help, been having
Hovi"
To: "Users mailing list"
Sent: Wednesday, August 12, 2009 3:41 PM
Subject: Re: No solution worked: Error while gw_gethostbyname occurs. please
help
First thing popped up to my mind, do You use FQDN for bearerbox-host
and does that host resolve correctly ?
--
Henri
On
lionesschi schrieb:
> Please help, been having this issue for 2 weeks and cant move any further
> despite all searches and solutions.
>
> Please i need this for work and its been delayed for so long
>
> 2009-07-31 11:51:13 [8] [0] INFO: HTTP: Opening server at port 13000.
First thing popped up to my mind, do You use FQDN for bearerbox-host
and does that host resolve correctly ?
--
Henri
On Wed, Aug 12, 2009 at 3:25 PM, lionesschi wrote:
>
> Please help, been having this issue for 2 weeks and cant move any further
> despite all searches and solutions.
&
Please help, been having this issue for 2 weeks and cant move any further
despite all searches and solutions.
Please i need this for work and its been delayed for so long
2009-07-31 11:51:13 [8] [0] INFO: HTTP: Opening server at port 13000.
2009-07-31 11:51:13 [8] [0] DEBUG: Started
My bad, a typo if you will allow one please :-). Ofcourse a *CVS* not CSV.
On Tue, Oct 7, 2008 at 12:22 PM, Kashif Ali Bukhari <[EMAIL PROTECTED]>wrote:
> CSV ???
>
> On Tue, Oct 7, 2008 at 10:34 AM, Shoeb Ahmed <[EMAIL PROTECTED]> wrote:
> > Hi, Thanks for the reply. No I am not using a prebuilt
CSV ???
On Tue, Oct 7, 2008 at 10:34 AM, Shoeb Ahmed <[EMAIL PROTECTED]> wrote:
> Hi, Thanks for the reply. No I am not using a prebuilt package. I compiled
> it myself. However, my problem went away when I used the latest CSV instead
> of the 1.4.1 . So everything is fine now.
>
> On Sat, Oct 4,
Hi, Thanks for the reply. No I am not using a prebuilt package. I compiled
it myself. However, my problem went away when I used the latest CSV instead
of the 1.4.1 . So everything is fine now.
On Sat, Oct 4, 2008 at 1:45 PM, Kashif Ali Bukhari <[EMAIL PROTECTED]>wrote:
> seems you are using prebu
seems you are using prebuilt packeg please compile it yourself
On Mon, Sep 22, 2008 at 2:36 PM, Shoeb Ahmed <[EMAIL PROTECTED]> wrote:
> I sent this message below but haven't got any reply back. Can anyone please
> provide any insight into this problem? I really really need it to be solved.
>
> On
08 2:57 PM
> *To:* Roy Walker
> *Cc:* Eduardo Raad; users@kannel.org
> *Subject:* Re: Please help
>
>
>
> Try adding the "smsc" parameter to the sendsms URL to force using that
> route. For example:
>
> http://host:port
> /cgi-bin/sendsms?username=tester&
ubject: Re: Please help
Try adding the "smsc" parameter to the sendsms URL to force using that
route. For example:
http://host:port/cgi-bin/sendsms?username=tester&password=foobar&from...
&smsc=motorola
Regards,
Alejandro
On Tue, Sep 23, 2008 at 4:07 PM, Roy Walker <[EMAIL
l Message-
> From: Eduardo Raad [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, September 23, 2008 1:42 PM
> To: Roy Walker
> Cc: users@kannel.org
> Subject: Re: Please help
>
> The error message is telling you that the bearerbox could not find a
> valid route for that number. I
TED]
Sent: Tuesday, September 23, 2008 1:42 PM
To: Roy Walker
Cc: users@kannel.org
Subject: Re: Please help
The error message is telling you that the bearerbox could not find a
valid route for that number. I'm not sure why this is happening as I'm
using a similar configuration (witho
The error message is telling you that the bearerbox could not find a
valid route for that number. I'm not sure why this is happening as I'm
using a similar configuration (without specifying actual accepted
prefixes on the SMSC config) and it works for me.
You may try to remove the "my number"
Still having a steep learning curve on this...
Getting error like this:
2008-09-23 13:11:01 [29782] [8] DEBUG: boxc_receiver: sms received
2008-09-23 13:11:01 [29782] [8] WARNING: Cannot find SMSCConn for
message to <214555>, rejected.
2008-09-23 13:11:01 [29782] [8] WARNING: Message rej
I sent this message below but haven't got any reply back. Can anyone please
provide any insight into this problem? I really really need it to be solved.
On Thu, Sep 11, 2008 at 2:43 PM, <[EMAIL PROTECTED]> wrote:
>
>
> Message: 1
> Date: Thu, 11 Sep 2008 14:22:31 +0600
> From: "Shoeb Ahmed" <[EMA
its ok when i'm sending AT command thru minicom...
and i must add something strange on my AT commands...
i really dont know why should i state again the mobile number i send
when using AT+CMSS=[, mobile number]... cause if not that message will
not be sent...
Or /dev/ttyACM0
Sent from my iPod
On Aug 13, 2008, at 7:07 PM, "Willy Mularto" <[EMAIL PROTECTED]>
wrote:
> Hi,
> Unplug your gsm modem. Do tail -f /var/log/messages. Plug it, is it
> detected by your system or not? If yes, then try to check /dev/
> ttyUSBx or /dev/ACMEx. Is it exist. If yes, tr
Hi,
Unplug your gsm modem. Do tail -f /var/log/messages. Plug it, is it detected
by your system or not? If yes, then try to check /dev/ttyUSBx or /dev/ACMEx.
Is it exist. If yes, try to run Kannel as super user or root.
Regards,
Willy
ecking
> both dmesg and properties of the modem
> My concern is why is there a loop in connecting the modem...
> I'm just a newbie in creating a config... Please check if i'm wrong
> on the
> other parts
> cause in sending http get i used a normal html (see bel
m just a newbie in creating a config... Please check if i'm wrong on the
other parts
cause in sending http get i used a normal html (see below)...
but i dont see anything that i receive it on logs (smsbox.log and kannel.log)
i'm totally confuse
i receive it on logs (smsbox.log and kannel.log)
i'm totally confused on reading the user manual... hehehe... I'm not so good in
english
but i'm about 70% sure on my config based on manual
Please please help me
#-
# CORE
#
# There is
your modem is not accepting hardware handshake command AT+IFC=2,2 . Either
AT+IFC is not the command for your modem or the parameters 2,2 are not
supported by your modem. Check your modem AT manual for the right
command/parameters and use enable-hwhs=XX in your modem config to
overwrite defaul
Hi List,
I have been trying to receive sms using kannel but I have not succeeded yet.
Previously I was using Nokia N70 but since it doesnt support AT+CNMI command I
was unable to receive SMS. Now am configuring Kannel using LG B2000. I have a
serial data cable and I have a USB to serial conve
[22072] [4] ERROR: AT2[/dev/ttyUSB0]:
Generic error: ERROR
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: -1
I am uisng debian Linux OS...
Please help
Thanks and Regards,
mathi.
--
|-
eneric error: ERROR
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: -1
I am uisng debian Linux OS...
Please help
Thanks and Regards,
mathi.
--
|--
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <--
ERROR
2008-03-31 14:35:15 [22072] [4] ERROR: AT2[/dev/ttyUSB0]:
Generic error: ERROR
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command stat
2 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
> > 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> > 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
> > 2008-03-31 14:35:15 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
>
277A70BE8329BFD06DDDF723619
> 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
> 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
> 2008-03-31 14:35:15 [220
1 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
2008-03-31 14:35:15 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
ERROR
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
status: -1
I am uisng debian Linux OS...
Please help
Thanks and Regards,
mathi.
te_modem]: send command
> status: -1
> 2008-02-28 14:22:51 [3857] [7] DEBUG: SMSC[bite_modem]: creating DLR
> message
> 2008-02-28 14:22:51 [3857] [7] DEBUG: SMSC[bite_modem]: DLR =
>
>
> Alvaro Cornejo wrote:
> > What is your specific problem??
> >
> > I use 2
original-
De: Gytis Grigaravicius [mailto:[EMAIL PROTECTED]
Enviado el: Jueves, 28 de Febrero de 2008 04:07
Para: [EMAIL PROTECTED]
Asunto: Re: kannel fails sending messages using smsc_at. Please Help!!!
Hello,
I'm facing the same problem but with Enfora 1212 and 0116 modems. Google
giv
Hi All
Still having problems with kannel. From time to time kannel start
getting errors with sending messages. No problem with receiving.
The error repeats for every message and kannel queued them for quite
long time. Reseting the modem, kannel and even the server does not
solve the problem.
I'
> 2007-08-31 19:49:03 [24668] [4] INFO: AT2[/dev/ttyACM0]: opening device
>> > 2007-08-31 19:49:03 [24668] [4] ERROR: AT2[/dev/ttyACM0]: open failed!
>> > ERRNO=13
>> > 2007-08-31 19:49:03 [24668] [4] ERROR: System error 13: Permission
>> denied
>> > 2007
gt; > 2007-08-31 19:49:03 [24668] [4] ERROR: System error 13: Permission denied
> > 2007-08-31 19:49:03 [24668] [4] INFO: AT2[/dev/ttyACM0]: opening device
> > 2007-08-31 19:49:03 [24668] [4] ERROR: AT2[/dev/ttyACM0]: open failed!
> > ERRNO=13
> > 2007-08-31 19:49:03 [24668]
4668] [5] DEBUG: sms_router: time to sleep 30.00
> secs.
> 2007-08-31 19:49:03 [24668] [5] DEBUG: sms_router: gwlist_len = 0
> 2007-08-31 19:49:03 [24668] [3] PANIC: sbin/bearerbox [0x8056fa4]
> 2007-08-31 19:49:03 [24668] [3] PANIC: sbin/bearerbox [0x80b8c81]
> 2007-08-31 19:49:03 [24668] [3] PANIC: /lib/libpthread.so.0 [0xb7ee7112]
> 2007-08-31 19:49:03 [24668] [3] PANIC: /lib/libc.so.6(clone+0x5e)
> [0xb7b982ee]
>
>
--
View this message in context:
http://www.nabble.com/array-of-errors-%21%21-unable-to-run-kannel-please-help%21%21-log-file-given-tf4360536.html#a12449232
Sent from the Kannel - User mailing list archive at Nabble.com.
Hi, you should define "coding" when sending SMS to kannel to UCS2 or
Unicode. Since chinese character is Unicode right :D
On 3/26/07, 开 颜 <[EMAIL PROTECTED]> wrote:
Hi,all.
I am a user of kannel.I met a question.I use SMPP3.4 as a SMSC.My configure
file as follow :
You English is much better than my Chinese would be !
DCS is set by a combinations of MWI, compressions status and message
class.
DCS of 0x04 means 8 bit data. The message is only converted to alt-
charset when its a 7 bit message. Have a look where you submit the
message to smsbox and
Hi,all.
I am a user of kannel.I met a question.I use SMPP3.4 as a SMSC.My configure
file as follow :
group = smsc
smsc = smpp
host = 127.0.0.1
port = 10016
tr
Can somebody help me please... :-(
Regards,
Gunawan
- Original Message -
From: Gunawan
To: users@kannel.org
Sent: Friday, January 05, 2007 3:32 PM
Subject: Please Help... CME-515 & CMS-512
Hi all,
I'm a newbie in kannel and would like to seek for help since I'
Hi all,
I'm a newbie in kannel and would like to seek for help since I've encountered
problems.
I've installed Kannel 1.4.0 and configured for use with WaveCom (iTegno) on
Redhat ES4.
i can send / receive messages, the problem appears when the system idle for
several hours, then if i try to se
t smpp?
If so, please help me to understand the scenario.
Regards,
Mamun
--
Everyone is raving about the all-new Yahoo! Mail
beta.<http://us.rd.yahoo.com/evt=42297/*http://advision.webevents.yahoo.com/mailbeta>
Dear All,
Is there anybody who used kannel as content provider with http interface not
smpp?
If so, please help me to understand the scenario.
Regards,
Mamun
-
Everyone is raving about the all-new Yahoo! Mail beta.
hi rao <[EMAIL PROTECTED]>To: Luki Lusiano <[EMAIL PROTECTED]>Sent: Tuesday, October 31, 2006 1:02:16 PMSubject: Re: Please help with modem configurationfor kannel, you have a configuration for smsc where you need to specify whether it is a modem, or a smpp connection etc.'at' - fo
or reference that explain how to do it.for example i have downloaded full AT command for T68i sony ericsson and also have the modem configuration provided by kannel at modem.conf file and try to learn it, but still i dont know how it works.Thank you for reading,please help...
Dear All
I have nokia 6610i and I have read somewhere at
internet that it can be used with cable DLR-3P to work as SMSC, Can some one who
have already worked at it tell me? Actually I want to make my all testings
before my company gets the Short Prefix from Telco.
Waiting Anxiously
[mar
Hai Babu,
1) SMS will reach kannel sms box then you need to push it to some other application ( like Java, PHP). Where you need to write the logic.
2) Use "SMS-service" section to push the received message to your application. To use WAP PUSH you have to configure wap-box also. These configurati
Dear All,please answer me the following question:I want to set up a ringtone service using kannel and for that i want to use wap push SI. The sequence of the service will be as follow:1.users will send a request via sms specifying a keyword for ringtone.2.In response of that keyword kannel will sen
On 4/28/06, Danny Zenzano <[EMAIL PROTECTED]> wrote:
Hello,
¿Some body know if kannel Works with Linux Suse enterprise 9.2, it means 64
bits kernel?
radius1:~ # uname -a
Linux radius1 2.6.5-7.97-smp #1 SMP Fri Jul 2 14:21:59 UTC 2004 x86_64
x86_64 x86_64 GNU/Linux
I have a Segmentation fau
Title: please help me ¿Kannel works over Linux Suse Enterprise 9.2 (kernel de 64 bits)?
Hello,
¿Some body know if kannel Works with Linux Suse enterprise 9.2, it means 64 bits kernel?
radius1:~ # uname -a
Linux radius1 2.6.5-7.97-smp #1 SMP Fri Jul 2 14:21:59 UTC 2004 x86_64 x86_64
Hello Achmad,
You may program a dispatcher.php which can be in charge of
receiving all the incoming (MO) SMS, perform a query to the database
and, according to the results, invoke the apropriate action.
But, from my point of view, is better to have this decision made
within dispatcher.php
ich has never been solved AFAIK...
Thanks in advance,
Juan
[EMAIL PROTECTED] wrote:
Try this
http://www-128.ibm.com/developerworks/wireless/library/wi-
proxy.html?ca=dgr-lnxw06PushProxy
-Original Message-
From: [EMAIL PROTECTED] on behalf of Rodrigo Cremaschi
Sent: Tue 12/6/2005
Nicolas de Bari Embriz Garcia Rojas wrote:
Juan, some Motorola's come with "browser messages" off, that is why the
phone seems not to receive the WAP you should configure the phone for
allowing the "browser messages"
Yes, I'm aware of that, V3 and V300 are coming like that, but after
config
#x27;re going to save precious time on future
questions about it, since it's a recurrent topic on the mailing-
list, which has never been solved AFAIK...
Thanks in advance,
Juan
[EMAIL PROTECTED] wrote:
Try this
http://www-128.ibm.com/developerworks/wireless/library/wi-
proxy.html?ca=d
xw06PushProxy
-Original Message-
From: [EMAIL PROTECTED] on behalf of Rodrigo Cremaschi
Sent: Tue 12/6/2005 2:13 PM
To: cool planet
Cc: Kannel
Subject: Re: could you please help me guys ! ( PPG -
Kannel )
Hi Cool,
We all use Kannel (that is why we are here), we all
Message-
From: [EMAIL PROTECTED] on behalf of Rodrigo Cremaschi
Sent: Tue 12/6/2005 2:13 PM
To: cool planet
Cc: Kannel
Subject: Re: could you please help me guys ! ( PPG
- Kannel )
Hi Cool,
We all use Kannel (that is why we are here), we all are working
people, and this list
eloperworks/wireless/library/wi-proxy.html?ca=dgr-lnxw06PushProxy> > > -Original Message-> From: [EMAIL PROTECTED] on behalf of Rodrigo Cremaschi> Sent: Tue 12/6/2005 2:13 PM> To: cool planet> Cc: Kannel> Subject: Re: could you please help me guys ! ( PPG -
//www-128.ibm.com/developerworks/wireless/library/wi-proxy.html?ca=dgr-lnxw06PushProxy
-Original Message-
From: [EMAIL PROTECTED] on behalf of Rodrigo Cremaschi
Sent: Tue 12/6/2005 2:13 PM
To: cool planet
Cc: Kannel
Subject: Re: could you please help me guys ! ( PPG - Kannel
Where are you stuck?
On 12/17/05, Yared <[EMAIL PROTECTED]> wrote:
> I'm having difficulties in configuring the sms gateway. I think most of you
> have already done it. I read the user guide again and again and I still
> couldn't figure it out. Please help.
>
> --
> Have a Nice One!
I'm having difficulties in configuring the sms gateway. I think most of you have already done it. I read the user guide again and again and I still couldn't figure it out. Please help.-- Have a Nice One!
Try this
http://www-128.ibm.com/developerworks/wireless/library/wi-proxy.html?ca=dgr-lnxw06PushProxy
-Original Message-
From: [EMAIL PROTECTED] on behalf of Rodrigo Cremaschi
Sent: Tue 12/6/2005 2:13 PM
To: cool planet
Cc: Kannel
Subject: Re: could you please help me guys
: users@kannel.org
Subject: I can't install it,
please help
I have tried to install the kannel gateway, but the following error
messages was displayed
I typed the ./configure
and then the following happen, can you please help me
Configuring for Kannel gateway version
I have tried to install the kannel gateway, but the following error messages was displayed
I typed the ./configure and then the following happen, can you please help me
Configuring for Kannel gateway version 1.4.0 ...Running system checks ...
checking host system type... i686-pc-cygwin
checking
Hi Cool,
We all use Kannel (that is why we are here), we all are working
people, and this list is a "best effort" one. Declaring a subject as
"URGENT", from my point of view, will not help you, as we all have
"urgent" matters to attend every day.
Kannel lists (users and devel) do answer t
So ask the question.AarnoOn 05 Dec 2005, at 15:08, cool planet wrote: Dear friends , I'm a kannel user . Two years back i have successfully used kannel smsgateway for our sms projects. Actually it was success. So that, i wanted to thaking you all for that great works done via the kannel but t
Dear friends , I'm a kannel user . Two years back i have successfully used kannel smsgateway for our sms projects. Actually it was success. So that, i wanted to thaking you all for that great works done via the kannel but today , i have a nother requrement to have a push proxy gateway . bfor
of content file and the control file . am i correct ? if it is yes , i have to generate that two files by using the ppg-url ? please help me , get solve my problems step by step . Thank you , Kane. Aarno Syvänen <[EMAIL PROTECTED]> wrote: set ppg-url in the push configuration file. Aar
set ppg-url in the push configuration file. AarnoOn 28 Nov 2005, at 09:16, cool planet wrote: hi List, when i trying to test my ppg with following command , it gives and error saying 2005-11-28 13:55:12 [3974] [14] ERROR: Request from <172.22.6.56>: service not found ./test_ppg -q http:/
hi List, when i trying to test my ppg with following command , it gives and error saying 2005-11-28 13:55:12 [3974] [14] ERROR: Request from <172.22.6.56>: service not found ./test_ppg -q http://ip address:30080/cgi-bin/Push.cgi content.txt control.txtwhay is that ? how could i define p
1 - 100 of 160 matches
Mail list logo