--- On Sun, 2/27/11, Andras Simon wrote:
> On 2/27/11, Patrick Bartek
> wrote:
>
> > TO: OP
> >
> > If you think it's specifically a Fedora problem (I
> don't), I would install
>
> Me neither. It's just that I still think it's possible that
> it's not a
> HW problem.
>
> > (a real dual boot i
[It seems to take ages for the mailing list to forward posts,
so I have taken to cc'ing authors I reply to.]
stan wrote:
>On Sat, 26 Feb 2011 22:58:22 -0800
>"Suresh Govindachar" wrote:
>>
>> I read http://www.broadcom.com/docs/linux_sta/README.txt
>> carefully; and in each of
On Mon, Feb 28, 2011 at 4:34 PM, Larry Brower wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA512
>
> On 02/28/2011 07:47 AM, Alain Spineux wrote:
>
>>> So I did SUDO -i, and from root as shell I tried to
>>> chown -hR * fcassia on the Desktop folder...
>>
>> You must switch the star and ou
On Mon, 2011-02-28 at 20:01 -0600, Larry Brower wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA512
>
> On 02/28/2011 06:54 PM, Steve Ellis wrote:
> > On 2/28/2011 3:23 PM, Larry Brower wrote:
> >>
> >> I would say this all depends on the application being invoked and would
> >> still say i
On Mon, Feb 28, 2011 at 9:51 PM, Rahul Sundaram wrote:
> On 02/28/2011 11:34 PM, James McKenzie wrote:
>>
>> Agreed. If I want lid close, suspend, let me select it. If I don't,
>> let me select it.
>
> It is configurable via dconf.
Which is where one of the reasons given for not providing a GUI
I am sorry. I was busy for work these days, so I reinstalled fedora..I
think it will happen if I install some updates..Thanks all the way!
2011/2/24 JB
> Yunchi Wang gmail.com> writes:
>
> > ...
>
> Make sure package ABRT is installed.
> $ yum info abrt
> $ yum list abrt
>
> Run your pr
On 02/28/2011 11:34 PM, James McKenzie wrote:
>
> Agreed. If I want lid close, suspend, let me select it. If I don't,
> let me select it.
It is configurable via dconf.
Rahul
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedorap
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 02/28/2011 06:54 PM, Steve Ellis wrote:
> On 2/28/2011 3:23 PM, Larry Brower wrote:
>>
>> I would say this all depends on the application being invoked and would
>> still say it is bad to just use * as opposed to say ./*
>>
>> I can't count the nu
On Mon, 2011-02-28 at 17:09 -0500, Tom Horsley wrote:
> On Mon, 28 Feb 2011 15:55:00 -0600
> Brian Millett wrote:
>
> > With the default k3b that now uses growisofs to burn a dvd, it fails at
> > 49% every time.
>
> Are you sure it uses growisofs? I just tried to burn a dual sided
> DVD the other
On 2/28/2011 3:23 PM, Larry Brower wrote:
>
> I would say this all depends on the application being invoked and would
> still say it is bad to just use * as opposed to say ./*
>
> I can't count the number of people Ive seen do things like rm -rf * in a
> directory and it recursively started working
On Mon, 2011-02-28 at 17:09 -0500, Tom Horsley wrote:
> On Mon, 28 Feb 2011 15:55:00 -0600
> Brian Millett wrote:
>
> > With the default k3b that now uses growisofs to burn a dvd, it fails at
> > 49% every time.
>
> Are you sure it uses growisofs? I just tried to burn a dual sided
> DVD the other
On Mon, 2011-02-28 at 11:08 +1100, Chris Smart wrote:
> On Mon, Feb 28, 2011 at 10:50 AM, Geoffrey Leach wrote:
> >
> > Like I said, FWIW.
> >
>
> Sure, just making it clearer for him, in case.
>
> -c
Sorry for my very late reply of this, the laptop is down now I sent it
for fix and will have it
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 02/28/2011 05:15 PM, Patrick O'Callaghan wrote:
> The Shell will not normally expand * to a name beginning with ".". Try
> it:
>
> $ echo *
>
> See "info bash":
>
>When a pattern is used for filename expansion, the character `.' at
> the s
On Mon, 2011-02-28 at 16:34 -0600, Larry Brower wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA512
>
> On 02/28/2011 07:47 AM, Alain Spineux wrote:
>
> >> So I did SUDO -i, and from root as shell I tried to
> >> chown -hR * fcassia on the Desktop folder...
> >
> > You must switch the sta
Hi all,
I finally got a 64 bit processor and have had a chance to run f14, both
x32 and x64. I cannot express enough how incredible f14 is compared to
every other fedora/redhat distro that I've used before. It was a
surprise to see that x64 had fewer issues than the x32 version (though I
hav
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 02/28/2011 07:47 AM, Alain Spineux wrote:
>> So I did SUDO -i, and from root as shell I tried to
>> chown -hR * fcassia on the Desktop folder...
>
> You must switch the star and our user name
>
> chown -hR fcassia *
>
>>
You should also avoid
On Mon, 2011-02-28 at 10:19 -0700, stan wrote:
> On Mon, 28 Feb 2011 07:15:52 -0800
> "Suresh Govindachar" wrote:
>
> > Yes, instructions for creating a live CD from Windows cmd.exe
> > perhaps by invoking the stuff in live cd creator's tools/
> > directory. (There are several Unix command
On Mon, 28 Feb 2011 15:55:00 -0600
Brian Millett wrote:
> With the default k3b that now uses growisofs to burn a dvd, it fails at
> 49% every time.
Are you sure it uses growisofs? I just tried to burn a dual sided
DVD the other day with k3b-2.0.2-2.fc14.x86_64 installed, and
it screwed up complet
On Mon, 2011-02-28 at 18:32 -0300, Sebastian wrote:
> given that the EPROM is not to FCC standard, could I be putting
> other components of my computer and/or myself at any risk?
I don't think the power output ability of the device is capable of that.
It's more an issue of being an interfering nui
My system:
fedora 14, dell e6500, TSSTcorp DVD +-RW TS-U633F
With the default k3b that now uses growisofs to burn a dvd, it fails at
49% every time.
Downloaded the k3b-2.0.2-2.fc14.src.rpm, disabled the patch51 which
changes wodim to growisofs, recompiled and now I can burn a DVD iso
image.
--
On 28 February 2011 14:46, mike cloaked wrote:
> On Mon, Feb 28, 2011 at 9:24 AM, Neil Bird wrote:
>>
>> I updated from Fedora 12 to Fedora 14 over the weekend, and now I can't
>> change my pointer theme. I'm stuck using dmz-aa.
>>
>> The pointer preferences still show my custom pointer choi
OK, thanks Wey_yi for chiming in, however, even if i do get the card to work
in linux by recompiling the kernel or do use it in windows,
as you say, given that the EPROM is not to FCC standard, could I be putting
other components of my computer and/or myself at any risk?
On Mon, Feb 28, 2011 at
On Mon, Feb 28, 2011 at 12:30 PM, Bill Davidsen wrote:
> If you want cutting edge go Fedora, if you want stable go RHEL. If you have
> better things to do with your time than upgrade twice a year, RHEL and bug
> fixes
> only.
You answered the OPs question directly and much better than my reply.
On Mon, Feb 28, 2011 at 2:37 PM, Larry Vaden wrote:
> On Mon, Feb 28, 2011 at 2:35 PM, erikmccaskey64
> wrote:
>> How could I get the output where the newest file is at the top?
>
> One solution would be to awk it until the date is in the format
> Europeans prefer, namely MM DD.
That said,
On Mon, Feb 28, 2011 at 2:35 PM, erikmccaskey64 wrote:
> How could I get the output where the newest file is at the top?
One solution would be to awk it until the date is in the format
Europeans prefer, namely MM DD.
regards/va...@texoma.net
--
users mailing list
users@lists.fedoraproject.
Original:
Jan 23 2011 10:42 SOMETHING 2007.12.20.avi
Jun 26 2009 SOMETHING 2009.06.25.avi
Feb 12 2010 SOMETHING 2010.02.11.avi
Jan 29 2011 09:17 SOMETHING 2011.01.27.avi
Feb 11 2011 20:06 SOMETHING 2011.02.10.avi
Feb 27 2011 23:05 SOMETHING 2011.02.24.avi
Output:
Feb 27 2011 23:05 SOMETHING 2011.
On Mon, Feb 28, 2011 at 7:55 AM, Aaron Konstam wrote:
> I decided to try xournal. Am I correct that when you use it you are left
> with an .xoj file that can only be read and printed with xournal
Once you are done editing, you can export to a new modified pdf which
can be read by any pdf reader.
JD wrote:
> On 02/27/2011 11:38 AM, Kevin Fenzi wrote:
>> On Sun, 27 Feb 2011 11:04:50 -0800
>> JD wrote:
>>
>>> Can anyone point me to any docs or info on the
>>> process (and frequency) of updating RHEL with
>>> the bugfixes and new features added to the Fedora
>>> repos?
>> When there is a ne
On Mon, Feb 28, 2011 at 8:55 AM, Fernando Cassia wrote:
> There is a Palm Desktop for Java
> I ran it years ago under IBM OS/2...
>
> I´m not sure what export formats it has... but it´s worth a try.
Sorry I got confused with another Java-based sync util, Java Palm
Desktop http://www.ctag.de/p
Fernando Cassia gmail.com> writes:
>
> How to know on a gigabit Eth0 if a given port is working in half
> duplex, full duplex,and if it's fast ethernet or full ethernet, from
> Gnome/Fedora?
>
> If I hover over the ETH0 icon in the notification area of the Gnome
> bar I only see "Wired connecti
On 02/28/2011 10:04 AM, James McKenzie wrote:
> Agreed. If I want lid close, suspend, let me select it. If I don't,
> let me select it.
Yes. The Gnome devs have, once again, decided that the way they like to
do things is the One True Way and everybody using Gnome must do things
their way. I'
On Mon, 2011-02-28 at 06:15 -0500, Tod Thomas wrote:
> I have a old palm pilot that I really don't use but still use its
> windows client GUI. I can still sync it to the original palm pilot but
> I'd like to get the data off of that platform onto something a little
> more contemporary like Moz
On Mon, Feb 28, 2011 at 9:57 AM, Genes MailLists wrote:
> On 02/28/2011 11:45 AM, James McKenzie wrote:
>> On Sat, Feb 26, 2011 at 4:35 PM, Bill Davidsen wrote:
>>>
>>> Thanks for the prompt reply. I understand this choice came because some
>>> Apple
>>> laptops melt if you don't suspend when yo
On Mon, 2011-02-28 at 10:33 -0500, Ted Roche wrote:
> Vacuums usually kill electronics because they generate static electricity.
Well, it's always been the suggestion that it's the *moving air* that
generates static electricity, with the velocity being the major factor.
The direction shouldn't rea
On Mon, 28 Feb 2011 07:15:52 -0800
"Suresh Govindachar" wrote:
> Yes, instructions for creating a live CD from Windows cmd.exe
> perhaps by invoking the stuff in live cd creator's tools/
> directory. (There are several Unix commands and tools that
> have been ported to Windows.)
The Cyg
Ed Greshko wrote:
> On 02/27/2011 08:30 AM, Bill Davidsen wrote:
>> These people not only don't pay for good advice, they won't even take it for
>> free in many cases.
>>
> Good luck to you. No matter what direction you take, the chances are
> sometime in the future the situation will become total
On 02/28/2011 11:45 AM, James McKenzie wrote:
> On Sat, Feb 26, 2011 at 4:35 PM, Bill Davidsen wrote:
>>
>> Thanks for the prompt reply. I understand this choice came because some Apple
>> laptops melt if you don't suspend when you close the cover, but after reading
>> the article I checked the CP
On Sat, Feb 26, 2011 at 4:35 PM, Bill Davidsen wrote:
>
> Thanks for the prompt reply. I understand this choice came because some Apple
> laptops melt if you don't suspend when you close the cover, but after reading
> the article I checked the CPU temp on a few of mine, and they seem likely to
> s
On Mon, Feb 28, 2011 at 01:27:59PM -0300, Sebastian wrote:
> Thanks John for the message.
> Did Wey-yi respond to your mail John?
I saw a reply from her -- perhaps she only sent it to me.
She confirmed that the required value was as intended.
> Is the "too old" Eprom, firmware conjecture reasonab
Thanks John for the message.
Did Wey-yi respond to your mail John?
Is the "too old" Eprom, firmware conjecture reasonable, considering the card
DOES work in Windows 7 as verified?
Unfortunately swapping out the card is not feasible since it would have to
travel to Australia from Argentina and then
2011/2/28 Antonio M :
> 2011/2/28 Antonio M :
>> 2011/2/28 antonio.montagn...@alice.it :
>>> Suddenly, when I boot my laptop (That is getting IP from a DHCP), I see smb
>>> and
>>> nmb services up, but whe I log in I see that nmb is dead!!! I have to
>>> restart
>>> it manually and then my shares
On Mon, Feb 28, 2011 at 3:55 PM, Neil Bird wrote:
> Around about 28/02/11 14:46, mike cloaked typed ...
>> What I do is yum install bluecurve-cursor-theme gnome-themes-extras
>> oxygen-cursor-themes oxygen-icon-theme
>
> I have bluecurve, but it won't let me change to that either.
>
Well I have
Around about 28/02/11 14:46, mike cloaked typed ...
> What I do is yum install bluecurve-cursor-theme gnome-themes-extras
> oxygen-cursor-themes oxygen-icon-theme
I have bluecurve, but it won't let me change to that either.
--
[neil@fnx ~]# rm -f .signature
[neil@fnx ~]# ls -l .signature
ls:
On Mon, 2010-12-06 at 13:49 -0300, Michael Wiktowy wrote:
> On Mon, Dec 6, 2010 at 9:04 AM, Harish Pillay wrote:
> >> Is there any PDF modifier for linux?
> >
> > You might want to explore Xournal as well.
>
> Xournal is superb for annotating PDFs.
>
> One thing that I find with generating PDFs
On Fri, Feb 25, 2011 at 10:14:18PM -0300, Sebastian wrote:
> Thank you for those who have taken the time to suggest possible ways to get
> my card working.
> It seems I have the latest firmware, the one that came with the Fedora
> 64-bit DVD, that I downloaded from fedora ~1 week ago.
> This is the
On Fri, Feb 25, 2011 at 11:23:34PM -0300, Sebastian wrote:
> On Fri, Feb 25, 2011 at 1:06 PM, John W. Linville wrote:
> > What seems most likely is that you have an older (possibly pre-release)
> > piece of hardware that has EEPROM data on the card that the driver
> > refuses to recognize. Whethe
On Mon, Feb 28, 2011 at 10:27 AM, Tim wrote:
> Hmm, I would have thought blowing air in to be more of an issue than
> sucking air out. Blasting air in generally has a lot of force, vacuums
> only have much air force when very close to the nozzle.
Vacuums usually kill electronics because they ge
On Sun, Feb 27, 2011 at 12:52 PM, JD wrote:
> On 02/27/2011 11:38 AM, Kevin Fenzi wrote:
>> On Sun, 27 Feb 2011 11:04:50 -0800
>> JD wrote:
>>
>>> Can anyone point me to any docs or info on the
>>> process (and frequency) of updating RHEL with
>>> the bugfixes and new features added to the Fedor
On Mon, Feb 28, 2011 at 8:49 AM, Temlakos wrote:
> Where is the English-US option for default spelling dictionaries in
> Firefox and Thunderbird? (And for that matter, why don't those
> dictionaries come with the proper names of Firefox and Thunderbird
> pre-loaded?)
http://support.mozilla.com/e
On Sun, 2011-02-27 at 13:57 -0800, john wendel wrote:
> I once killed a motherboard by vaccuming out the dust. Static
> discharge from the vac brush, I think. Don't make the same mistake,
> use a blower or canned air instead.
Hmm, I would have thought blowing air in to be more of an issue than
suc
Tim:
>> Thirded... I used to find something worth reading in it, but the
>> last few editions have been completely boring.
JD:
> Actually, this more of an opportunity than a point to lament.
> If there are people who could spend the time cycles needed
> to write interesting and informative articl
Rahul Sundaram wrote:
>On 02/26/2011 10:49 AM, Suresh Govindachar wrote:
>
>> Done: https://bugzilla.redhat.com/show_bug.cgi?id=680589
>>
>> By the way, how would one do what liveusb-creator.exe does
>> manually from a command line (cmd shell)? The wiki page
>> http://fedoraprojec
Hi there
the issue is relative to the copy of a file chmod 0700 from an home dir to a
shared public location
if i use samba (windows explorer) to copy the file, the default group acl of
destination dir are correctly
applied; if i use cp command in a xterm shell, file is still 0700 and no acl is
a
On Mon, Feb 28, 2011 at 9:24 AM, Neil Bird wrote:
>
> I updated from Fedora 12 to Fedora 14 over the weekend, and now I can't
> change my pointer theme. I'm stuck using dmz-aa.
>
> The pointer preferences still show my custom pointer choice, it's just
> not being used. Well, mostly. Within
On Mon, 2011-02-28 at 06:15 -0500, Tod Thomas wrote:
> I have a old palm pilot that I really don't use but still use its
> windows client GUI. I can still sync it to the original palm pilot but
> I'd like to get the data off of that platform onto something a little
> more contemporary like Mozi
On 02/28/2011 07:08 AM, Juan Asensio Sánchez wrote:
Is there any way to obtain the users with expired/expiring password?
Hi have activated the password policy, making the password expire
after X days, and warn them after X-10 days. Now, I want to create a
cron job to send an email to users warni
Everyone:
Where is the English-US option for default spelling dictionaries in
Firefox and Thunderbird? (And for that matter, why don't those
dictionaries come with the proper names of Firefox and Thunderbird
pre-loaded?)
I have been using the spell-check system for many times. And I detect a
On Mon, Feb 28, 2011 at 11:46 AM, Fernando Cassia wrote:
> Is this normal? Fedora10 here...
>
> # users
> fcassia fcassia fcassia fcassia fcassia fcassia fcassia
You have opened 7 connections (maybe terminal) with your host,
> [root@doscabezas]# groups
> root bin daemon sys adm disk wheel
>
> So
2011/2/28 Antonio M :
> 2011/2/28 antonio.montagn...@alice.it :
>> Suddenly, when I boot my laptop (That is getting IP from a DHCP), I see smb
>> and
>> nmb services up, but whe I log in I see that nmb is dead!!! I have to restart
>> it manually and then my shares are shown
>>
>> No idea why and w
On Mon, Feb 28, 2011 at 8:15 AM, Tod Thomas wrote:
>
> Is there some sort of utility that I can use to transfer the palm pilot
> information to another platform? I've looked around and haven't found
> anything that really works well.
There is a Palm Desktop for Java
I ran it years ago under
On Mon, Feb 28, 2011 at 8:15 AM, Tod Thomas wrote:
>
> Is there some sort of utility that I can use to transfer the palm pilot
> information to another platform? I've looked around and haven't found
> anything that really works well.
http://www.jpilot.org/
I´m not sure what export formats it ha
I had this on a previous distro, so it's not specific to Fedora. I log in
and after about 60 seconds, mouse clicks no longer work. The only workaround
is to log out and log back in. Then mouse clicks work for an unlimited time.
This is an HP DV7 laptop with a Synaptics touchpad and a Logitech Marbl
I have a old palm pilot that I really don't use but still use its
windows client GUI. I can still sync it to the original palm pilot but
I'd like to get the data off of that platform onto something a little
more contemporary like Mozilla Sunbird etc.
Is there some sort of utility that I can us
On Mon, Feb 28, 2011 at 8:51 AM, Fernando Cassia wrote:
> How to know on a gigabit Eth0 if a given port is working in half
> duplex, full duplex,and if it's fast ethernet or full ethernet, from
> Gnome/Fedora?
>
> If I hover over the ETH0 icon in the notification area of the Gnome
> bar I only see
How to know on a gigabit Eth0 if a given port is working in half
duplex, full duplex,and if it's fast ethernet or full ethernet, from
Gnome/Fedora?
If I hover over the ETH0 icon in the notification area of the Gnome
bar I only see "Wired connection 'System eth0' active". Is there any
way to make i
Is this normal? Fedora10 here...
# users
fcassia fcassia fcassia fcassia fcassia fcassia fcassia
[root@doscabezas]# groups
root bin daemon sys adm disk wheel
Somehow I inardvertedly ended up with a bunch of folders owned by
root, and when I attempted to move those around from the user account
(fc
2011/2/28 antonio.montagn...@alice.it :
> Suddenly, when I boot my laptop (That is getting IP from a DHCP), I see smb
> and
> nmb services up, but whe I log in I see that nmb is dead!!! I have to restart
> it manually and then my shares are shown
>
> No idea why and what to look for
> debugging.
>
Suddenly, when I boot my laptop (That is getting IP from a DHCP), I see smb and
nmb services up, but whe I log in I see that nmb is dead!!! I have to restart
it manually and then my shares are shown
No idea why and what to look for
debugging.
--
users mailing list
users@lists.fedoraproject.org
I updated from Fedora 12 to Fedora 14 over the weekend, and now I can't
change my pointer theme. I'm stuck using dmz-aa.
The pointer preferences still show my custom pointer choice, it's just
not being used. Well, mostly. Within Firefox and Thunderbird windows, my
custom pointer is sh
On 02/26/2011 10:49 AM, Suresh Govindachar wrote:
> By the way, how would one do what liveusb-creator.exe does
> manually from a command line (cmd shell)? The wiki page
> http://fedoraproject.org/wiki/FedoraLiveCD/USBHowTo has
> command line instructions for Linux, but not for Windows.
>
On 02/28/2011 01:22 AM, JD wrote:
> Thanx a lot.
> I was hoping that the RHEL updates
> would have included the tried and true, and very stable
> mods made in the fedora releases/updates.
Sometimes they do but it is a question of whether enterprise customers
want the update vs the risk of the up
On 02/28/2011 01:09 AM, John Mellor wrote:
> Here here! FWN used to be something worth reading, but has now been
> bastardized into what looks more like an employee rule-book for a
> totally mindless organization.
If you feel strongly about it, now is a great time to step up and help
write some
72 matches
Mail list logo
