Re: [one-users] Can't access to VM through ssh

Hello Carlos, thank you for your explanation. On 07/05/2010 03:19 PM, Carlos Martín Sánchez wrote: Hello Andrea, 2010/7/2 Andrea Turli mailto:andrea.tu...@eng.it>> this public IP is one of our subnet 62.101.90.192/27 without DHCP. some network parameter

Re: [one-users] Can't access to VM through ssh

Hello Andrea, 2010/7/2 Andrea Turli > this public IP is one of our subnet 62.101.90.192/27 without DHCP. > > > some network parameters are not correct (like NETWORK; NETMASK and > BROADCAST). In fact, if I change them manually and restart the network, > everything works. > Is there any way to c

Re: [one-users] Can't access to VM through ssh

Hi Carlos, On 06/30/2010 04:37 PM, Carlos Martín Sánchez wrote: Hi again, Let's check the basics, just in case: a) The ttylinux machine you are using is the one downloaded from our site, so it is correctly contextualized. b) And you are trying to access the VM 192.168.0.6 from a machine in th

Re: [one-users] Can't access to VM through ssh

b) And you are trying to access the VM 192.168.0.6 from a machine in the same 192.168.0.X network, right? Opss ... shall I? I mean, I'm trying to access to the machine from the > opennebula cluster node which has a public IP. Is it correct? > Yes, try reaching the VM from the 192.168.0.X network

Re: [one-users] Can't access to VM through ssh

Hi, On 06/30/2010 04:37 PM, Carlos Martín Sánchez wrote: Hi again, Let's check the basics, just in case: a) The ttylinux machine you are using is the one downloaded from our site, so it is correctly contextualized. I think so, I'm following the guide here http://www.opennebula.org/documentati

Re: [one-users] Can't access to VM through ssh

Hi again, Let's check the basics, just in case: a) The ttylinux machine you are using is the one downloaded from our site, so it is correctly contextualized. b) And you are trying to access the VM 192.168.0.6 from a machine in the same 192.168.0.X network, right? You may want to try adding anothe

Re: [one-users] Can't access to VM through ssh

Hi Carlos, On 06/30/2010 04:07 PM, Carlos Martín Sánchez wrote: Hi Andrea, Did you manage to access the VM through ssh? or are you using VNC? Not yet, I can access through virt-manager or virsh to the VM but not through ssh, cause network doesn't work. If you can't ping anything from the VM,

Re: [one-users] Can't access to VM through ssh

Hi Andrea, Did you manage to access the VM through ssh? or are you using VNC? If you can't ping anything from the VM, maybe you could try adding other VMs to that private network and check if they see each other. Or just configure the VM template to attach a network interface to the public networ

Re: [one-users] Can't access to VM through ssh

Hi all, unfortunately also running the fsck on the .img didn't solve the problem. Here my situation: - 1 x frontend: ubuntu 10.04 - KVM - NFS - 1 x cluster node: ubuntu 10.04 - KVM - NFS A ttylinux VM has been started correctly on the worker node. From the front end: # onevm list ID U

Re: [one-users] Can't access to VM through ssh

hello, run the command "qemu-syetm_x86 ttylinux.img" from the ttylinux image directory..you can see a window and will start boot ttylinux... and asked password for recover from the disk failure after entering the password "password" you just run the command "fsck /dev/hda1" it will remove the error

[one-users] Can't access to VM through ssh

Dear all, I'm trying to access through ssh to my instance of ttylinux VM created following this guide http://www.opennebula.org/documentation:rel1.4:vmg The VM is running and I've this IP address (192.168.0.5) according to the "Small Network" network definition but I cannot neither ping it not