Good Day List
Hope you well.
I would like to find out if someone could assist me.
I am in the process of setting up a SIP Server hosting a few companies PBX
Functionality, but require some assistance/guidance.
What I am looking for is:
1) Support for Multiple Domains - Each Company with their o
X functions.
>
> Mark
>
> On Thu, Aug 12, 2010 at 8:48 PM, Deon Vermeulen
> wrote:
>> Good Day List
>> Hope you well.
>> I would like to find out if someone could assist me.
>> I am in the process of setting up a SIP Server hosting a few companies PBX
>
Good Day
I was wondering if someone could give me a bit of guidance.
I am installing OpenSIPS and integrating it with Asterisk.
I have a 2 TB HDDrive and would like to know what would be the best/suggested
partitioning of the HDD using Debian?
Thanks
Kind Regards
Deon Vermeulen
Brad
would you be so kind and show a sample config for how you setup the serial fork?
I have to set this up but have no idea where to start.
Some sort of template would be great just to give an idea of how this is done.
I should be able to figure out the rest as I go along.
Thanks
Kind Regard
t; destination");
> seturi("sip:$...@2.2.2.2");
> t_relay();
> exit();
> }
> if(t_check_status("480")){
> t_reply("480","Request timeout");
> exit();
> }
> if(t_check_status("404")) {
>
Hi Everyone
I've successfully installed Opensips-cp 4 and got the Statistics
monitoring to work, but I'm unable to get Monit to work.
I've been all over google and tested recommendations, but with no luck.
This is the procedure I followed to install Monit:
Step 1: Install Monit:
apt-get ins
ake
it not work even when the syntax checks out.
The test run listens on lo:2056 so beware incase of conflicts. YMMV
Hope that helps.
Dave
On Wed, Sep 8, 2010 at 1:41 AM, Deon Vermeulen > wrote:
Hi Everyone
I've successfully installed Opensips-cp 4 and got the Statistics
monitorin
Yesterday I manage to get monit, SMonitor and MI to work but as from
this morning opensips gives me a FIFO error when starting up.
This is a partial output of my current opensips.cfg file
### Global Parameters #
debug=6
log_stderror=no
log_facility=LOG_LOCAL0
### Modules Sect
fixed that it would sometimes not kill the
test opensips after running it.
I attached my fixed version in case you are interested.
On Wed, Sep 8, 2010 at 10:42 PM, Deon Vermeulen > wrote:
Thank you very much Dave.
I'll look into this and give feedback.
rega
_CONNECTOR=UNIXSOCK:/tmp/opensips.sock
# MI_CONNECTOR=UDP:192.168.2.133:8000
# MI_CONNECTOR=XMLRPC:127.0.0.1:32860
Thanks for the help.
regards
Deon
On 15 Sep 2010, at 1:48 PM, Deon Vermeulen wrote:
> Yesterday I manage to get monit, SMonitor and MI to work but as from
> this morning o
any of the above info will help.
I also see a "CRITICAL:core:yylex: cfg. parser: unexpected EOF: 2
comments open" and can't find the problem in the configuration file.
Thanks for the help.
Appreciated.
Regards
Deon
On 15 Sep 2010, at 1:54 PM, Deon Vermeulen wrote:
> I
Good Day
I am trying to setup Routing Parameters but get errors when checking
opensips config.
Can some one please point out what I'm doing wrong in my script below
or suggestions doing it differently will really be appreciated?
##
#- Group Routing Params
Just to let everyone know.
I got this resolved.
I rebuild the whole Server from scratch...
Have no idea what the problem was.
Regards
Deon
On 15 Sep 2010, at 2:03 PM, Deon Vermeulen wrote:
> I am also getting this output when checking the opensips.cfg file.
>
>
> opensips:/var/l
);\
t_reply("404", "Not Found");\
exit;\
case -2:\
sl_send_reply("405", "Method Not Allowed");\
exit;\
ources/Webinars)
> (especially the one about the opensips default script) - after that
> you
> can start playing around with the opensips Virtual Machine -
> http://www.voice-system.ro/shortcuts::opensips_livedvd
>
> Both will give you a good understanding of opensips.
>
>
> [mailto:users-boun...@lists.opensips.org
> ] Namens Deon Vermeulen
> Verzonden: dinsdag 21 september 2010 12:02
> Aan: OpenSIPS users mailling list
> Onderwerp: Re: [OpenSIPS-Users] Routing Permission errors
>
> Thank you the reply Bogdan.
> Really appreciate it.
>
> I have download
Hi All
My Network layout is as follows:
Phone (Soft/IP, etc)
(LAN - Private IPs)|
|
Firewall -> - Internet
1Mbps (idle 95% of the time)
Hi List
When I test my config script I get the below error:
Sep 29 00:50:32 [7656] CRITICAL:core:yyerror: parse error in config
file, line 347, column 9-11: syntax error
Sep 29 00:50:32 [7656] CRITICAL:core:yyerror: parse error in config
file, line 347, column 9-11:
Sep 29 00:50:32 [7656] E
y handling ---# \
if (is_method("BYE|CANCEL")) \{ \
unforce_rtp_proxy(); \
\} \
else if (is_method("INVITE")) \{ \
# Activates the RTP Proxy for the CALLEE ---# \
force_rtp_proxy(); \
switch ($retcode) {
Thanks again.
Regards
On 29 Sep 2010, at 5:24 AM, Adam Twardowski wrote:
You have an extra } on line 342
On Tue, Sep 28, 2010 at 5:07 PM, Deon Vermeulen > wrote:
Just realize I forgot to attach my config.
Thanks again for the help.
Regards
On 28 Sep 2
errors are not opensips specific, are syntax related, valid
> for any kind or programming languages.
>
> Regards,
> Bogdan
>
>
> Deon Vermeulen wrote:
>> Hi Adam
>>
>> Thanks for the help, but now I get the following errors:
>>
>> Sep 29 09:38:13 [2956
Hi
I am sure there is a way to setup "Asterisk like Context" in OpenSIPS.
I have been all over Google/OpenSIPS documentation/Building Telephony
systems with OpenSIPS 1.6 eBook, but still have no idea how to do this
or where to start.
Is there perhaps someone that could give me a 2 "Context" c
e it.
Regards
Deon
On 30 Sep 2010, at 11:58 AM, Stanisław Pitucha wrote:
On 30/09/10 10:48, Deon Vermeulen wrote:
Is there perhaps someone that could give me a 2 "Context" config
example for OpenSIPS?
It depends what you mean by a context. If you want to sort by the
source
host,
Hi Stan
Once again, thanks for the lightning fast response.
I understand that I can't just take the Asterisk Context style and
put that on OpenSIPS.
I just thought hat the concept of Contexts would make it easier to
understand what I need to achieve.
I also know about the drouting and Domain
30 Sep 2010, at 1:19 PM, Stanisław Pitucha wrote:
> On 30/09/10 11:59, Deon Vermeulen wrote:
>> Let me try and explain a scenario as brief as I possibly can.
>>
>> I have Company A (Domain A) and Company B (Domain B).
>>
>> Domain A and B should be completely Transparent
; On 30.09.2010 23:10, Deon Vermeulen wrote:
>> I'm able to setup a call between the 2 users, but the call drops
>> after
>> +-30 seconds.
>> VOICE data is sent and received between the devices while in the +-30
>> seconds call duration.
>
> 30 seco
to us...@domain.com, but not visa-versa.
When I answer the call on us...@domain.com the call does not setup but
times out with error 408 on both ends.
Regards
Deon
On 01 Oct 2010, at 8:42 AM, Raúl Alexis Betancor Santana wrote:
> On Viernes 01 Octubre 2010 06:11:48 Deon Vermeulen escribió:
>&
Hi
I've been anticipating to setup Mediaproxy for more then a week now
without any success.
I've used the following resources as guidelines, but still can't figure
out what I'm doing wrong or missing:
http://www.opensips.org/html/docs/modules/devel/mediaproxy.html
http://www.opensips.org/html/
Hi List
I'm trying to setup NAT to NOT use MediaProxy when it detects that 2
devices are behind the same NAT Device, but rather have coms go
directly between them.
At the moment I can dial between the 2 phones and answer the call.
The callee phone says "Call Established" upon answer, but the c
ss). I don't think this will work in the general case, but
> maybe you're using IP addresses as your domains?
> 4. I don't see the code that invokes route(6) -- I assume that is in
> a branch_route not the request route?
>
> Good luck,
> Kennard
>
> On Tu
(ICE, recommended),
for Bria Professional I should set "Use local IP", "(STUN) discover
from server and Select Enable ICE.
Thanks again.
I really appreciate all the help and assistance.
Best Regards
Deon
On 02 Nov 2010, at 8:15 PM, Saúl Ibarra Corretgé wrote:
> On 11/02/201
ouble firewalls. ICE
> (and yes, full ICE, not just STUN) is more robust way of avoiding
> media-relay when not needed. Of course, it has its own issues :-).
>
> Kennard
>
> On Tue, Nov 2, 2010 at 11:11 AM, Deon Vermeulen > wrote:
> Hi Kennard
>
> Thanks for the
Hi List
Anyone else able to assist me?
Really appreciate any help I can get.
Regards
Deon
On 03 Nov 2010, at 8:17 AM, Deon Vermeulen wrote:
> Morning Kennard
>
> I really appreciate your feedback.
>
> I will be serving different networks, but will have control over
>
trying to do
> > is: is your network an open or closed environment? If open
> > environment (where you cannot control/know the networks where your
> > users are) then non-ICE short-circuiting media relay will fail for
> > people behind non-hairpinning firewalls or double fi
Thank you very much for the info.
Will take a look at this.
Best Regards
On 04 Nov 2010, at 7:32 PM, osiris123d wrote:
>
> If your phone registers with the OpenSIPS proxy and has it's Public IP
> address show up in the location table then it is possible to see
> that two
> devices are on the
wrote:
>> Re: 2 UAs behind same NAT Device (Deon Vermeulen)
> How do you tell if two boxes are behind the same NAT? You could have
> the
> boxes under the same LAN but 2 separate sub-LANs, both having
> 10.1.2.3.4
> kind of IP. Or they could have the same local IP.
>
Hi Yufei
I'm keeping all of this in mind and will provide my config for my
needs once done and working.
Perhaps you can use some of the config or perhaps this config will
solve your situation.
I have to go and redo/rethink my whole strategy and then take it from
there.
So this will not be a
Contact bog...@opensips.org
We are using them.
They are the Best resource as they are the owners, developers of this project.
Regards
Deon
On Apr 6, 2011, at 5:50 PM, Jeff Matson wrote:
> We are looking to implement OpenSIPS within our hosted VOIP environment. If
> you are interested in c
38 matches
Mail list logo
