Thank you guys for hosting distributed summit this year. Kudos to Max
for taking care of video streaming.
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hi Johan,
Absolutely, You can use opensips-cp 3.0 for opensips 3.1
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hi Bill,
I don't about the rpm builds but you can access all the OpenSIPS source
code packages from here ->
https://opensips.org/pub/opensips/
And this is for 2.1.5
https://opensips.org/pub/opensips/2.1.5/
You can compile it and can use it.
Hey guys,
I was just curious that can we make OpenSIPS to register as a SIP endpoint to
VoIP provider like Twillio. We already using IP based auth in OpenSIPS to
accept calls but one of our VOIP Provider wants our OpenSIPS SBC to register
with them as a SIP trunk to get calls.
Does anyone got
Now it's working as expected. Thanks for helping.
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hey guys,
We configured the opensips server to send the logs to log facility 1
(opensips.log), it's working fine but at the same time it's also writing logs
to log facility0 (syslog).
opensips.cfg --
log_level=3
log_stderror=no
log_facility=LOG_LOCAL1
log_name="osips-1"
rsyslog.conf -
Hi Mark, If your initial goal is to get the listener IP where you
received the request then you can try these variables.
*$Ri* - reference to IP address of the interface where the request has
been received
*$Rp* - reference to the port where the message was received
Hi Mark,
If your initial goal is to get the interface IP where request is
received then you can try these variables.
*$Ri* - reference to IP address of the interface where the request has
been received
*$Rp* - reference to the port where the message was received
That's great if problem got solved. And yes you may right we need to
add active tag on 2nd opensips server too.
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hi,
Your keepalived configuration looks good. But you need to remove
set_dlg_sharing_tag("vip") form invite block on second opensips server.
Follow these steps to troubleshoot your issue -
1. Remove set_dlg_sharing_tag("vip") from OpenSIPS 2nd.
2. Before making a test call make sure
Hi,
Can you show us that how you are creating dialogs ? and where are you
setting your sharing tag, like this -
set_dlg_sharing_tag("vip");
Thank you
___
Users mailing list
Users@lists.opensips.org
Hey guys,
I am struggling to make OpenSIPS 3 work with TLS. I tried various different
ways to make this work but getting the same errors. SSL certs are generated via
let's encrypt. Here is my config for tls_mgm module -
TLS Management Module
loadmodule "tls_mgm.so"
# Server defination
Thanks for your feedback Liviu, I have fixed those mistakes.
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hey guys,
I just wrote a blog on OpenSIPS 3 installation on Debian. I hope this blog will
help newbies to get started pretty quick on OpenSIPS. Please review and comment
.
https://www.securevoip.io/2020/02/13/how-to-install-opensips-3-from-source-on-debian/
Thank
Hey guys,
We want to add presence feature in our existing openSIPS deployment, currently
we are using mid-registrar and we would like to handle BLF messages. So what
you guys recommend ? that we go for XCAP server or just relay SUBSCRIBE message
to the PBX instead of using presence server ?
Hi Alex,
You can also use Dynamic Routing Module to route your calls. You can add
regex rules and can route the call to destination gateways.
https://opensips.org/html/docs/modules/2.4.x/drouting.html
Thanks and Regards
Sharad Kumar
___
Users
Thank you guys. It's working now.
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hey guys,
I need your little help in regex, I have a regex that search the 9 Digits DID
and append 972 as a prefix. So for example -
DID - 012345678
After regex - 9720123456789
But now I want to remove the first 0 by regex so that I should get the output
like this - 97212345678
These are my
Thanks Razvan, I will do it and will let you know.
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hi folks,
I am encountering a segfault error, when I am trying to sync the load balancer
module data among all nodes in the cluster. I have 2 nodes in cluster, and I am
executing this command to reload lb module -
opensipsctl fifo cluster_broadcast_mi 1 lb_reload
After executing this command,
Hey guys,
I am trying to load call_center module on openSIPS 2.4 but getting a lot of
erros. Here is my configuration -
# B2B Module
loadmodule "b2b_entities.so"
loadmodule "b2b_logic.so"
modparam("b2b_logic", "script_scenario",
"/usr/local/etc/opensips/scenario_callcenter.xml")
# Call center
Hi Matt,
If you want to do topology hiding too in your setup, I would recommend
you, to use topology hiding module instead of using B2B_LOGIC one.
Thanks and Regards
Sharad Kumar
___
Users mailing list
Users@lists.opensips.org
Hi Diptesh,
Thank you for the valuable information. I have already set
net.ipv4.ip_nonlocal_bind =1 but still it's not working. So what I did,
I set that value and then I added one IP to listen on both openSIPS
instances.
listen:udp:10.10.10.111:5060
listen:tcp:10.10.10.111:5060
But
Hi guys,
We are trying to do dialog replication in openSIPS2.4 cluster and getting this
error -
ERROR:dialog:dlg_replicated_create: Replicated dialog doesn't match caller's
listening socket udp:10.0.0.21:5060
Both openSIPS are listening on different IP Addresses subnet and I am well
aware of
Hi guys,
We are using openSIPS for edge proxy and one of our client is sending wrong
user-agent which is not compliant with RFC.
This is the username which is being passed -
Asterisk PBX 1.8.23.0-1_centos5.go RPM by dem...@goautodial.com\r\n
Where @ is not allowed in user-agent header. We are
25 matches
Mail list logo