Hello,
I'm a real begginer in using Opensips, i've installed opensips_vm_1.7 on
vmware workstation. and i didn't make any change to the default
cnfiguration file. Opensips is running but when i try ti register a sip
phone installed on my physical machine. I've 408 request timeout or 403 no
relaying
istening in udp:172.24.0.102. Could this be the problem?
2012/3/9 SamyGo
> check with your VMware network configurations, I feel that there is no
> proper network configured on VMware
>
> On Fri, Mar 9, 2012 at 2:47 PM, azza miled wrote:
>
>> Hello,
>> I'm a
0.0.0.0:* LISTEN
1808/opensips
udp0 0 172.24.0.201:50600.0.0.0:*
1773/opensips
2012/3/9 SamyGo
> paste the output of the following commands
>
> #iptables -L
> #netstat -pln | grep opensips
>
>
>
> On Fri, Mar 9, 2012 at 3:15 PM, azza miled wrote:
>
&g
I'm sorry for copying it wrong before. This is the adress of the server(
the one I obtained when I do ifconfig). I can ping it from my physical
machine
2012/3/9 SamyGo
> Is this IP 172.24.0.201:5060 accessible from your required network !?
>
>
> On Fri, Mar 9, 2012 at 3:
I
am using a host-only network, I don't an Internet connection in the machine
running the vmware, in fact I just tryed to add this line to the config
"listen=tcp:172.24.0.201" but when I do netstat, this interface don't
appear 2012/3/9 azza miled
> I'm sorry for copy
tput log with
> debug=4 when you restart !
> what is the output of the following:
>
> #route -n
> #ifconfig
>
>
>
> On Fri, Mar 9, 2012 at 3:52 PM, azza miled wrote:
>
>>
>> I
>> am using a host-only network, I don't an Internet connection in t
utput of the following:
>>
>> #route -n
>> #ifconfig
>>
>>
>>
>> On Fri, Mar 9, 2012 at 3:52 PM, azza miled wrote:
>>
>>>
>>> I
>>> am using a host-only network, I don't an Internet connection in the
>>> machin
Hi!
I installed Opensips_vm_1.7 on vmware workstation and two sip phone on my
physical machine. I am using the original opensips.cfg, I just added the
two users on the domain test.com. Sip phones are enreigtered but when I try
to make a call, I can't even press the green button that we use for
dial
Hi
I want to configure opensips to use Oracle data base..Can any one help me (
a link of a detailed tutoriel is a good idea)...thank you :)
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
nsips.org/html/docs/modules/1.8.x/db_oracle.html
>
> Regards,
>
> Vlad Paiu
> OpenSIPS Developer
> http://www.opensips-solutions.com
>
>
> On 03/28/2012 11:54 AM, azza miled wrote:
>> Hi
>> I want to configure opensips to use Oracle data base..Can any one help
Hi!
When I try to authenticate my users, I get this error message:Registration
error: 401-Unauthorized.
in my opensips.cfg
loadmodule "db_mysql.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"mysql://opensips:opensipsrw@localhost/open
Hi!
I want to use FreeSWITCH to handle IVR for opensips' users. I have no idea
where to start. Can any one help me, especially with modifications that I
have to do in FreeSWITCH server.
Thanks :)
___
Users mailing list
Users@lists.opensips.org
http://list
Hi!
I want to route incoming calls to reach any available phone of my sip
phones (clients of my OpenSIPS server). To make you understand the purpose,
I am doing this to route calls for the available agent of a call center.
Can I use the load balancing module to do that???
Thanks a lot.
I am usin Opensips to handle incoming calls to a call center. I want that
an incoming call reach any available Opensips' client. Can any one help
please, any ideas will be such a help: module to use, functions, any thig
cause I am really lost. Thanks a lot:)
gt;
> Regards,
>
> Vlad Paiu
> OpenSIPS Developerhttp://www.opensips-solutions.com
>
>
> On 04/18/2012 06:34 PM, azza miled wrote:
>
> I am usin Opensips to handle incoming calls to a call center. I want that
> an incoming call reach any available Opensips' c
eSwitch PBX style
> programs.
>
>
>
>
>
> On , azza miled wrote:
> > I am usin Opensips to handle incoming calls to a call center. I want
> that an incoming call reach any available Opensips' client. Can any one
> help please, any ideas will be such a help
449251.n2.nabble.com/Hunt-Group-with-Opensips-td5459644.html
>
>
> http://opensips-open-sip-server.1449251.n2.nabble.com/Ring-Group-Memory-Hunt-with-serial-forking-td2659604.html
>
>
>
> On , azza miled wrote:
> > Exactly,I am searching for Hunt groups. Do you think that
Hi!
I want to do load balancing with sopthphones as destiantions. in the
function load_balance(grp,resources[,alg]), I didn't know what to put in
the resources parameter. Any help, please??
___
Users mailing list
Users@lists.opensips.org
http://lists.open
I am trying to do load balancig with softphones as register.
I ad to softphones to resources table with resource field set to cc=1
(refered to current call), then I add this to opensips.cfg
if ($rU=~"^1002") {
load_balance("1","cc");
}
1002 is a registred user. then when I dialed 1002 from a regist
I want to define the state of my opensips users to identifie who is
occupied, who is idle and since when. I have to do this in a short time,
this is why I am asking for your help, any information (module, procedure)
will be very helpful.
Thank you.
___
Us
rio you are trying to implement, are you
> trying to have multiple servers as load-balanced REGISTRARS for your
> softphones !? Please explain your full scenario again.
>
> Regards,
> Sammy
>
>
> On Thu, May 10, 2012 at 2:40 PM, azza miled wrote:
>
>> I am trying to do
Hi!
This is my first project on OpenSIPS.I am trying to route my calls en
function of the callee profile. The problem is that profiles are stored on
an external Oracle data base. Is it possible to consult the Oracle data
base, extract the profile on the calle from it and routing the call based
on t
lad Paiu
> OpenSIPS Developerhttp://www.opensips-solutions.com
>
>
> On 05/17/2012 06:44 AM, azza miled wrote:Hello,
>
> Just to clear some things up, if you leave the second server offline and
> only start it after the active is down, then the ongoing dialogs will be
> aut
Hi!
My opensips server is related to a local mysql database. I want to relay it
to an external oracle data base. I do the following, I load the db_oracle
module and in opensips.cfg modparam("avpops", "db_url",
"oracle://username:password@hostname/dbname). The strange thing is that
when I do restart
Hi!
I want to manage queuing call with opensips. I was googling and I found
that OpenSIPS is not meant to do this. I have to manage a call center using
OpenSIPS so it's very important to do queuing. If any one have any idea: a
start point, a module, a discussion forum that could help, I will be ver
his. If you insist on using a proxy for
> feature server functions, you may want to look at SEMS
>
> -Brett
>
> On May 23, 2012, at 8:48 AM, azza miled wrote:
>
> Hi!
> I want to manage queuing call with opensips. I was googling and I found
> that OpenSIPS is not mea
I want to make my OpenSIPS server listen to another sip server's flow. I
uncomment the port=5060 in the opensips.cfg so, the server can listen to
all ports but this didn't work and I don't receive any trafic from the
other server. In fact I have the IP adress and the port of the other
server. How
port the other sip server is using and configure the
> same port. Are you doing port mirroring? Use tcpdump command see if the
> traffic is coming to the server.
>
> Regards,
> Ali
>
> On Tue, May 29, 2012 at 10:57 AM, azza miled wrote:
>
>> I want to make my OpenSIPS
ne it with ngrep or
> tcpdump and then run opensips on that port. What's the ngrep command you
> are running?
>
> Regards,
> Ali
>
>
> On Tue, May 29, 2012 at 11:51 AM, azza miled wrote:
>
>> First of all,thanks for the response. I made my opensips li
29 matches
Mail list logo