the two servers are running in separate physical machines. They are connected via an ethernet network. the ngrep command I'am using is "ngrep -p -q -W byline host IP_address_of_the_other_server". I don't have any port mirroring setup. the problem that I don't get that well. The mechanism of the port mirroring must be installed in the other server, right???
2012/5/29 Ali Pey <ali...@gmail.com> > Are they running on two separate physical servers? or are you running the > opensips server on the same machine? > If they are on separate servers, what's your network connectivity? do you > have proper port mirroring setup? without port mirroring, you will not be > able to see any traffic unless you find a hub instead of a switch - most > hubs are actually switches and they send the traffic the one port only. > You need to first fix you network setup and examine it with ngrep or > tcpdump and then run opensips on that port. What's the ngrep command you > are running? > > Regards, > Ali > > > On Tue, May 29, 2012 at 11:51 AM, azza miled <azza.mi...@gmail.com> wrote: > >> First of all,thanks for the response. I made my opensips listen to the >> same port of the other server >> >> listen=udp:my_IP_Addres:7003 >> listen=tcp:my_IP_Addres:7003 >> >> I restarted OpenSIPS after that, and I used ngrep to detect traffic. But my >> server still does not detect any traffic coming from the other server. >> >> 2012/5/29 Ali Pey <ali...@gmail.com> >> >>> if you uncomment the port, it will listen to the default port which is >>> 5060. You can never have opensips to listen to all ports. You always need >>> to listen to a port number. You can bind it to multiple ip addresses though. >>> >>> You need to know what port the other sip server is using and configure >>> the same port. Are you doing port mirroring? Use tcpdump command see if the >>> traffic is coming to the server. >>> >>> Regards, >>> Ali >>> >>> On Tue, May 29, 2012 at 10:57 AM, azza miled <azza.mi...@gmail.com>wrote: >>> >>>> I want to make my OpenSIPS server listen to another sip server's flow. >>>> I uncomment the port=5060 in the opensips.cfg so, the server can listen to >>>> all ports but this didn't work and I don't receive any trafic from the >>>> other server. In fact I have the IP adress and the port of the other >>>> server. How this can be useful??Can any one help, please?? >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@lists.opensips.org >>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>>> >>>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users@lists.opensips.org >>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> > > _______________________________________________ > Users mailing list > Users@lists.opensips.org > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > >
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users