Hi,
I have been trying to bring Strongswan 4.5.3 to Android 2.2.1 and goldfish
2.6.9. So far I have successfully integrated.
Now I can start the emulator, verifying the Kernel and Android built. I can use
adb to start charon. I have a couple of questions:
1. When I ran charon in adb shell,
Hello Zhen,
> I have been trying to bring Strongswan 4.5.3 to Android
If possible, you should update to 4.6.1 as there are several Android
related improvements included in that release.
> 1. When I ran charon in adb shell, it started, but said: "android plugin
> failed to load, can't open androi
I created using
ipsec pki.
Is that because the way I created the CA cert? or something is missing in the
Android charon?
thanks!
-zhen
From: Tobias Brunner
To: zhen chen
Cc: "users@lists.strongswan.org"
Sent: Tuesday, November 15, 2011 9:52
>
>
> ----
> *From:* Tobias Brunner
> *To:* zhen chen
> *Cc:* "users@lists.strongswan.org"
> *Sent:* Tuesday, November 15, 2011 9:52 AM
> *Subject:* Re: [strongSwan] Android/Stongswan Integration
&
( 800): 08[ENC] parsed IKE_AUTH response 1 [ N(AUTH_FAILED) ]
I/charon ( 800): 08[IKE] received AUTHENTICATION_FAILED notify error
____________
From: Andreas Steffen
To: zhen chen
Cc: Tobias Brunner ; "users@lists.strongswan.org"
Sent: Sunday, Novembe
: [strongSwan] Android/Stongswan Integration
Hi Andreas,
I loaded the strongswan.conf to the android emulator,the Android is able to
load the CA cert successfully.
Thanks!
Now I started from the Android emulator and tried to add the IKEv2 IPSec
tunnel. I entered the name, address of the GW
tarter and stroke
which allows you to use an ipsec.conf based configuration, instead of
using the frontend patch."
From: Tobias Brunner
To: zhen chen
Cc: "users@lists.strongswan.org"
Sent: Tuesday, November 15, 2011 9:52 AM
Subject: Re: [stro
Hi Zhen,
> If I used 4.6.1, is there any special configuration I need to enable to
> build the starter and stroke when I build the Android?
Have a look at the top Android.mk. There you can uncomment the
strongswan_BUILD_STARTER line to enable the build of starter and stroke.
> I assume I wouldn
Subject: Re: [strongSwan] Android/Stongswan Integration
Hi Zhen,
> If I used 4.6.1, is there any special configuration I need to enable to
> build the starter and stroke when I build the Android?
Have a look at the top Android.mk. There you can uncomment the
strongswan_BUILD_STARTER line
> 1. Doesn't seem that Charon loads the the ipsec.conf file.
What makes you say so? Do you get any errors? Where did you put the
file? Can you verify that it's there when you log into the emulator
with 'adb shell'? And is that path equal to what you configured in the
top Android.mk file as st
Brunner
To: zhen chen
Cc: "users@lists.strongswan.org"
Sent: Tuesday, November 22, 2011 8:07 AM
Subject: Re: [strongSwan] Android/Stongswan Integration
> 1. Doesn't seem that Charon loads the the ipsec.conf file.
What makes you say so? Do you get any errors? Where did you
11 matches
Mail list logo