Hi,
Thorsten Schifferdecker wrote:
> @jan: how get your IPv6 connectivity ?
I've static setup on HW node:
iface eth0 inet6 static
post-up /sbin/sysctl -w "net.ipv6.conf.eth0.autoconf=0"
post-up /sbin/sysctl -w "net.ipv6.conf.all.forwarding=1"
address 2001:718:1:e::23:3254
Hi,
@jan: how get your IPv6 connectivity ?
IPv6 traceroute from noc.sixxs.net @ SixXS NOC, AS12871 to
2001:718:1:e::23:3257 :
Hop Node Loss% Sent Last Avg Best Worst
StDev ASNOrganisation
1. 2001:838:1:1::1 0.0% 50.4 0.4 0.
Hello Benoit,
> Temporarily giving up messing with veth devices (forgot dhcpd server for
> now), I concentrated on setting up a basic VS with both IPv4 and IPv6
> addresses, using standard venet device.
>
> [...]
> Result:
>
> - IPv4 VS works as expected (ping succeeds from hardware node, extern
Hi,
for official IPv6 i'm useing sixxs as tunnelbroker,
these steps i've done connect a Debian OpenVZ system
to a IPv6 Network for the VE with a venet0 interface:
1) Setup an IPv6 Tunnel (-> https://noc.sixxs.net/ )
Relevant IPv6 settings in "/etc/network/interfaces"
[...]
# device: sixxs ipv6 t
Temporarily giving up messing with veth devices (forgot dhcpd server for
now), I concentrated on setting up a basic VS with both IPv4 and IPv6
addresses, using standard venet device.
I'm using Debian Etch hardware node with debian.systs.org packages.
So I did:
- install packages and reboot as
Hi there ...
We have a beowulf cluster here. The master holds all data
and distributes work to eight compute nodes. The system
is running well but as debian old stable is used I can't
install some newer software.
I thought about running a kind of application server in
a VE. So people using blead
On 24 January 2008 13:38:13 Benoit Branciard wrote:
> Hello,
>
> sorry for the noise, but I'm starting with openVZ and have some trouble
> setting up things.
>
> I plan to virtualize a server which hosts (among other network services)
> a dhcpd server. As stated from various docs, I need to setup a
Hello,
sorry for the noise, but I'm starting with openVZ and have some trouble
setting up things.
I plan to virtualize a server which hosts (among other network services)
a dhcpd server. As stated from various docs, I need to setup a veth
device to account for dhcpd broadcasts. But this serv