That's why I recommend squid. Without that you should make port forwarding
on your network's gateway (router). But Spice consoles working on the same
port and you can't make port forwarding to few different hosts on the same
port.
I gave you a complete working solution. If you don't like to use VP
April is here, and residents of the Eastern Seaboard in the US are feeling a
rising hope that Winter is finally on its way out. In the oVirt community, work
on oVirt 3.6 is ramping up, even as more people in the virtualization sector
are talking us up.
Software
You call all of that configuration for accessing consoles, easy? :) :)
Engine should be able to set up the proxy automatically... I haven't
used squid, so I have to look in more detail at the configuration that
you've provided.
I did find some other functionality which would have been much
This is not the problem because I can hit F12, choose the disk, and the
machine boots fine.
I *had* set the machine to PXE boot before hard disk, but after undoing
that, the configuration seems to have held.
Jason.
On 04/02/2015 02:05 PM, shimano wrote:
Make sure that KickStart installed corre
Make sure that KickStart installed correct boot sector (on correct
partition). For example boot Hiren's CD on VM and check that Grub trying to
boot correct /boot partition and your /boot partition is active (bootable).
2015-04-02 18:28 GMT+02:00 Jason Keltz :
> I have kickstarted my first CentOS
You can use Spice Proxy. The easiest way is to run proxy on Squid. I
recommend connect via VPN.
Here is a part of my Squid's configuration to connect Spice consoles from
VPN 10.25.0.0/16 and LAN 192.168.0.0/16 to oVirt's hosts on 192.168.2.0/24:
acl manager proto cache_object
acl localhost src 12
I have kickstarted my first CentOS 6 host under ovirt. When it boots,
the VM tries to PXE boot again rather than going to the hard disk.
If I look under "Boot Options" in my VM, there's only:
* First Device: Hard Disk
* Second Device: [None]
If I "Enable boot menu" then I can Hit F12 whe
I'm trying to figure out the most reasonable method for me to access the
console on my ovirt installation.
Each node has ovirtmgmt, storage, and external network connectivity.
The standalone engine host has ovirtmgmt, and external network.
I connect to engine via the external network, right click
On 31/03/15 15:34, Juan Hernández wrote:
> Hello,
>
> Does anyone have a good reason to not remove the YAML support from the
> RESTAPI? As far as I know it isn't used or tested in any reasonable way,
> so I would like to remove it completely for 3.6. If anyone is using it
> and can't move to JSO
- Original Message -
> Hi
>
> Nightly builds of ovirt node iso for 3.5 and master branches are now
> available on jenkins.
> http://jenkins.ovirt.org/user/tlitovsk/my-views/view/Node/
>
> They are also available as RPMs for use from your engine.
> And those RPM will be available on http:/
Hi
Nightly builds of ovirt node iso for 3.5 and master branches are now available
on jenkins.
http://jenkins.ovirt.org/user/tlitovsk/my-views/view/Node/
They are also available as RPMs for use from your engine.
And those RPM will be available on http://resources.ovirt.org/pub/ repositories
Bes
Thank you kindly! My first few test exports from KVM & imports into oVirt
worked smoothly.
> On Apr 2, 2015, at 2:19 AM, Alexandr Krivulya wrote:
>
> 01.04.2015 23:08, Bellamy, Peter пишет:
>> Is it necessary to export VMs that are straight libvirt/KVM (raw) images
>> before importing them i
Hi,
Have you any news to tell me ?
Thanks
Alain
Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin 75006 PARIS
www.unicef.fr
-Message d'origine-
De : Adam Litke [mailto:ali...@red
- Original Message -
> From: "suvra roy"
> To: users@ovirt.org
> Sent: Thursday, April 2, 2015 4:39:26 AM
> Subject: [ovirt-users] ovirt 3.1 to 3.2 up-gradation problem
>
> after upgradation ovirt engine 3.1 to 3.2 all of my vdsm node goes to
> non responding.
> Error message showing
> Th
Hi everyone...
I have a little strange situation... I'm trying to add Posix Compliant FS
Storage Domain based on MooseFS. As You can read below, oVirt is mounting
it correctly but it cannot make a Storage Domain. Anybody could help?
// Quick investigation
Is /posix mounted?
root@host008:/
Hi Michael,
Please find the full details :-
On Thu, Apr 2, 2015 at 3:02 PM, Punit Dambiwal wrote:
> Hi
Hi Michael,
Sorry for the late reply...i just overlooked this mail because i received
it in junk box...
---
[root@cpu01 ~]# virsh -r dumpxml ef48648ac67f72e9fe79d5069444f7f5 | grep
outbound
[root@cpu01 ~]#
-
Thanks,
Punit
On Mon, Feb 16, 2015 at 3:33 PM
17 matches
Mail list logo