Hello Team Ovirt,
We are running Ovirt3.8 version in our prod, we want to upgrade to 3.8 to
4.2.
At present we have 2 (hyp A & hyp B)physical host ovirt 3.8 is running with
self hosted engine with data domain and iso one cluster and data center.
What we were thing do this migration in following
Here is the steps I follow:
First make sure you backup your hosted engine...then proceed as below:
on hosted engine console
# yum update -y
put host in global maintenance
# hosted-engine --set-maintenance --mode=global
run engine-setup on hosted engine
reboot hosted engine
# hosted-engine
It looks like there are several different pages describing the update process
and I’m not sure which ones in particular apply in this case. I’ve got a
cluster with 6 hosts, 3 of which can run the hosted engine.
Would this be the correct procedure?
Hi Bryan,
i expect a hardware problem.
Have all your servers ECC ram ?
In the past I had a PC (without ECC RAM) and without ovirt,
which regularly produced a defective data block when transferring
an 8GB gzip file with rsync. The error position in file was randomly, but
the defective stored
Hi Bernhard,
Perfect hint - domain is up and running now.
Thank you!
Regards, Robert
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt
Hi Robert,
Am 20.07.2018 um 16:40 schrieb teh...@take3.ro:
[...]
Discovery of ISCSI target is working but after logging in to the target no LUNs
are found or displayed, so i cant finish the procedure.
On the SPM i see an ISCSI session, and LUN 1 is attached as /dev/sdc.
The ISCSI system is a
Hello all,
i try to create a new data domain on ISCSI storage following this documentation:
https://www.ovirt.org/documentation/admin-guide/chap-Storage/
Discovery of ISCSI target is working but after logging in to the target no LUNs
are found or displayed, so i cant finish the procedure.
On
Hello,
I'm working on development of script to backup and restore ovirt VMs.
I saw some examples from sdk (https://github.com/oVirt/ovirt-engine-sdk
/tree/master/sdk/examples) to backup and restore VMs, but for backup
ovf VM i'm using the vm.initialization.configuration.data and this ovf
it
Hi,
Over the past few weeks i have had a number of Windows VM Disk start showing
up as corrupted. I Attempt to boot into recover mode and run the normal
recover tools (chkdsk, sfc /scannow, etc.) Unable to repair with status 50.
Looking through Ovirt, i do not see any thing in the logs. VM
Hi,
Still the same error after installing ansible 2.5.5 and repo:
1. Hosts: localhost
Play: Determine openshift_version to configure on first master
Task: openshift_version : fail
Message: Package 'atomic-openshift-3.9*' not found
# yum search atomic-openshift
...
Hi,
Just re-probing (peer probe) all missing host from the ovhost3 host this
the Job, Now i can continue with the upgrade.
Thanks again for your help this is such a nice peace of software.
On Fri, Jul 20, 2018 at 6:06 AM, carl langlois
wrote:
> Yes host3 is hosting the arbiter bricks. Does
Yes host3 is hosting the arbiter bricks. Does this make any differrence?
All host ares part of the same cluster in Ovirt. But only 3 of them are
part a the gluster pool.
I understand that all hosts will be aprt of the same gluster cluster.
Now i do i fix this situation?. It seem that i cannot add
On Fri, Jul 20, 2018 at 5:28 AM wrote:
> We have more USB devices redir (There are 8),But oVirt supports only 6.
> How should I configure it.
>
> /etc/engine-config/engine-config.properties
> NumberOfUSBSlots.validValues=0..6
>
> This 0..6 modify 0..8
>
> engine-config -s NumberOfUSBSlots=8
>
13 matches
Mail list logo