- Original Message -
From: Ricardo Esteves ricardo.m.este...@gmail.com
To: Federico Simoncelli fsimo...@redhat.com
Cc: users@ovirt.org
Sent: Wednesday, October 8, 2014 1:32:51 AM
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
Hi, here it goes:
ethtool -i
@ovirt.org
Sent: Wednesday, October 8, 2014 1:32:51 AM
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
Hi, here it goes:
ethtool -i eth3
driver: bnx2
version: 2.2.4g
firmware-version: bc 5.2.3
bus-info: :06:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom
...@gmail.com
To: Federico Simoncelli fsimo...@redhat.com
Cc: users@ovirt.org
Sent: Wednesday, October 8, 2014 1:32:51 AM
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
Hi, here it goes:
ethtool -i eth3
driver: bnx2
version: 2.2.4g
firmware-version: bc 5.2.3
bus-info: :06
- Original Message -
From: "Federico Simoncelli" fsimo...@redhat.com
To: "Ricardo Esteves" ricardo.m.este...@gmail.com
Cc: users@ovirt.org
Sent: Wednesday, May 14, 2014 3:47:58 PM
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom -
- Original Message -
From: Ricardo Esteves ricardo.m.este...@gmail.com
To: Federico Simoncelli fsimo...@redhat.com
Cc: users@ovirt.org
Sent: Tuesday, October 7, 2014 8:44:19 PM
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
cat /var/lib/iscsi/ifaces/eth3
:
- Original Message -
From: Ricardo Esteves ricardo.m.este...@gmail.com
To: Federico Simoncelli fsimo...@redhat.com
Cc: users@ovirt.org
Sent: Tuesday, October 7, 2014 8:44:19 PM
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
cat /var/lib/iscsi/ifaces/eth3
# BEGIN RECORD
- Original Message -
From: Ricardo Esteves ricardo.m.este...@gmail.com
To: Federico Simoncelli fsimo...@redhat.com
Cc: users@ovirt.org
Sent: Wednesday, May 14, 2014 1:45:53 AM
Subject: RE: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
In attachment follows the defaults
- Original Message -
From: Federico Simoncelli fsimo...@redhat.com
To: Ricardo Esteves ricardo.m.este...@gmail.com
Cc: users@ovirt.org
Sent: Wednesday, May 14, 2014 3:47:58 PM
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
- Original Message
- Original Message -
From: Ricardo Esteves ricardo.m.este...@gmail.com
To: users@ovirt.org
Sent: Friday, April 11, 2014 1:07:31 AM
Subject: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
Hi,
I've put my host on maintenance, then i configured iscsi offload for my
In attachment follows the defaults and the modified versions of the nodes files.
-Original Message-
From: Federico Simoncelli [mailto:fsimo...@redhat.com]
Sent: terça-feira, 13 de Maio de 2014 08:58
To: Ricardo Esteves
Cc: users@ovirt.org
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI
In attachment follows the defaults and the modified versions of the nodes files.
-Original Message-
From: Federico Simoncelli [mailto:fsimo...@redhat.com]
Sent: terça-feira, 13 de Maio de 2014 08:58
To: Ricardo Esteves
Cc: users@ovirt.org
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI
-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
On 04/10/2014 07:07 PM, Ricardo Esteves wrote:
Hi,
I've put my host on maintenance, then i configured iscsi offload for
my broadcom cards changing target's file's (192.168.12.2,3260 and
192.168.12.4,3260) in my node
iqn.1986-03
On 04/10/2014 07:07 PM, Ricardo Esteves wrote:
Hi,
I've put my host on maintenance, then i configured iscsi offload for my
broadcom cards changing target's file's (192.168.12.2,3260 and
192.168.12.4,3260) in my node
iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface
- Original Message -
From: Karli Sjöberg karli.sjob...@slu.se
To: Ofri Masad oma...@redhat.com
Cc: users@ovirt.org
Sent: Monday, August 19, 2013 8:26:06 AM
Subject: Re: [Users] oVirt-3.2 users creating snapshots fail
sön 2013-08-18 klockan 03:01 -0400 skrev Ofri Masad:
Hi Karli
.
/Karli
thanks
ofri
- Original Message -
From: Karli Sjöberg karli.sjob...@slu.semailto:karli.sjob...@slu.se
To: Ofri Masad oma...@redhat.commailto:oma...@redhat.com
Cc: users@ovirt.orgmailto:users@ovirt.org
Sent: Monday, August 19, 2013 8:26:06 AM
Subject: Re: [Users] oVirt-3.2
] oVirt-3.2 users creating snapshots fail
Well, well, looki here, the issue is reported by at least two more users:
http://lists.ovirt.org/pipermail/users/2013-June/014813.html
Reported fixed already for 3.3... Whereas I´ve just been able to upgrade to
3.2 after five months of bang-head-against
: [Users] oVirt-3.2 users creating snapshots fail
Well, well, looki here, the issue is reported by at least two more users:
http://lists.ovirt.org/pipermail/users/2013-June/014813.html
Reported fixed already for 3.3... Whereas I´ve just been able to upgrade to
3.2 after five months of bang-head
Hi!
After upgrading from oVirt-3.1 to oVirt-3.2, users´s ability to create
snapshots has disappeared. The only way to give users permission to take
snapshots that I´ve found so far is to give them DataCenterAdmin or Super
User in either System or DataCenter, and any other given Role is met by
Well, well, looki here, the issue is reported by at least two more users:
http://lists.ovirt.org/pipermail/users/2013-June/014813.html
Reported fixed already for 3.3... Whereas I´ve just been able to upgrade to 3.2
after five months of bang-head-against-wall:ing:(
I would very much like to see
On 7-8-2013 18:20, Ricardo Esteves wrote:
Good afternoon,
Hi, when o try to clone vm from snapshot, it opens the window but it doesn't
does anything else.
Is a known bug of 3.2.1. version 3.2.2 fixes this.
Joop
___
Users mailing list
On 07/29/2013 06:06 PM, Nicholas Kesick wrote:
Date: Mon, 29 Jul 2013 09:56:30 +0200
From: mklet...@redhat.com
To: dan...@redhat.com
CC: cybertimber2...@hotmail.com; users@ovirt.org
Subject: Re: [Users] oVirt 3.2 - Migration failed due to error: migrateerr
On 07/27/2013 09:50 PM, Dan
On 07/27/2013 09:50 PM, Dan Kenigsberg wrote:
On Fri, Jul 26, 2013 at 02:03:28PM -0400, Nicholas Kesick wrote:
Date: Fri, 26 Jul 2013 05:52:44 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: dan...@redhat.com; users@ovirt.org
Subject: Re: [Users] oVirt 3.2 - Migration failed
Date: Mon, 29 Jul 2013 09:56:30 +0200
From: mklet...@redhat.com
To: dan...@redhat.com
CC: cybertimber2...@hotmail.com; users@ovirt.org
Subject: Re: [Users] oVirt 3.2 - Migration failed due to error: migrateerr
On 07/27/2013 09:50 PM, Dan Kenigsberg wrote:
On Fri, Jul 26, 2013 at 02:03
On Fri, Jul 26, 2013 at 02:03:28PM -0400, Nicholas Kesick wrote:
Date: Fri, 26 Jul 2013 05:52:44 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: dan...@redhat.com; users@ovirt.org
Subject: Re: [Users] oVirt 3.2 - Migration failed due to error: migrateerr
On 07/26
On 07/26/2013 05:40 AM, Nicholas Kesick wrote:
Replies inline.
Date: Thu, 25 Jul 2013 22:27:17 +0300
From: dan...@redhat.com
To: cybertimber2...@hotmail.com
CC: users@ovirt.org
Subject: Re: [Users] oVirt 3.2 - Migration failed due to error:
migrateerr
On Thu, Jul 25, 2013 at 11:54
Date: Fri, 26 Jul 2013 05:52:44 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: dan...@redhat.com; users@ovirt.org
Subject: Re: [Users] oVirt 3.2 - Migration failed due to error: migrateerr
On 07/26/2013 05:40 AM, Nicholas Kesick wrote:
Replies inline.
Date: Thu
On 07/25/2013 06:54 PM, Nicholas Kesick wrote:
When I try to migrate a VM, any VM, between my two hosts, I receive an
error that says Migration failed due to error: migrateerr. Looking in
the log I don't see any thing that jumps out other than the final message
VDSGenericException:
On Thu, Jul 25, 2013 at 11:54:40AM -0400, Nicholas Kesick wrote:
When I try to migrate a VM, any VM, between my two hosts, I receive an error
that says Migration failed due to error: migrateerr. Looking in the log I
don't see any thing that jumps out other than the final message
New VDSM package is available for testing.
Changes
==
- service: make iscsid a systemd dependency (BZ#981906)
- vdsm.spec: update python-pthreading
Where
===
- oVirt testing update REPO (thanks mburns!)
- For koji users:
f19 -
Hello :)
Now I can say, that problem is not only in ovirt so firstly I would like to try
some tricks and tried to send report asap.
Thanks
From: Mark Wu [mailto:wu...@linux.vnet.ibm.com]
Sent: Wednesday, April 10, 2013 3:33 AM
To: Kralicek, Martin
Cc: users@ovirt.org
Subject: Re: [Users] oVirt
Hello,
Has somebody experience with Dell MD3600i and oVirt 3.2.1?
Host and oVirt are deployed on Fedora 18.
My infrastructure contains: 2 x powerconnect 6224 and this storage with two
controllers
Both switch are in stack mode and storage is connect with four 10Gb ports in
same subnet (is better
martin.krali...@accenture.com wrote:
Hello,
Has somebody experience with Dell MD3600i and oVirt 3.2.1?
Host and oVirt are deployed on Fedora 18.
My infrastructure contains: 2 x powerconnect 6224 and this storage
with two controllers
Both switch are in stack mode and storage is connect
On 04/10/2013 02:31 AM, martin.krali...@accenture.com wrote:
Hello,
Has somebody experience with Dell MD3600i and oVirt 3.2.1?
Host and oVirt are deployed on Fedora 18.
My infrastructure contains: 2 x powerconnect 6224 and this storage
with two controllers
Both switch are in stack mode
-
From: Winfried de Heiden w...@dds.nl
To: users@ovirt.org
Sent: Thursday, March 21, 2013 10:14:04 AM
Subject: Re: [Users] ovirt 3.2 - high multicast packet loss
So far no reactie about the multicast packet loss..
I bumbed into this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=880035
So far no reactie about the multicast packet loss..
I bumbed into this bug: https://bugzilla.redhat.com/show_bug.cgi?id=880035
This looks the same as the problems I am suffering using oVirt 3.2:
heavy multicast packet loss after some time.
This the bug affect oVirt 3.2 ovirt-node
Michael Tsirkin (Thanks!) proposes to try the following:
try disabling multicast snooping in the bridge
Could you give it a shot?
- Original Message -
From: Winfried de Heiden w...@dds.nl
To: users@ovirt.org
Sent: Thursday, March 21, 2013 10:14:04 AM
Subject: Re: [Users] ovirt 3.2
disabling multicast snooping in the bridge
Could you give it a shot?
- Original Message -
From: Winfried de Heiden w...@dds.nl
To: users@ovirt.org
Sent: Thursday, March 21, 2013 10:14:04 AM
Subject: Re: [Users] ovirt 3.2 - high multicast packet loss
So far no reactie about the multicast
Hi all,
Playing around with Red Hat Clustering, it turns out I have a hughe
multicast packet loss: (Centos 6.4 - x86_64 with all updates)
omping 192.168.1.211 192.168.1.212 -c500 (node1)
omping 192.168.1.212 192.168.1.211 -c500(node2)
will give almost 50% loss!
192.168.1.211 : unicast,
Same for Debian 6 (x86_64); 47% packet loss:
ssmping -c 500 192.168.1.234
--- 192.168.1.234 statistics ---
500 packets transmitted, time 51 ms
unicast:
500 packets received, 0% packet loss
rtt min/avg/max/std-dev = 0.352/0.675/0.863/0.072 ms
multicast:
265 packets received, 47%
On 03/16/2013 01:22 AM, Gianluca Cecchi wrote:
On Sat, Mar 16, 2013 at 12:02 AM, Gianluca Cecchi wrote:
Hello,
lastly with 3.2 and 3.2.1 on F18 hosts I'm not able to attach cd
At the window, after selecting iso and click OK I get:
Error while executing action Change CD: Drive image file
On Mon, Mar 11, 2013 at 12:34:51PM +0200, Dan Kenigsberg wrote:
On Mon, Mar 11, 2013 at 06:09:56AM -0400, Balamurugan Arumugam wrote:
Rob,
It seems that a bug in vdsm code is hiding the real issue.
Could you do a
sed -i s/ParseError/ElementTree.ParseError
Baron aba...@redhat.com
Sent: Wednesday, March 13, 2013 9:03:39 PM
Subject: Re: [Users] oVirt 3.2 on CentOS with Gluster 3.3
On Mon, Mar 11, 2013 at 12:34:51PM +0200, Dan Kenigsberg wrote:
On Mon, Mar 11, 2013 at 06:09:56AM -0400, Balamurugan Arumugam
wrote:
Rob,
It seems
...@zwissler.org, users@ovirt.org, a...@ovirt.org,
Aravinda VK avish...@redhat.com, Ayal
Baron aba...@redhat.com
Sent: Wednesday, March 13, 2013 9:03:39 PM
Subject: Re: [Users] oVirt 3.2 on CentOS with Gluster 3.3
On Mon, Mar 11, 2013 at 12:34:51PM +0200, Dan Kenigsberg wrote:
On Mon, Mar 11, 2013
Hi Alex
On Sun, Mar 10, 2013 at 4:26 PM, Alex Leonhardt alex.t...@gmail.com
wrote:
Hi Alex,
Regarding the dependencies - libvirtd would not start w/o having
messagebus / avahi-daemon installed running, however, it doesnt
seem to come up as an dependency when installing libvirtd (otherwise
Hi Alex / all -
Anyone experienced the same when installing 3.2 all-in-one on centos 6.3
? I really need this working ...
Thanks
Alex
On 03/10/2013 02:26 PM, Alex Leonhardt wrote:
Hi Alex,
Regarding the dependencies - libvirtd would not start w/o having
messagebus / avahi-daemon
On Fri 08 Mar 2013 04:33:53 PM IST, Alex Leonhardt wrote:
Also, the there seem to be missing some dependencies for
- messagebus (service not enabled/started/installed)
- avahi-daemon (wasnt installed, had to install and start / enable)
else
libvirtd will not start and the setup will fail.
Hi Alex,
Regarding the dependencies - libvirtd would not start w/o having
messagebus / avahi-daemon installed running, however, it doesnt seem
to come up as an dependency when installing libvirtd (otherwise it would
have been installed previously) ?
I read this solution on some blog page,
On Wed, Mar 06, 2013 at 02:34:10PM +0530, Balamurugan Arumugam wrote:
On 03/06/2013 01:20 PM, Dan Kenigsberg wrote:
On Tue, Mar 05, 2013 at 10:08:48AM -0800, Rob Zwissler wrote:
On Mon, Mar 4, 2013 at 11:46 PM, Dan Kenigsberg dan...@redhat.com wrote:
Rob,
It seems that a bug in vdsm code is
Hi,
The setup keeps failing at waitforhostup with :
Installing:
AIO: Validating CPU Compatibility... [ DONE ]
AIO: Adding firewall rules... [ DONE ]
Configuring oVirt Engine... [ DONE ]
And here from when I tried to use localhost as the host / fqdn :
Installing:
AIO: Validating CPU Compatibility... [ DONE ]
AIO: Adding firewall rules... [ DONE ]
Configuring oVirt Engine... [
Also, the there seem to be missing some dependencies for
- messagebus (service not enabled/started/installed)
- avahi-daemon (wasnt installed, had to install and start / enable)
else
libvirtd will not start and the setup will fail.
On 8 March 2013 14:30, Alex Leonhardt alex.t...@gmail.com
- Original Message -
From: Yuriy Demchenko demchenko...@gmail.com
To: Antoni Segura Puimedon asegu...@redhat.com
Cc: oVirt Mailing List users@ovirt.org
Sent: Thursday, March 7, 2013 7:54:52 AM
Subject: Re: [Users] ovirt 3.2 networking setup problems
Thanks! that helped
Great
Hi Rob,
On 03/06/2013 05:59 PM, Rob Zwissler wrote:
On one hand I like oVirt, I think you guys have done a good job with
this, and it is free software so I don't want to complain.
But on the other hand, if you release a major/stable release (ie:
oVirt 3.2), but it relies on a major/critical
On 03/07/2013 04:36 PM, Dave Neary wrote:
Hi Rob,
On 03/06/2013 05:59 PM, Rob Zwissler wrote:
On one hand I like oVirt, I think you guys have done a good job with
this, and it is free software so I don't want to complain.
But on the other hand, if you release a major/stable release (ie:
oVirt
On 03/05/2013 06:08 AM, Rob Zwissler wrote:
Running CentOS 6.3 with the following VDSM packages from dre's repo:
vdsm-xmlrpc-4.10.3-0.30.19.el6.noarch
vdsm-gluster-4.10.3-0.30.19.el6.noarch
vdsm-python-4.10.3-0.30.19.el6.x86_64
vdsm-4.10.3-0.30.19.el6.x86_64
vdsm-cli-4.10.3-0.30.19.el6.noarch
On 03/05/2013 01:16 PM, Dan Kenigsberg wrote:
On Mon, Mar 04, 2013 at 04:38:50PM -0800, Rob Zwissler wrote:
Running CentOS 6.3 with the following VDSM packages from dre's repo:
vdsm-xmlrpc-4.10.3-0.30.19.el6.noarch
vdsm-gluster-4.10.3-0.30.19.el6.noarch
vdsm-python-4.10.3-0.30.19.el6.x86_64
On 03/06/2013 01:20 PM, Dan Kenigsberg wrote:
On Tue, Mar 05, 2013 at 10:08:48AM -0800, Rob Zwissler wrote:
On Mon, Mar 4, 2013 at 11:46 PM, Dan Kenigsberg dan...@redhat.com wrote:
Rob,
It seems that a bug in vdsm code is hiding the real issue.
Could you do a
sed -i
On Wed, Mar 06, 2013 at 02:04:29PM +0530, Shireesh Anjal wrote:
On 03/05/2013 06:08 AM, Rob Zwissler wrote:
Running CentOS 6.3 with the following VDSM packages from dre's repo:
vdsm-xmlrpc-4.10.3-0.30.19.el6.noarch
vdsm-gluster-4.10.3-0.30.19.el6.noarch
vdsm-python-4.10.3-0.30.19.el6.x86_64
Hi,
Sent a patch to handle ParseError attribute issue. vdsm still depends on
newer(3.4) version of glusterfs, but Python ParseError is fixed.
http://gerrit.ovirt.org/#/c/12752/
--
regards
Aravinda
On 03/06/2013 01:20 PM, Dan Kenigsberg wrote:
On Tue, Mar 05, 2013 at 10:08:48AM -0800, Rob
you want to create.
It would also be helpful to see the contents of doing
vdsClient -s 0 getVdsCaps
Best,
Toni
- Original Message -
From: Yuriy Demchenko demchenko...@gmail.com
To: users users@ovirt.org
Sent: Wednesday, March 6, 2013 12:17:28 PM
Subject: Re: [Users] ovirt 3.2
On Wed, Mar 6, 2013 at 12:34 AM, Shireesh Anjal san...@redhat.com wrote:
oVirt 3.2 needs a newer (3.4.0) version of glusterfs, which is currently in
alpha and hence not available in stable repositories.
http://bits.gluster.org/pub/gluster/glusterfs/3.4.0alpha/
This issue has been reported
I've been having trouble since beta where on occasion when running the setup,
it would hang at configuring firewall, even if I leave it for hours. Tonight I
decided to rebuild my VM (in virtualbox, for running the webadmin). I started
by installing Fedora 18 x86_64 from DVD with minimal
On 03/06/2013 10:29 PM, Rob Zwissler wrote:
On Wed, Mar 6, 2013 at 12:34 AM, Shireesh Anjal san...@redhat.com wrote:
oVirt 3.2 needs a newer (3.4.0) version of glusterfs, which is currently in
alpha and hence not available in stable repositories.
Hi,
This is a bug[1].
Alon
[1] https://bugzilla.redhat.com/show_bug.cgi?id=904153
- Original Message -
From: Nicholas Kesick cybertimber2...@hotmail.com
To: oVirt Mailing List users@ovirt.org
Sent: Thursday, March 7, 2013 3:24:18 AM
Subject: [Users] Ovirt 3.2 Setup Firewalld
Thanks! that helped
i've managed to add another bond via 'echo +bondN
/sys/class/net/bonding_masters'
output from commands you asked:
# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:7681c664f86a'}], 'FC': [{'wwpn':
'200190b11cac1b09',
On Thu, Feb 28, 2013 at 11:47 AM, noc wrote:
I'm also running 3.2 stable on F18 and can delete snapshots but as Gianluca
can't clone. Get the same blank window. Saw the fix but since its a
java.class change would need a rebuild of 3.2
Any idea when a wrap up of several bugs found and fixed
On Mon, Mar 4, 2013 at 11:46 PM, Dan Kenigsberg dan...@redhat.com wrote:
Rob,
It seems that a bug in vdsm code is hiding the real issue.
Could you do a
sed -i s/ParseError/ElementTree.ParseError /usr/share/vdsm/gluster/cli.py
restart vdsmd, and retry?
Bala, would you send a patch
On Tue, Mar 05, 2013 at 10:08:48AM -0800, Rob Zwissler wrote:
On Mon, Mar 4, 2013 at 11:46 PM, Dan Kenigsberg dan...@redhat.com wrote:
Rob,
It seems that a bug in vdsm code is hiding the real issue.
Could you do a
sed -i s/ParseError/ElementTree.ParseError
Running CentOS 6.3 with the following VDSM packages from dre's repo:
vdsm-xmlrpc-4.10.3-0.30.19.el6.noarch
vdsm-gluster-4.10.3-0.30.19.el6.noarch
vdsm-python-4.10.3-0.30.19.el6.x86_64
vdsm-4.10.3-0.30.19.el6.x86_64
vdsm-cli-4.10.3-0.30.19.el6.noarch
And the following gluster packages from the
On Mon, Mar 04, 2013 at 04:38:50PM -0800, Rob Zwissler wrote:
Running CentOS 6.3 with the following VDSM packages from dre's repo:
vdsm-xmlrpc-4.10.3-0.30.19.el6.noarch
vdsm-gluster-4.10.3-0.30.19.el6.noarch
vdsm-python-4.10.3-0.30.19.el6.x86_64
vdsm-4.10.3-0.30.19.el6.x86_64
On Wed, Feb 27, 2013 at 1:26 PM, Gianluca Cecchi wrote:
I have not the system with me now but I'm going to provide screenshots
this evening
It is my @HOME environment that consists on one fedora 18 system with
all-in-one 3.2
I only have one WIndows XP VM on it
Possibly the problem is due to
On 28-2-2013 11:44, Gianluca Cecchi wrote:
On Wed, Feb 27, 2013 at 1:26 PM, Gianluca Cecchi wrote:
I have not the system with me now but I'm going to provide screenshots
this evening
It is my @HOME environment that consists on one fedora 18 system with
all-in-one 3.2
I only have one WIndows XP
Subject: Re: [Users] oVirt 3.2: impossiible to delete a snapshot?
On 28-2-2013 11:44, Gianluca Cecchi wrote:
On Wed, Feb 27, 2013 at 1:26 PM, Gianluca Cecchi wrote:
I have not the system with me now but I'm going to provide
screenshots
this evening
It is my @HOME environment
Hi All,
I have this same issue on Pfsense (FreeBSD) and even a fresh Ubuntu
installation.
I have installed Ubuntu to see if it was really an issue with the nics or the
routing on Pfsense. On 3.1 this was working, I'm sure.
I have one Ubuntu box running as VM that is connected to the
Message -
From: Gianluca Cecchi gianluca.cec...@gmail.com
To: users users@ovirt.org
Sent: Wednesday, February 27, 2013 9:13:21 AM
Subject: [Users] oVirt 3.2: impossiible to delete a snapshot?
oVirt 3.2 with node f18 and engine another f18 and ovirt stable repo.
After I create
On Wed, Feb 27, 2013 at 11:16:53AM +, YamakasY wrote:
Hi All,
I have this same issue on Pfsense (FreeBSD) and even a fresh Ubuntu
installation.
I have installed Ubuntu to see if it was really an issue with the nics or the
routing on Pfsense. On 3.1 this was working, I'm sure.
I
On Wed, Feb 27, 2013 at 12:48 PM, Liron Aravot wrote:
Hi Gianluca,
what you describe is a bit odd to me, as the GUI should block you from
selecting the active snapshot and select remove - I tried to reproduce on 3.2
and had no success.
Could you please attach a screenshot and the engine
On Thu, Feb 14, 2013 at 10:44 AM, Gianluca Cecchi wrote:
Hello,
I'm testing a WIndows XP vm with native usb redirection and oVirt 3.2 beta
- when I'm in full screen of my windows XP VM, I plug an usb key into
client and I get (from my client OS) the message
Privileges are required for low
Hi,
Gianluca Cecchi píše v St 27. 02. 2013 v 14:14 +0100:
On Thu, Feb 14, 2013 at 10:44 AM, Gianluca Cecchi wrote:
Hello,
I'm testing a WIndows XP vm with native usb redirection and oVirt 3.2 beta
- when I'm in full screen of my windows XP VM, I plug an usb key into
client and I get
On Wed, Feb 27, 2013 at 2:42 PM, David Jaša wrote:
Currently on my fedora 17 client the file contains what below; how is
it supposed to be changed?
To allow redirection without any prompts to user that is currently
logged in to local session.
You wouldn't believe it, but I thought the same
Hi,
I'm testing ovirt 3.2 on centos 6.3 (from dreyou repo) and have a
problems setting up networks:
1.
- clean install of ovirt-engine, added a host (6 NICs, only 1 configured
with static ip before adding it to ovirt)
- set up bonding for ovirtmgmt from 2 NICs - em1+em2
- set up 2 additional
i've made some additional research on problem #1:
it seems that /usr/share/vdsm/configNetwork.py treats gateway=null
value as true, so setting the error flag
in _addNetworkValidation method there's a check at line 813:
if netmask or gateway:
raise
On Tue, Feb 26, 2013 at 03:25:13PM +0400, Yuriy Demchenko wrote:
i've made some additional research on problem #1:
it seems that /usr/share/vdsm/configNetwork.py treats gateway=null
value as true, so setting the error flag
in _addNetworkValidation method there's a check at line 813:
Tried to revert that patch - and it helped. So it seems the problem is
because that patch...
Thanks for help!
one less mystery to solve :)
Yuriy Demchenko
On 02/26/2013 04:16 PM, Dan Kenigsberg wrote:
On Tue, Feb 26, 2013 at 03:25:13PM +0400, Yuriy Demchenko wrote:
i've made some additional
oVirt 3.2 with node f18 and engine another f18 and ovirt stable repo.
After I create a snapshot of a powered off win xp VM, I then select
the snapshot and select delete
Are you sure you want to delete snapshot from Wed Feb 27 07:56:23
GMT+100 2013 with description 'test'?
ok
Error:
winxp:
...@redhat.com
Sent: Wednesday 20th February 2013 11:52
To: René Koch r.k...@ovido.at
Cc: Jean-Francois Saucier jsauc...@gmail.com; ovirt-users users@ovirt.org
Subject: Re: [Users] oVirt 3.2 and Solaris 10 guests
On Thu, Feb 14, 2013 at 05:25:47PM +0100, René Koch (ovido) wrote:
On Thu, 2013-02
On Sun, Feb 24, 2013 at 07:18:46PM +0100, René Koch wrote:
Thanks a lot for your feedback.
I'll try to play around with qemu options next week and try to find out which
setting causes this issue.
What's the best way for changing this options - using hook scripts I guess...
I'm told that
On Thu, Feb 21, 2013 at 7:48 PM, Gianluca Cecchi wrote:
I reconnect today to update to 3.2 final and I see that while wxp and
f18 are running, w7 VM had the same shutdown problem about 1,5
hours after booting
Hey,
I just read on rhevm 3.1 power user portal manual at page 18 that for
On Sat, Feb 23, 2013 at 6:11 PM, Gianluca Cecchi wrote:
Hey,
I just read on rhevm 3.1 power user portal manual at page 18 that for
win 7 VMs you have to disable power savings, otherwise the VM after
about an hour will be suspended so I went setting power manager to
high perfomance and
Hello,
I did a fresh install with 3.2 GA release and since i had problems with
ovirt-node, i decided to install a minimum fedora 18.
When i tried to add that node on the webadmin interface, i got this error:
Host xx installation failed. Unexpected connection termination.
I have this
Hello,
I have f18 engine server + another f18 node with 3.2 final.
I have a win7 vm *32bit) that repeatedly goes blue screen after a
couple of hours...
qemu options are :
qemu 8067 1 17 17:16 ?00:03:44 /usr/bin/qemu-kvm
-name w7 -S -M pc-0.14 -cpu Opteron_G2 -enable-kvm -m 1024
This is a really great program to debug Blue Screens just FYI. Its a lot
easier to use than Microsoft's tools.
http://www.majorgeeks.com/BlueScreenView_d6200.html
On Thu, Feb 21, 2013 at 11:41 AM, Gianluca Cecchi gianluca.cec...@gmail.com
wrote:
Hello,
I have f18 engine server + another
On Thu, Feb 21, 2013 at 5:48 PM, Chris Noffsinger wrote:
This is a really great program to debug Blue Screens just FYI. Its a lot
easier to use than Microsoft's tools.
http://www.majorgeeks.com/BlueScreenView_d6200.html
Thanks! I'll check
It is the first win7 VM on final 3.2, while on
On Thu, Feb 14, 2013 at 05:25:47PM +0100, René Koch (ovido) wrote:
On Thu, 2013-02-14 at 11:22 -0500, Jean-Francois Saucier wrote:
On Thu, Feb 14, 2013 at 11:21 AM, Jiri Belka jbe...@redhat.com
wrote:
On Thu, 14 Feb 2013 10:49:13 -0500
Jean-Francois Saucier
Hi all!
Today I installed the new oVirt 3.2 on CentOS 6.3 using www.dreyou.org
repository and I liked so much. But, I'm having problems setting
networks into physical interfaces of the hosts. On my production
environment oVirt 3.1, I have several networks in my eth1 interface, but
in the new
On Wed, Feb 20, 2013 at 01:52:10PM -0300, Eduardo Ramos wrote:
Hi all!
Today I installed the new oVirt 3.2 on CentOS 6.3 using
www.dreyou.org repository and I liked so much. But, I'm having
problems setting networks into physical interfaces of the hosts. On
my production environment oVirt
Hello,
Since 3.2 is GA, i installed from scratch my lab. I configured oVirt
management (fedora 18) and downloaded the ovirt-node-iso-2.6.0 in order to
install a node. I booted up my server from that iso, but i had no installer
window. It booted, did a check and only showed up a terminal for
Am Dienstag, den 19.02.2013, 14:05 + schrieb Josué Delgado:
Since 3.2 is GA, i installed from scratch my lab. I configured oVirt
management (fedora 18) and downloaded the ovirt-node-iso-2.6.0 in
order to install a node. I booted up my server from that iso, but i
had no installer window.
Hi Josué,
On 02/19/2013 09:05 AM, Josué Delgado wrote:
Hello,
Since 3.2 is GA, i installed from scratch my lab. I configured oVirt
management (fedora 18) and downloaded the ovirt-node-iso-2.6.0 in order
to install a node. I booted up my server from that iso, but i had no
installer window. It
On 02/16/2013 11:15 AM, Dan Kenigsberg wrote:
On Thu, Feb 14, 2013 at 03:10:37PM -0500, Mike Burns wrote:
The oVirt Team is pleased to announce that oVirt 3.2 is now available.
Yay! thanks for your tremdendous work!
I just have a feeling that if a user tends to make his nfs storage disappear
1 - 100 of 147 matches
Mail list logo