Hi,
It was indeed NetApp, and as you say I can remember something like it
but I'm not 200% sure.
For some host that I wasn't able to remove I needed hosted-engine
--reinitialize-lockspace indeed, figured that out.
dd over the same went well, didn't see anyone complaining about that either.
On Thu, Jul 21, 2016 at 9:56 PM, Matt . wrote:
> OK, it seems that a snapshot was having the files but linux didn't saw
> a change between the images as the size was still the same.
What kind of snapshot?
AFAIR from old days with netapp, snapshots on netapp expose the
OK, it seems that a snapshot was having the files but linux didn't saw
a change between the images as the size was still the same.
I'm going to dd back :)
2016-07-21 20:04 GMT+02:00 Matt . :
> OK, it seems that my config volume for the hosted engine is empty, I
> cannot
OK, it seems that my config volume for the hosted engine is empty, I
cannot tar anything out of it and I'm quite sure it has been empty for
ever as I got some strange warning every time.
Is there a way to recover that from files ? Backups/snapshots are empty so...
2016-07-21 13:43 GMT+02:00
On Thu, Jul 21, 2016 at 12:38 PM, Matt . wrote:
> The deploy went OK from the GUI but it's still not "active" as Hosted
> engine Host. The install also wen very fast so it looked like it
> didn't do anything witl the deploy setting in the GUI @ the hosted
> engine tab.
The deploy went OK from the GUI but it's still not "active" as Hosted
engine Host. The install also wen very fast so it looked like it
didn't do anything witl the deploy setting in the GUI @ the hosted
engine tab.
Or should I re-deploy again on the commandline after adding the host
through the
On Thu, Jul 21, 2016 at 12:28 PM, Matt . wrote:
> No problem I checked it out and applied it, no solution it seems.
Do you mean that it's still referring to your initial gateway or that
the deploy failed?
> 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi
No problem I checked it out and applied it, no solution it seems.
2016-07-21 12:14 GMT+02:00 Simone Tiraboschi :
> On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote:
>> OK, I did a deploy from the engine and the Hosted is "Not Active" and
>
> Yes, sorry,
On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote:
> OK, I did a deploy from the engine and the Hosted is "Not Active" and
Yes, sorry, I forgot to mention that.
We have an open bug about re-activating an hosted-engine host from the
engine:
OK, I did a deploy from the engine and the Hosted is "Not Active" and
Engine HA is empty on 4.0.1
2016-07-21 11:58 GMT+02:00 Matt . :
> True, but you can up an IP on any device in that case because you know
> what you are doing.
>
> I think that this can be finetuned, or
True, but you can up an IP on any device in that case because you know
what you are doing.
I think that this can be finetuned, or at least multiple IPs would be
nice as I now need to add one IP from my vrrp setup, so if there is a
failover or I need to take down the second switch I'm also
On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote:
> OK, I will check this laster on, as I was having issues with the
> deploy from the GUI before as nothing really happened, I thought it
> was a bug on the first 4.0 release ?
>
> I think this should be investigated, the
OK, I will check this laster on, as I was having issues with the
deploy from the GUI before as nothing really happened, I thought it
was a bug on the first 4.0 release ?
I think this should be investigated, the whole deployment as it would
be good to have the possibility to list some GW's in case
On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote:
> OK, I already thought that but where is this saved as I don't have any
> rights as root to the ha_agent folder on the HE storage ?
It's not a folder: it's a tar file directly saved over a VDSM volume.
Editing it's a bit
OK, I already thought that but where is this saved as I don't have any
rights as root to the ha_agent folder on the HE storage ?
In worst case scenario, how would i be able to deploy a new hosted
engine from a hosted engine ? This sounds undoable to me and also
unwanted as the HE is OK so far.
On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote:
> Even when I change that on each host before I do a new deploy it still
> uses the old GW address.
If you deploy additional hosts with the CLI utility, each new host
will be deployed consuming the answerfile generated by the
Even when I change that on each host before I do a new deploy it still
uses the old GW address.
2016-07-21 9:24 GMT+02:00 Simone Tiraboschi :
> On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote:
>> OK, I tried to edit the answerfiles on the other hosts
On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote:
> OK, I tried to edit the answerfiles on the other hosts to use another
> IP but it doesn't ping and still uses the old GW address.
>
> Any idea ?
The gateway address is saved under
OK, I tried to edit the answerfiles on the other hosts to use another
IP but it doesn't ping and still uses the old GW address.
Any idea ?
2016-07-20 22:27 GMT+02:00 Matt . :
> Maybe it's a good idea to be able to add multiple addresses it should
> ping in order of
Maybe it's a good idea to be able to add multiple addresses it should
ping in order of response.
2016-07-20 22:13 GMT+02:00 Sandro Bonazzola :
> Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto:
>>
>> Hi,
>>
>> I'm trying to add a host to a HE
Hi,
Can I change that in some file ? on the HE storage ?
2016-07-20 22:09 GMT+02:00 Yedidyah Bar David :
> On Wed, Jul 20, 2016 at 11:05 PM, Matt . wrote:
>> Hi,
>>
>> I'm trying to add a host to a HE installation but my gateway is not
>> pingable. It's
Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto:
>
> Hi,
>
> I'm trying to add a host to a HE installation but my gateway is not
> pingable. It's a floating IP which is usable but not pingable in this
> case.
>
> During the first install of the HE I could give any IP to ping
On Wed, Jul 20, 2016 at 11:05 PM, Matt . wrote:
> Hi,
>
> I'm trying to add a host to a HE installation but my gateway is not
> pingable. It's a floating IP which is usable but not pingable in this
> case.
>
> During the first install of the HE I could give any IP to ping
Hi,
I'm trying to add a host to a HE installation but my gateway is not
pingable. It's a floating IP which is usable but not pingable in this
case.
During the first install of the HE I could give any IP to ping and I
used a source IP for the floating GW address.
What can I do to get around this
24 matches
Mail list logo