Hi Marcus,
Yes its true I couldn' t make much progress on this. Not able to find time as
I have a full time job. If I remember correctly, you mentioned that no-one has
implemented audio control loop within GNU Radio. And you were suggesting to
write it for ALSA and not with JACK.
May I know
Snehasish,
you're far too unspecific. What does "using a RFNOC block" mean? Which
block? Whose block is that? What's the block's ID, is it correctly set?
Does it come with a working block control class? Does the block work in
test benches?
Best regards,
Marcus
On 09/19/2017 01:18 AM,
Hi Rini,
you can use both TX chains with different signals, of course! In fact,
you can't use them with the same signal at all; you'd need to send the
same signal to the USRP twice if you wanted to have the same waveform on
both channels.
> This would mean creating two USRP devices on 2
Try using the --source argument to test_pps_input, specifying "mimo" for
the mimo-connected unit.
Device addressing is "addressed" here:
https://files.ettus.com/manual/page_usrp2.html#usrp2_
You should probably also investigate using integer_n tuning, which will
definitely improve
Hi Rensi:
Well it looks like your device is being found. You should be able to run
uhd_fft as such:
uhd_fft -f 10350
This will centre the display on 103.5 MHz. If you have FM band broadcasters in
your region then you should see spikes on the fft display.
Give this a try and let
Good day
We are currently using an Ettus B210 board to
transmit a pulse waveform from a single Tx channel. I know it is
possible to use both Tx channels on the board to transmit a waveform.
What I would like to know is if it is possible to transmit 2 different
waveforms from the 2 Tx
Hello
While using a RFNOC block I am getting the following error:
[INFO] [UHDlinux; GNU C++ version 4.8.4; Boost_105400;
UHD_4.0.0.rfnoc-devel-369-g1908672f]
[INFO] [NIRIO] rpc_client stopping...
[INFO] [NIRIO] rpc_client stopped.
[INFO] [NIRIO] rpc_client stopping...
[INFO] [NIRIO]
Have been getting help on the Discuss-gnuradio site but I think, recent
investigations indicate this forum might be a better place to raise my further
questions.
I have 2 N200r4s each with an SBXv3. The unit with address 192.168.10.2 has an
O/B GPSDO and both units are connected by a MIMO
