On 30.12.2012 10:15, cedric.dew...@telfort.nl wrote:
Please send me a proper patch if you have any success with this.
Klaus
Hi Klaus,
I have not yet tested this, but the below code should work. I assume the
receiver has a snr of 0x to 0x00ff based on the following datapoints:
0x0080
On Sun, Dec 30, 2012 at 10:41:48AM +0100, Klaus Schmidinger wrote:
On 30.12.2012 10:15, cedric.dew...@telfort.nl wrote:
Please send me a proper patch if you have any success with this.
Klaus
Hi Klaus,
I have not yet tested this, but the below code should work. I assume the
Hi All,
I use an USB DVB-T receiver. This works ok, but the snr meter at the bottom
of the screen is never filled more than a few pixels, no matter how good
the signal is. The problem with this receiver is that the snr figure never
goes above 0x00d0. Is there a way to adjust the scaling of the
On 04.12.2012 20:35, cedric.dew...@telfort.nl wrote:
Hi All,
I use an USB DVB-T receiver. This works ok, but the snr meter at the bottom
of the screen is never filled more than a few pixels, no matter how good
the signal is. The problem with this receiver is that the snr figure never
goes above
On Tue, Dec 4, 2012 at 1:40 PM, Klaus Schmidinger
klaus.schmidin...@tvdr.de wrote:
It's a real pitty that the DVB drivers don't provide a standardized way of
getting signal strength and quality. They all deliver some bogus values
in various different ranges, which are pretty useless to
