Yes, my point exactly. I think an email to the developer is in order.
- Original Message -
From: "John Diakogeorgiou"
To:
Sent: Sunday, April 21, 2013 10:23 PM
Subject: Re: StandScan Pro is broken.
I have one of the newer versions and am not very impressed. For one
thing
Olver
- Original Message -
From: "John Diakogeorgiou"
To:
Sent: Sunday, April 21, 2013 9:23 PM
Subject: Re: StandScan Pro is broken.
I have one of the newer versions and am not very impressed. For one
thing the wire on the 9v batter pack looks like its going to come off
ver
groups.com] On
>> Behalf
>> Of Annie Skov Nielsen
>> Sent: Saturday, April 20, 2013 5:09 PM
>> To: viphone@googlegroups.com
>> Subject: Re: StandScan Pro is broken.
>>
>> Hi Mich.
>>
>> What about assembling it again with a battery in it, that is my
> From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
> Of Annie Skov Nielsen
> Sent: Saturday, April 20, 2013 5:09 PM
> To: viphone@googlegroups.com
> Subject: Re: StandScan Pro is broken.
>
> Hi Mich.
>
> What about assembling it again with
inal Message-
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
Of Annie Skov Nielsen
Sent: Saturday, April 20, 2013 5:09 PM
To: viphone@googlegroups.com
Subject: Re: StandScan Pro is broken.
Hi Mich.
What about assembling it again with a battery in it, that is my new pro
did it.
> from Mich.
> - Original Message - From: "Sandratomkins"
>
> To:
> Sent: Saturday, April 20, 2013 5:02 AM
> Subject: Re: StandScan Pro is broken.
>
>
> Hi Annie,
>
> I have mine in front of me,
> If you hold it with
On 20 Apr 2013, at 03:26, Mich wrote:
Hi I think there is a screw that you need to un screw to oapen up the
battery holder. from Mich.
- Original Message - From: "Annie Skov Nielsen"
To:
Sent: Friday, April 19, 2013 10:06 PM
Subject: Re: StandScan Pro is broken.
Hi again
Hi.
In fact I had to screw out a screw a little one, ok I did not have the right
screwdriver, so I used my kitchen knife, not good to the knife and the screw,
but it came of, and I could suddenly open the box. I was happy and ran into
town to get a 9V battery. I have tried to put the battery in
I Judy put my thumb through the top of my 9 volt holder
Jerry Doody
jerrydood...@gmail.com
Sent from my iPhone
On Apr 20, 2013, at 3:54 AM, Anne Robertson wrote:
Hello Annie,
To open the 9 V battery holder, place your thumb on the top surface with the
cable towards your wrist and slide it tow
one
>>>
>>> On 20 Apr 2013, at 03:26, Mich wrote:
>>>
>>>> Hi I think there is a screw that you need to un screw to oapen up the
>>>> battery holder. from Mich.
>>>> - Original Message - From: "Annie Skov Nielsen"
&g
t;> Sent from my iPhone
>>
>> On 20 Apr 2013, at 03:26, Mich wrote:
>>
>>> Hi I think there is a screw that you need to un screw to oapen up the
>>> battery holder. from Mich.
>>> - Original Message - From: "Annie Skov Nielsen
out this.
>
>Sandy.
>
> Sent from my iPhone
>
> On 20 Apr 2013, at 03:26, Mich wrote:
>
>> Hi I think there is a screw that you need to un screw to oapen up the
>> battery holder. from Mich.
>> - Original Message - From: "Annie Skov Nielsen&
>Sandy.
>
> Sent from my iPhone
>
> On 20 Apr 2013, at 03:26, Mich wrote:
>
>> Hi I think there is a screw that you need to un screw to oapen up the
>> battery holder. from Mich.
>> - Original Message - From: "Annie Skov Nielsen&
2013, at 03:26, Mich wrote:
> Hi I think there is a screw that you need to un screw to oapen up the battery
> holder. from Mich.
> - Original Message - From: "Annie Skov Nielsen"
>
> To:
> Sent: Friday, April 19, 2013 10:06 PM
> Subject: Re: StandS
Hello Annie,
I can move mine quite easily but you do have to press down as well as sliding
the top.
Cheers,
Anne
On 20 Apr 2013, at 10:49, Annie Skov Nielsen wrote:
> Hi.
>
> It will simply not move anywhere, it was what I first tried.
>
> Do you have to have extreme strong fingers?
>
>
Hallo again Annie,
I strongly suspect that it is the connection between the cable and the
lights themselves as mine too is iffy.
As I am also awaiting a replacement for the same reason, i just asked my
practical partner to take a good look at what is happening.
These are his findin
Hi.
It will simply not move anywhere, it was what I first tried.
Do you have to have extreme strong fingers?
Cheers Annie.
On Apr 20, 2013, at 9:54 AM, Anne Robertson wrote:
> Hello Annie,
>
> To open the 9 V battery holder, place your thumb on the top surface with the
> cable towards your w
Annie,
After such a short time, I think you should contact the StandScan people
and tell them. The contact between the cable and the lights themselves is
delicate and needs strengthening, in my opinion.
Meanwhile, if scanning text, try text grabber and turn on the flash, it is
one of t
Hello Annie,
To open the 9 V battery holder, place your thumb on the top surface with the
cable towards your wrist and slide it towards the cable. There is a sliding
switch on the under side of the holder to switch it on and off.
Cheers,
Anne
On 20 Apr 2013, at 04:06, Annie Skov Nielsen wro
Hi I think there is a screw that you need to un screw to oapen up the
battery holder. from Mich.
- Original Message -
From: "Annie Skov Nielsen"
To:
Sent: Friday, April 19, 2013 10:06 PM
Subject: Re: StandScan Pro is broken.
Hi again.
How do you open up the battery hold
19, 2013 3:21 PM
> To: viphone@googlegroups.com
> Subject: StandScan Pro is broken.
>
> Hi all.
>
> Ok I should have bought an extra standscan pro at once when I got mine.
> Today I needed to scan some barcodes, but it did not work. I am sure that
> the connection to the
phone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
Of Annie Skov Nielsen
Sent: Friday, April 19, 2013 3:21 PM
To: viphone@googlegroups.com
Subject: StandScan Pro is broken.
Hi all.
Ok I should have bought an extra standscan pro at once when I got mine.
Today I needed to scan some barcodes, but i
Hi Eileen.
Great idea, I have been looking for a lightdetector, because I forget to turn
off the lights, and it can be an expensive thing to do.
Thank you again. I will try if I can figure something out.
Warm regards Annie.
On Apr 20, 2013, at 2:10 AM, Eileens Misrahi wrote:
> This is jus a t
This is jus a thought. Do you have an app "Light Detector." If you are totally
blind; this app could give you feedback if any light is being produced. I have
this on my iPhone4. I also have a light detector on my qstantd a lone color
identifier that gives me audio feedback. Give it a try. It may
Hi.
Yes I have contacted Harry. The problem is that I need sighted assistance to
figure out what exact is wrong, is it the adapter or the lights, and nobody has
time for that at the moment. My 12V battery holder is very late in the post.
The sad thing is that I am sure, that I will need a new s
Actually, my stand scan showed up with a cut wire. This meant that I could not
connect it and get any output from the lights. I did email Harry and he is
sending me a replacement without the accessories of course. I am waiting out
arrival, so I would encourage you to do the same thing.
Sent fro
adapter. the first one sent was damaged
> in the mail.
>
> Harry was very helpful when I explained the problem.
>
> Crystal
>
> From: Annie Skov Nielsen
> Sent: Friday, April 19, 2013 3:21 PM
> To: viphone@googlegroups.com
> Subject: StandScan Pro is broken.
&g
problem.
Crystal
From: Annie Skov Nielsen
Sent: Friday, April 19, 2013 3:21 PM
To: viphone@googlegroups.com
Subject: StandScan Pro is broken.
Hi all.
Ok I should have bought an extra standscan pro at once when I got mine. Today I
needed to scan some barcodes, but it did not work. I am sure that
Hi all.
Ok I should have bought an extra standscan pro at once when I got mine. Today I
needed to scan some barcodes, but it did not work. I am sure that the
connection to the lights is broken. Just to tell you all, that StandScan Pro is
a great box, but I think it can easily broke. I think I w
29 matches
Mail list logo
