Re: [volt-nuts] Replace neons with LEDs in Fluke 845AB

Hi Lou, Its been awhile since I made this mod, but I had the foresight to save the project to K04BB's site. K04BB /Fluke/Fluke 845A AB Still works great, hope you have the same results. Dallas On 6/5/2016 9:51

[volt-nuts] Replace neons with LEDs in Fluke 845AB

Question for Dallas Smith: I want to replace neons with LEDs in my Fluke 845AB. Following your instructions below, did you mount the LEDs where the neons were on the PCB and use the plastic light tubes or did you mount the LEDs hard up against the LDRs in the yellow foam block? Thanks, Lou Qu

[volt-nuts] LTZ1000 project build

This whole discussion does not really apply to the LTZ1000 circuit, that is the bare 7.15..V output, w/o step up amplifier, as all drift parameters were attenuated by orders of magnitude, depending on the resistors, R1-R5. In the eevblog thread, several volt-nuts measured the real dependency,