] vSolartron7081 rom reading (m k)
BTW, make absolutely sure you save the Zener current token value somewhere
safe.
___
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow
Good luck on the key. Someone in Italy (IIRC) was able to do from
the
pictures.
Yes, I made it myself, used a dremel on a brass plate, I still havent
made it duplicated it in a real shop, I'm using with a 7061, it's the
same key than the 7081. m k if you need a copy I can try to have it
BTW, make absolutely sure you save the Zener current token value
somewhere safe. The rest of the cal constants can be recovered with some
good calibration standards, but the Zener value takes some pretty
specialized calibration.
I think the performance of the 7081 is really phenomenal given
] vSolartron7081 rom reading
Hi Joe,
I am in the UK near Guildford. But give me time to get to the locksmith at the
weekend first.
And I am going to try just unplugging the cal key too.
Regards,
M K
___
volt-nuts mailing list -- volt-nuts@febo.com
] vSolartron7081 rom reading
Hi Charlie,
partial success, calibrate,refresh worked, the display told me so, but the
calibrate,dump command did not do anything visible.
M K
Date: Tue, 15 Jan 2013 18:08:02 -0800
From: cbl...@centurytel.net
To: volt-nuts@febo.com
Subject: Re: [volt-nuts
, 13 Jan 2013 17:14:07 +
Subject: Re: [volt-nuts] vSolartron7081 rom reading
If all you want is to save the calibration factors, just issue CALIBRATE,DUMP
command
To refresh the EAROM calibration factors, issue CALIBRATE,REFRESH - barring
component failure that should be good
-
From: volt-nuts-boun...@febo.com [mailto:volt-nuts-boun...@febo.com] On
Behalf Of m k
Sent: Tuesday, January 15, 2013 4:30 PM
To: volt-nuts@febo.com
Subject: Re: [volt-nuts] vSolartron7081 rom reading
I just noticed a gotcha, I need to set the key to calibrate before I may
issue those
Going from memory, no, you have to pull the roms and read them. At
least, that's what a few of us in the group have done.
You can access ram and nvram, though.
--
Bill Ezell
--
They said 'Windows or better'
so I used Linux.
___
volt-nuts
Of Bill Ezell
Sent: 13 January 2013 13:28
To: volt-nuts@febo.com
Subject: Re: [volt-nuts] vSolartron7081 rom reading
Going from memory, no, you have to pull the roms and read them. At least,
that's what a few of us in the group have done.
You can access ram and nvram, though.
--
Bill Ezell
:36:52 +
Subject: Re: [volt-nuts] vSolartron7081 rom reading
Actually, I believe that the MONITOR command will allow you look at storage
anywhere within the address space of either of the processors, see pages 8.1
through 8.5 of the service manual. So it should be possible to READ the ROMs
,
David Partridge
-Original Message-
From: volt-nuts-boun...@febo.com [mailto:volt-nuts-boun...@febo.com] On Behalf
Of m k
Sent: 13 January 2013 16:57
To: volt-nuts@febo.com
Subject: Re: [volt-nuts] vSolartron7081 rom reading
Hi David,
well it is currently working and close to calibrated
11 matches
Mail list logo
