Actually, I believe that the MONITOR command will allow you look at storage anywhere within the address space of either of the processors, see pages 8.1 through 8.5 of the service manual. So it should be possible to READ the ROMs this way if both processors are working and communicating.
However it would be pretty slow, and as all the ROMs are socketed, it's not a big deal to just remove them and read them in a programmer. Note that I haven't tried this. Regards, David Partridge -----Original Message----- From: volt-nuts-boun...@febo.com [mailto:volt-nuts-boun...@febo.com] On Behalf Of Bill Ezell Sent: 13 January 2013 13:28 To: volt-nuts@febo.com Subject: Re: [volt-nuts] vSolartron7081 rom reading Going from memory, no, you have to pull the roms and read them. At least, that's what a few of us in the group have done. You can access ram and nvram, though. -- Bill Ezell ---------- They said 'Windows or better' so I used Linux. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
