I tried various options, like below, but none of the work. How can I use
the mroute to specify a node (and not an interface or an address)?
vppctl ip *mroute* 224.0.0.0/8 via GigabitEthernet0/4/0
vppctl ip *mroute* 224.0.0.0/8 via GigabitEthernet0/4/0 Accept
vppctl ip *mroute* 224.0.0.0/8 via
Probably, but I don’t know the command. Essentially you want a CLI command
that configures a fib to direct packets/flows to an arbitrary node.
Maybe “ip route” or “ip mroute” has what you need.
DBGvpp# ip help
mroute ip mroute [add|del] /
[table ] [via [],
…
route
Jef, is there a cli command I can use to instruct VPP to forward
multicast to that node?
On Mon, Oct 9, 2017 at 6:23 PM, Shaw, Jeffrey B
wrote:
> We have this code, which is supposed to tell the fib that packets going to
> the 224.0.0.x/24 network should be delivered
We have this code, which is supposed to tell the fib that packets going to the
224.0.0.x/24 network should be delivered to our node.
{
dpo_proto_t proto = 0;
dpo_id_t dpo = DPO_INVALID;
fib_prefix_t pfx = {};
pfx.fp_addr.ip4.as_u32 = 0x00E0; /* 224.0.0.0 */
pfx.fp_len
Here is the trace of the packet that is dropped. Any help is very
appreciated.
00:05:18:275995: dpdk-input
GigabitEthernet0/4/0 rx queue 0
buffer 0x446a: current data 14, length 68, free-list 0, clone-count 0,
totlen-nifb 0, trace 0x1
PKT MBUF: port 0, nb_segs 1, pkt_len 82
buf_len
Just tried the routing plugin with the fixes. Unfortunately, incoming
multicast packets are dropped by VPP. Here is the packet trace. Do you have
any idea? The same setup worked with VPP 1609...
00:05:18:275995: dpdk-input
GigabitEthernet0/4/0 rx queue 0
buffer 0x446a: current data 14,
That's great. Thanks a lot, Jeff. So maybe now the OSPF also will work. My
fix of the segfault was just adding "if" in "src/vlib/counter.h". So maybe
this broke the multicast forwarding from VPP to Linux...
I will try the version with your fixes.
On Mon, Oct 9, 2017 at 1:18 PM, Shaw, Jeffrey B
I’ve submitted changes 8716, 8717, and 8718, which should fix the issues we’ve
discussed in this thread.
Thanks,
Jeff
From: Michael Borokhovich [mailto:michael...@gmail.com]
Sent: Monday, October 09, 2017 9:07 AM
To: Ni, Hongjun
Cc: Neale Ranns (nranns)
Hello,?
I am writing regarding a proposal to change API messages related to l2fib mac
address.
In vpp/src/vnet/l2/l2.api file, currently two API messages related to l2fib
uses u64 for mac address instead of u8 mac[6]. While rest of VPP API calls use
array of six bytes to store mac address.
Hi,
After applying the fixes suggested by Jeff, I was able to compile the
router plugin with VPP 1707.
It runs and allows to enable tap-inject and set up interfaces addresses
without crashing.
The problem I'm facing now is with setting up FRR OSPF on top of the
VPP+router plugin.
FRR OSPF is
Thanks, Hongjun,
I will check this once I see that the routing plugin works with VPP1707.
On Fri, Oct 6, 2017 at 7:25 PM, Ni, Hongjun wrote:
> Hi Michael and Neale,
>
>
>
> As per my previous fixing experience on router plugin, I guess that the
> cause may locate at:
>
>
Hi,
Is there any cli command and/or API to push, pop and swap MPLS labels to
the packet?
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi, Can vpp interface be set promisc? I want to receive any packets through
netcards.
来自 魅族 MX4 Pro___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
I am working on VPP v17.04.2-2.
I use to work with 10Gb/s Intel NICs. Now, I would like to use a 40Gb/s
Mellanox ConnectX-3 NIC.
I read a previous thread on the topic (
https://lists.fd.io/pipermail/vpp-dev/2017-June/005540.html) however it
refers only to the new generation ConnectX-4.
The intel NIC with SR-IOV functionatity (i40e, x710) support be set to swichdev
mode ???
"switchdev mode" can be set by below command
#devlink dev eswitch set :01:00.1 mode switchdev___
vpp-dev mailing list
vpp-dev@lists.fd.io
Alec,
> A good step in the right direction. How does this translate in terms of
> python package versioning?
> Ideally, we should have a python PyPI package for programming VPP using
> python library.
Currently, it does not at all translate to python package versioning.
There is already a PyPI
Hello Marco,
I had a look on the test case log
(https://jenkins.fd.io/job/vpp-csit-verify-virl-master/7480/robot/report/log.html)
- it's always the best action you can do to check what test case really caused
the failure as there are some tests expected to fail because of non-fixed
issues in
Please, take a look at this logs:
https://jenkins.fd.io/job/vpp-csit-verify-virl-master/7480/console
After Ed and yourself mentioned it... maybe the cause of the failure is linked
to this failure instead?
14:32:52 14:11:12 Tests.Vpp.Func.Ip4 Tunnels.Lisp.Eth2P-Ethip4Lisp-
L2Bdbasemaclrn-Func ::
18 matches
Mail list logo