Thanks, is there a plan to surpport 802.3ad?
Regards,
Ewan
ewan
From: John Lo (loj)
Date: 2018-01-04 00:05
To: yug...@telincn.com; otroan
CC: vpp-dev
Subject: RE: [vpp-dev] bond
VPP does support static interface bonding via DPDK link bonding PMD:
http://dpdk.org/doc/guides/prog_guide
Hi Ole,
Yes, I need 802.3ad interface, is there a way to do it?
Regards,
Ewan
ewan yugang
杭州全维技术股份有限公司 北京研发部门
手机:17310665879
Q Q : 185237808
邮箱:yug...@telincn.com
地址:北京市朝阳区望京西路金隅国际G座2305
网站:http://www.telincn.com
From: Ole Troan
Date: 2018-01-03 17:40
To: Jim Thompson
CC: lin huang; yug
HI all,
Does vpp surpport interface bond ? How do I configure them?
Regards,
Ewan
ewan
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
at /home/vbras/44/VBRASV100R001/vpp1704/build-data/../src/vlib/main.c:1736
#9 0x77790f23 in thread0 (arg=140737347494560) at /home/vbr
Regards
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
If I set down one of its interface and set up it, then everything is OK.
Any ideas?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-11-17 12:21
To: vpp-dev
Subject: network loop
Hi all,
My version is 17.04, sometimes there will be a large number of packets
fcb4160b00 in ?? ()
#13 0x7f81f481a92d in vlib_unix_main (argc=, argv=)
at /home/wangzy/VBRASV100R001/vpp1704/build-data/../src/vlib/unix/main.c:606
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.
6mn);
return (i6mn->i6mn_entry);
}
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-11-06 09:17
To: Neale Ranns (nranns); vpp-dev
Subject: Re: Re: [vpp-dev] IPV6 Forwarding error
Hi neale,
I've added a protection on it, but should it be invalid somehow?
Regards,
Ewan
Hi neale,
I've added a protection on it, but should it be invalid somehow?
Regards,
Ewan
yug...@telincn.com
From: Neale Ranns (nranns)
Date: 2017-11-04 23:01
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] IPV6 Forwarding error
Hi Ewan,
I would guess that fib_index0 is invalid
Hi all,
Here is ipv6 forwarding error, my version is 17.04.
Any idea?
Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault.
mfib_forward_lookup (is_v4=0, frame=0x7fffb8626f00, node=0x7fffb5cffe80,
vm=0x779aa2a0 )
at
Hi neale,
Do we need to set ip address on gre interface?
Regards,
Ewan
yug...@telincn.com
From: Neale Ranns (nranns)
Date: 2017-10-24 19:07
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] GRE error on vpp 17.04
Hi Ewan,
I have more positive results;
vagrant@localhost:/vpp$ vppctl
: Misc
Regards,
Ewan
yug...@telincn.com
From: Neale Ranns (nranns)
Date: 2017-10-24 00:06
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] GRE error on vpp 17.04
Hi Ewan,
Are you adding an overlapping sub-net?
Can we see please:
sh int addr
regards,
neale
From: <vpp-dev-b
down
root@test:~# vppctl set int ip address gre0 9.9.9.1/24
exec error: Misc
root@vbras:~#
Regards,
EWAN
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
Why there is no vlan l2 forward, only bridge forward ?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
I have one main core and five worker cores, is there a way to deliver some
specific packets from one core to another?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp
Hi,
When will this be ok, any plan?
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-09-04 13:17
To: yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] snat and fragmented packet
Hi,
NAT plugin currently doesn’t support
Hi all.
Is there a way to cross compile vpp?
How to compile vpp for ubuntu on centos?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi.
It's compiled for x86 target. Would you like to give a shot?
Regards,
Ewan
yug...@telincn.com
From: Pierre Pfister (ppfister)
Date: 2017-09-11 15:24
To: yug...@telincn.com
CC: vpp-dev
Subject: Re: [vpp-dev] Build vpp on openwrt
Hello.
I didn't try it.
But the hardest is probably
Hi,
It's Linux system and It's easy to prune modules in openwrt.
Regards,
Ewan
yug...@telincn.com
From: Guo, Ruijing
Date: 2017-09-11 08:34
To: yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] Build vpp on openwrt
Hi,
I am wondering what usage for vpp on openwrt.
Thanks,
-Ruijing
From
Hi all,
Is there anyone try to build vpp on openwrt?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
Does vpp acl sourpport ajust priority?
I have configured ten acl rules, if i want to move the tenth acl to be the
first acl, is there a easy way to do this?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https
Hi all,
Does node snat surpport fragmented packet? My vpp version is 17.07.
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Thanks
Regards,
Ewan
yug...@telincn.com
From: Steve Shin (jonshin)
Date: 2017-08-11 23:01
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] Policy routing
Hi Ewan,
In VPP we have a generic classifier feature that can be used to filter user
specific traffic to support PBR.
User can
Hi,
Does vpp surpport policy routing?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi,
Please let us know about it then, thanks.
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-08-03 13:32
To: chupenghong; vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] Workers for SNAT may compete for the same outside
address
Hi all,
Is there any plan to configure bond interface with cmd?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi all,
I had found out a mistake, thanks.
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-15 14:36
To: vpp-dev
Subject: Re: [vpp-dev] tx_packet_error
Hi all,
If vpp is running on the vm, everything is ok. But on physical host system,
somethimes it can't work after
?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-15 10:21
To: vpp-dev
Subject: Re: tx_packet_error
Hi all,
With cmd "vppctl pcap tx trace on", I have caught tx packets, any guides?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-
Thanks,
Ewan
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-07-13 19:59
To: Luke, Chris; yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] trace
Folks,
If one wants/needs to trace packets which vpp creates from whole cloth, here’s
how to do it. Typically, it’s an input-node
Hi all,
With cmd "vppctl pcap tx trace on", I have caught tx packets, any guides?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-13 12:13
To: vpp-dev
Subject: tx_packet_error
Hi all,
After hours of running, vpp can rx packets, but can't tx packets.
Here is
12
We have checked that VNET_SW_INTERFACE_FLAG_ADMIN_UP and
VNET_HW_INTERFACE_FLAG_LINK_UP are both setted.
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Is this framework will be applied to IPoE?
Regards,
Ewan
yug...@telincn.com
From: Ni, Hongjun
Date: 2017-06-26 10:39
To: Ni, Hongjun; yug...@telincn.com; Vincent Jardin
CC: vpp-dev
Subject: RE: [vpp-dev] PPPOE
To make it clear:
The PPPoE plugin will contains fast path graph node and slow
Hi,
I have found that code, thanks.
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-06-15 16:19
To: yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] det nat expire
Hi,
Life time (expire time) is updated when packet
Hi all,
Every nat session has it's life time, if only beyond that time, it will be
deleted.
So what if one user is downloading huge file and the downloading time is beyond
the session life time.
I have't seen any code on this, am i missed something?
Regards,
Ewan
yug...@telincn.com
Hi there,
New applications can do this themselves, but what about old applications such
as TFTP?
Regards,
Ewan
yug...@telincn.com
From: otroan
Date: 2017-05-26 16:52
To: yugang
CC: vpp-dev
Subject: Re: [vpp-dev] ALG
Hi there,
> Many applications have two channels, one is data chan
Hi Ole,
Not yet, but i don't know whether fd.io projects can provide fine-grained
traffic control as openflow does, or whether fd.io can be agile on traffic.
What's your opnion?
Regards,
Ewan
yug...@telincn.com
From: otroan
Date: 2017-05-30 15:50
To: yugang
CC: vpp-dev
Subject: Re: [vpp
Hi all,
Is there any plan to surpport openflow?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
devices.
Regards,
Ewan
yug...@telincn.com
From: otroan
Date: 2017-05-23 18:42
To: yugang
CC: vpp-dev
Subject: Re: [vpp-dev] ALG
Hi Ewan,
> Is there any plan to surpport ALG?
I am quite the non-believer with regards to ALGs.
But you can always make a proposal. What ALGs do you need and
Hi all,
Is there any plan to surpport ALG?
Regards,
Ewan
ewan
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
in ?? ()
#11511 0x840fff854501 in ?? ()
#11512 0x45d389480089 in ?? ()
#11513 0x3940578bed31ed31 in ?? ()
#11514 0x00401f0f79736857 in ?? ()
^C#11515 0x148b48017d8dee89 in ?? (Quit
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev
Hi,
There is no code to process ICMP in func "snat_det_in2out_node_fn", so it
treats ICMP packet as UDP packet, then we get the wrong output packet.
Regards,
Ewan
yug...@telincn.com
From: otroan
Date: 2017-05-20 20:00
To: yug...@telincn.com
CC: vpp-dev
Subject: Re: [vpp-dev] five
Hi all,
My mistake, sorry to bother :) .
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-05-20 15:20
To: vpp-dev
Subject: Segmentation fault in loading snat_plugin.so
Hi all,
Thanks for time.
I have adjusted snat nodes like below, then i got segmentation fault.
It seems
Hi all,
Thanks for time.
I have adjusted snat nodes like below, then i got segmentation fault.
It seems that when node snat-det-out2in is registering himself, there is no
node snat-out2in.
But node snat-out2in was already registered before that, why ?
VLIB_NODE_FUNCTION_MULTIARCH
Hi Ole,
Thanks, it seems that there is no icmp procedure in det nat, why is it like
this?
Regards,
Ewan
ewan
From: otroan
Date: 2017-04-25 16:06
To: yugang
CC: vpp-dev
Subject: Re: [vpp-dev] five tuple nat
Ewan,
> Do we have any plan to surpport five tuple nat like linux kernel?
That
Thanks for your advice.
Regards,
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-05-15 14:29
To: yug...@telincn.com; vpp-dev
Subject: RE: RE: [vpp-dev] SNAT deterministic crash
Hi,
we don't have plan to allocate memory dynamically (maybe
Thanks.
Ewan
yug...@telincn.com
From: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-05-15 13:53
To: yug...@telincn.com; vpp-dev
Subject: RE: RE: [vpp-dev] snat crash
https://wiki.fd.io/view/VPP/Command-line_Arguments#.22heapsize.22_parameter
Matus
From: yug
Hi all,
I have add compile option -DCLIB_VEC64,
if i want to get this cmd "vppctl snat deterministic add in 192.168.60.0/16 out
10.10.55.1/32" work, what else need i to do?
Or how much mem do i need here?
Regards,
Ewan
yug...@telincn.com
_
=) at
/usr/src/1704/VBRASV100R001/vpp1704/build-data/../src/vlib/unix/main.c:604
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
GigabitEthernet2/a/0
yug...@telincn.com
From: Neale Ranns (nranns)
Date: 2017-05-12 20:44
To: yug...@telincn.com; vpp-dev
Subject: Re: [vpp-dev] arp_input
Hi Ewan,
Please post your configs and the output of ‘sh ip arp’.
Thanks,
neale
From: <vpp-dev-boun...@lists.fd.io> on behalf o
on 17.04
if (!((FIB_ENTRY_FLAG_ATTACHED & src_flags) ||
(FIB_ENTRY_FLAG_CONNECTED & src_flags))
)
{
error0 = ETHERNET_ARP_ERROR_l3_src_address_not_local;
goto drop2;
}
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@l
/tools
/usr/vpp/vpp/build-root/../src/configure: line 2231: LT_INIT: command not found
configure: error: cannot find install-sh, install.sh, or shtool in .
"/usr/vpp/vpp/build-root/../src"/.
make: *** [tools-configure] Error 1
root@ubuntu:/usr/vpp/vpp/build-root#
Regards,
Hey,
Do we have any plan to surpport five tuple nat like linux kernel?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Thanks, that is helpful.
Can we use rte_spinlock_lock directly on vpp? Or any other options?
Regards,
Ewan.
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-03-02 20:10
To: yug...@telincn.com; Luke, Chris; Ed Warnicke
CC: vpp-dev
Subject: RE: RE: [vpp-dev] system func in vpp
Do you
Is func rte_malloc safe to be called between rte_spinlock_lock adn
rte_spinlock_unlock or can it be only called at main thread?
Ewan
yug...@telincn.com
From: Luke, Chris
Date: 2017-03-01 20:14
To: yug...@telincn.com; Dave Barach (dbarach); Ed Warnicke
CC: vpp-dev
Subject: RE: RE: [vpp
Thanks.
So it's not security to use unix socket too? If i want to send some data from
vpp to linux or to another process, any options?
Regards,
Ewan
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-02-28 21:12
To: Luke, Chris; yug...@telincn.com; Ed Warnicke
CC: vpp-dev
Subject
I would like to add veth interface in vpp for every phy interface, " system("ip
link add vpp type veth peer name kernel-vpp") ".
It's convenient to do this from vpp.
Regards,
Ewan.
yug...@telincn.com
From: Ed Warnicke
Date: 2017-02-28 11:44
To: yug...@telincn.com
CC: vpp
"int system(const char *command)"
I would like to use this func to start another dameon , such as "
system("zebra -d") ".
Regards,
Ewan
yug...@telincn.com
From: Ed Warnicke
Date: 2017-02-28 11:15
To: yug...@telincn.com
CC: vpp-dev
Subject: Re: [vpp-dev] sy
Hi, all
Does vpp can't use func system? Any reason to this or what can i do if i
really need ?
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi, ALL
I would like to pick out one kind of flow which without five tuple session and
lead them to the specified CPU worker.
The benifet is that we need no locker in the session creation procedure.
What your guys opinion?
Regards,
Ewan.
yug...@telincn.com
Hi all
I create a ppp interface and set ip on it, the interface route dpo is glean,
which means need to be resloved by arp? How could i to get this correct?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https
+1
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-01-21 07:58
To: Damjan Marion (damarion); t...@lists.fd.io; csit-...@lists.fd.io;
honeycomb-...@lists.fd.io; disc...@lists.fd.io; vpp-dev; nsh_sfc-...@lists.fd.io
Subject: Re: [vpp-dev] [discuss] VPP 17.01 Released
Hey Damjan
My mistake, sorry to bother, thanks.
Regards,
Ewan
yug...@telincn.com
发件人: yug...@telincn.com
发送时间: 2017-01-19 16:06
收件人: 余刚; vpp-dev
主题: 回复: [vpp-dev] send packet in vpp
Here is my node func.
VLIB_REGISTER_NODE( ip4_timer_test_node) = {
.function = ip4_timer_test_process,
.type
);
b0->current_length = radlen + sizeof (ip4_header_t) + sizeof (udp0);
//vlib_put_frame_to_node(vm, ip4_lookup_node.index, f);
}
}
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
I have tried that now, and it's working.
Thanks,
Ewan
yug...@telincn.com
From: Damjan Marion
Date: 2017-01-16 23:16
To: yugang
CC: Dave Barach (dbarach); vpp-dev
Subject: Re: [vpp-dev] rte_timer
Have you considered to use process nodes instead?
If you search forvlib_process_suspend
ld-vpp-native/dpdk/dpdk-16.07/lib/librte_timer/rte_timer.c:431
#3 0x0040fe53 in main (argc=26, argv=0xb08810) at
/usr/src/VPP16/vpp1609/build-data/../vpp/vnet/main.c:271
(gdb)
yug...@telincn.com
From: Dave Barach (dbarach)
Date: 2017-01-15 21:45
To: yug...@telincn.com; vpp-dev
Subj
Hi, all.
If i would like to use dpdk timer, what extra configuration i need to make?
Since that if i just call func " rte_eal_init(argc, argv)" in vpp, it always
reminds me that there is not enough DPDK mem, why?
Regards,
Ewan.
yug...@t
Hi, thanks for your time to read this.
In function "ip4_lookup_multicast", the ethernet header is one byte
dislocation, which we get it throuch api "ethernet_buffer_get_header".
It's right in the unicast process like "ip4_lookup", is there something wro
hernet2/6/0
6.0.0.3/32
unicast-ip4-chain
[@0]: dpo-load-balance: [index:14 buckets:1 uRPF:13 to:[0:0]]
[0] [@2]: dpo-receive: 6.0.0.3 on GigabitEthernet2/6/0
10.0.0.0/24
unicast-ip4-chain
[@0]: dpo-load-balance: [index:12 buckets:1 uRPF:11 to:[0:0]]
[0] [@0]: dpo-drop ip4
yug...@telin
I think you do not need to do this, because the control plane will do such
route stuff, but the premise is that you have listened to the change of the
control plane.
yug...@telincn.com
From: Matej Klotton -X (mklotton - PANTHEON TECHNOLOGIES at Cisco)
Date: 2017-01-02 23:29
To: Neale Ranns
u8 next_hop_address[16];
}) vl_api_ip_add_del_route_t;
Regards,
By Ewan.
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
Hi, all, thanks for your time.
Please help me to check this, how to fix this compile error, thanks.
It's ok on some vms, but not all vms, why.
Building vlib in /usr/src/vpp1609/build-root/build-vpp-native/vlib
make[2]: Entering directory
istering
interface.
For example, if the registering interface is "host-vpp0", it's ok to find it
with func " hash_get_mem ", if the registering interface is "host-vpp1", it's
failed to
find "host-vpp0" which has already been creat
#
Connection closed by foreign host.
Disconnected from remote host(Workstation) at 18:13:38.
Why, is there something missed?
yug...@telincn.com
From: yug...@telincn.com
Date: 2016-12-15 18:06
To: 余刚; John Lo (loj); vpp-dev
Subject: Re: Re: [vpp-dev] startup.conf
Hi all,
VPP could not get up
Sorry to bother, I have figure it out, thanks.
yug...@telincn.com
From: yug...@telincn.com
Date: 2016-12-15 18:06
To: 余刚; John Lo (loj); vpp-dev
Subject: Re: Re: [vpp-dev] startup.conf
Hi all,
VPP could not get up with the first startup.conf, but it's ok with second
startup.conf.
Why
Thank you
yug...@telincn.com
From: John Lo (loj)
Date: 2016-12-15 11:57
To: yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] startup.conf
https://wiki.fd.io/view/VPP/Command-line_Arguments#.22dpdk.22_parameters
From: vpp-dev-boun...@lists.fd.io [mailto:vpp-dev-boun...@lists.fd.io
Hi,
May be that your nic is not support VTx, just try to switch to intel nic.
By Ewan
yug...@telincn.com
发件人: 王鹏
发送时间: 2016-12-02 15:25
收件人: vpp-dev
主题: [vpp-dev] Can not see any interface but local0
Hello, anyone
When viewing the interfaces, (use command: sudo vppctl show interface), I
or normal way to do this?
Regards,
Ewan
yug...@telincn.com
___
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
That's helpful, thanks.
Regards,
Ewan
yug...@telincn.com
From: John Lo (loj)
Date: 2016-11-12 13:44
To: yug...@telincn.com; vpp-dev
Subject: RE: [vpp-dev] Doxygen
For VPP 16.09, doxgen generated documentation can be found here:
https://docs.fd.io/vpp/16.09/
Regards,
John
From: vpp-dev
77 matches
Mail list logo