this is a significant update to the forecasting extension. since the last
stable release (3.0.8), this adds:
- support for more forecast sources, including
- US National Weather Service (NWS)
- the weather underground (WU)
- open weathermap (OWM)
- UK Met Office (UKMO)
- Aeris Weather
Hi,
You will probably get a number of answers but essentially if you have bad
data in your archive you need to fix (all of) that then drop/rebuild daily
summaries or you will be forever chasing your tail. You can work out where
the issue is (daily summaries or archive) by based on where the bad
During the time when I was developing a new driver, I managed to get some
ridiculous rain values in the database - even here we don't get rain that
is measured in kilometres!
I've tried to delete the very large 'rain' values form the database and
also running the 'wee_database' tool to delete a
On Thursday, December 8, 2016 at 4:32:11 PM UTC-5, Matt VanGiesen wrote:
>
> 2032 in mode 4
>
> But, when verifying the weewx.conf, I found typo in the model number...I
> believe when I re-installed after the upgrade weewx used an archived .conf
> file that was incorrect. I'm vetting it now for m
Yes,
I had commented on the skin = Ftp line and not the connection data. I
uncommented that line and commented on the connection data. Now the upload
is done only by rsync.
Thank you.
El jueves, 8 de diciembre de 2016, 22:33:34 (UTC+1), gjr80 escribió:
>
> So it's fixed?
>
> On Friday, 9 Decemb
So it's fixed?
On Friday, 9 December 2016 07:27:46 UTC+10, Juan Antonio Mosquera wrote:
>
> yes, weewx.conf thanks
>
> El 8/12/2016 9:13 p. m., "gjr80" >
> escribió:
>
>> Hi,
>>
>> You likely have a missing skin= setting for a report under [StdReport] in
>> weewx.conf - have a look at all of you
2032 in mode 4
But, when verifying the weewx.conf, I found typo in the model number...I
believe when I re-installed after the upgrade weewx used an archived .conf
file that was incorrect. I'm vetting it now for more errors..
Thanks for the great support and awesome program!
On Thursday, Decembe
yes, weewx.conf thanks
El 8/12/2016 9:13 p. m., "gjr80" escribió:
> Hi,
>
> You likely have a missing skin= setting for a report under [StdReport] in
> weewx.conf - have a look at all of your [[]] stanzas. If you can't find the
> error either puot a wee_debug output or post a copy of your weewx.
On Thursday, December 8, 2016 at 4:10:34 PM UTC-5, Matt VanGiesen wrote:
>
> I upgraded to 17.3 and lost ability to collect pool...was working OK until
> then, though slow to sync with pool sometimes. This has been cycling for 5+
> hours now after rebooting and resetting weather station. Keep it
I upgraded to 17.3 and lost ability to collect pool...was working OK until
then, though slow to sync with pool sometimes. This has been cycling for 5+
hours now after rebooting and resetting weather station. Keep it simple,
cause I'm stupid...or new to Linux (but loving and learning)!
Log file:
Hi,
You likely have a missing skin= setting for a report under [StdReport] in
weewx.conf - have a look at all of your [[]] stanzas. If you can't find the
error either puot a wee_debug output or post a copy of your weewx.conf with any
sensitive info removed.
Gary
--
You received this message
I am now using rsync to upload the files to a remote server. It seems to
upload the data correctly but I have this error in creating the graphics,
any ideas ?.
It does not generate the same graphics as it generated with FTP.
Thank you.
Dec 8 20:58:14 raspberrypi weewx[26137]: T
Thank you
Am Mittwoch, 7. Dezember 2016 14:47:58 UTC+1 schrieb mwall:
>
> On Tuesday, December 6, 2016 at 8:37:36 PM UTC-5, Bill Morrow wrote:
>>
>> I built a system where an Arduino reads sensors using I2C, and sends the
>> data to a Raspberry Pi as a small packet using RF24Mesh radios. Then a
Thank you very much! I will give it a try and let you know how I go on and
will check through the logs for decode failed messages.
Thanks,
Nicky
On Wednesday, December 7, 2016 at 10:37:36 PM UTC, mwall wrote:
>
> On Wednesday, December 7, 2016 at 1:09:50 PM UTC-5, Nicky G wrote:
>>
>> Hello, my
Hi all
Well after getting nothing back from WU
i setup a new pws station on there IAYR17
and it now works fine( day only untill i replace the cap)
so WU RF faulty lets see if i get a reply to the emails
cheers thanks again for all the help
--
You received this message because you are subscr
What exactly does this patch do? How do you install? Compatible with
version 3.6.2?
El domingo, 30 de diciembre de 2012, 17:45:15 (UTC+1), William Page
escribió:
>
> I had a little trouble while generating this patch. I hope I got it right.
>
> My own testing with this was very positive. It wo
16 matches
Mail list logo