Re: [weewx-user] Upgrade issue 3.8.2 to 3.9.1

Hi Thomas, that's what I thought but my install of 3.9.1 still required the engine.py file to be updated, so I'm not sure what happened there. I'm up and running so I guess I'm just passing this on for the devs info, perhaps something hasn't been updated or included :) I'll make sure I have that

Re: [weewx-user] Upgrade issue 3.8.2 to 3.9.1

Yes, this was in commit 6e7f3aac , which is now part of v3.9.1. -tk On Sat, Apr 6, 2019 at 5:11 PM wrote: > Hi all > > Just upgraded my installation as above. The hardware is WeatherDuino > emulating the Davis

Re: [weewx-user] Re: weewx stop working

On CentOS, your log should be in /var/log/messages. Are you saying that is missing completely? On Sat, Apr 6, 2019 at 2:08 PM Damjan Hajsek wrote: > I have done some more test and this is what I found out. > detected unhandled Python exception in '/usr/bin/weewxd' > don't know is this is the

[weewx-user] Re: How to Include Modern XTide in Forecasting Extension?

On Saturday, April 6, 2019 at 2:21:39 PM UTC-4, V. Kelly Bellis wrote: > > Trying next: > PYTHONPATH=bin python /usr/share/weewx/user/forecast.py --action=parse > --method=xtide --filename=/var/tmp/ellsworth.txt --debug > > Which then reults: > pi@raspberrypi:/ $ PYTHONPATH=bin python

Re: [weewx-user] Re: Acurite Bridge stopped working yesterday

Thanks for the information, unfortunately I think my bridge may be in an unrecoverable state. I tried as you suggested and set the interceptor to respond with both firmware version 224 and 126 (one at a time) and I could see the desired responses when browsing to it on my computer with responses

Re: [weewx-user] Import MQTT value into weewx database, display via seasons skin

Hi Ralph, I think that your way of doing things is the closest to what I had envisaged. Thus far I have managed to create a .py script that I can run manually by copying and pasting from yours, modifying the IP address to 'localhost' as they are both on the same RPi. Watching the log of the

[weewx-user] Upgrade issue 3.8.2 to 3.9.1

Hi all Just upgraded my installation as above. The hardware is WeatherDuino emulating the Davis comms protocol. On a previous occasion I had an issue which I think was similar to the errors below and was asked to use an updated engine.py file - which fixed the problem. After the upgrade I had

Re: [weewx-user] Import MQTT value into weewx database, display via seasons skin

Hi Ralph, I think your suggestion is the closest to what I was envisaging, so I had a bit of a stab at it this morning. Created a ReadMqttScript.py file, copied your script into it and made it executable. Changed your IP address to the one I'm using (192.168.1.130) and gave it a try:

[weewx-user] Re: weewx stop working

I have done some more test and this is what I found out. detected unhandled Python exception in '/usr/bin/weewxd' don't know is this is the reason? Dne sobota, 06. april 2019 19.45.36 UTC+2 je oseba Damjan Hajsek napisala: > > I noticed that weewx stop working, so I have checked log and there is

[weewx-user] RSync failing after the first upload

Hello, weewx 3.8.2 running in a Docker container. Connecting the the database just fine and using the Simulator. I have rsync configured to upload to a cloud host. First time through, the report upload works fine: weewx[9]: reportengine: Running report RSYNC weewx[9]: reportengine: Found

[weewx-user] Re: How to Include Modern XTide in Forecasting Extension?

*Notes on my way to nowhere* 11:41 AM Saturday, April 6, 2019 (VKB) Matt says: then i installed the harmonics file: sudo mkdir /opt/harmonics cd /opt/harmonics tar xvf ~/Downloads/harmonics-dwf-20181227-free.tar.bz2 = 1) Just checking, should permissions be

[weewx-user] weewx stop working

I noticed that weewx stop working, so I have checked log and there is no log. Than I restarted weex and it restart normally but still no logs. Any idea what can be wrong?? It worked for a long time with no problem but suddenly it stopped It is version 3.8.1 and is installed on centos 7.6. and

Re: [weewx-user] Re: Acurite Bridge stopped working yesterday

On Saturday, April 6, 2019 at 11:15:14 AM UTC-4, Jamie Borget wrote: > > And when trying to use the methods mentioned in the article you mentioned > my Apache logs all show a 404 when trying to post to /messages/. Any help > would be greatly appreciated. > if you must run apache on port 80 on

Re: [weewx-user] Re: Acurite Bridge stopped working yesterday

apparently the smarthub/bridge will not report any sensor data unless it has established a connection with one of the acurite servers (or something that responds like an acurite server). i tested this behavior with a couple of smarthubs - one still running the old firmware (126) and one

Re: [weewx-user] Import MQTT value into weewx database, display via seasons skin

You might be interested in my project here: https://hackaday.io/project/101680-solar-powered-wifi-temperature-sensor-for-weewx I am sending the data every 2 minutes. I do it directly to the Raspb via Wifi. On Sat, Apr 6, 2019 at 7:04 AM vince wrote: > On Saturday, April 6, 2019 at 6:52:06 AM

[weewx-user] Re: Belchertown skin for weewx now available!

thank you i wach it now Il giorno sabato 6 aprile 2019 14:19:06 UTC+2, Pat ha scritto: > > Keep an eye out for skin version 1.0 which re-does the graph generator > with a full re-write. It is actively under development right now > .

Re: [weewx-user] Re: Acurite Bridge stopped working yesterday

Thanks for the reply however I’m still having problems getting this working again. As I’ve mentioned I’ve updated the dns on my router so the requests/posts all reach my pi but I can’t seem to get my pi to accept the requests and or send the expected reply. As mentioned in my first post all the

[weewx-user] Re: Crash with log info

I got a different exception from the HP1000 driver today. I am adding it to this thread since I had sent Susan a link to this post. I believe the call should be to time.sleep() rather than just sleep() but I’m not up to enough to really know (there appear to be several places lacking “time.” In

Re: [weewx-user] Import MQTT value into weewx database, display via seasons skin

On Saturday, April 6, 2019 at 6:52:06 AM UTC-7, Ralph Underwood wrote: > > I have a small python program that subscribes to mqtt and writes a text > file. I then use the filepile as a service to get the data into WeeWx. The > "main" data comes from a Ultimeter station via the driver. > > > I

[weewx-user] Re: How to Include Modern XTide in Forecasting Extension?

This is wonderful Matt, thank you so very much!! I will study this and try implementing this weekend. FWIW, I followed the procedure as outlined in the section entitled "*Installation Guide For New Users of XTide*" that I wrote when I created XTide v2.15.2 Help (b20190309)

Re: [weewx-user] Import MQTT value into weewx database, display via seasons skin

I have a small python program that subscribes to mqtt and writes a text file. I then use the filepile as a service to get the data into WeeWx. The "main" data comes from a Ultimeter station via the driver. I came up with this approach while I was modifing/testing using the WeeWxMQTT driver a

Re: [weewx-user] Import MQTT value into weewx database, display via seasons skin

You could write a WeeWX service that talks to the MQTT broker, then augments the data stream from your Fine Offset station (this would be configuration #4 in the *Intake

[weewx-user] Re: Belchertown skin for weewx now available!

Keep an eye out for skin version 1.0 which re-does the graph generator with a full re-write. It is actively under development right now . On Saturday, April 6, 2019 at 7:21:14 AM UTC-4, Maurizio Mezzetti wrote: > > hello, thanks

[weewx-user] Re: Belchertown skin for weewx now available!

hello, thanks very muck, the skin works great, only one question, how add graph 7th in graph page (humidity ) or or unify the two wind graphs? thanks a lot Il giorno martedì 1 gennaio 2019 13:52:02 UTC+1, Pat ha scritto: > > All, please upgrade to 0.8.2 > > Details here: >

[weewx-user] Re: Seasons template Translate.

http://www.weewx.com/docs/customizing.htm#localization On Saturday, 6 April 2019 13:23:45 UTC+3, antoniohe...@gmail.com wrote: > > Someone could help me I do not know what to modify to translate the template > into Spanish > THANK YOU !!! > > -- You received this message because you are

[weewx-user] Seasons template Translate.

Someone could help me I do not know what to modify to translate the template into Spanish THANK YOU !!! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] forecast 3.3.2 config question

Hello, Up to the 22. March i used WU as provider for forecast with the setting num_periods = 72 in skin.conf This setting works for forecast_table.inc from version 3.2.0 included in index.html.tmpl from weewx version 3.8.2. Since WU shut down the old Api i try to use Open Weather Map an Dark

[weewx-user] Import MQTT value into weewx database, display via seasons skin

After searching for quite a few hours, I have come up with nothing that helps what I am trying to achieve. I have a RPi 3 that is running weewx, with a FineOffset USB station connected to it. This works fine, happily displaying the data via a Lightpd webserver. I also have an ESP8266 in a