Mikael,
The two pads A0 and A1 are for setting the base address and are not allowed
to float (not documented very well so this stumped me for ages). Your setup
is exactly (all be it with a different base address) the same as mine by
the looks of things.
When you stop and then restart
Operation is back to normal! All I see is I am missing daily data from
July 1 thru 7...but I can live with that for sure. Thanks so much for your
assistance guys.
/Eric
On Friday, July 5, 2019 at 3:58:01 PM UTC-4, Eric Gammeter wrote:
>
> Hi- My INDEX.HTML file is being produced each hal
Thank you for answering!!
I have another question...
Is it possible ti know through the weather console data, the batterry live
of the console?
Thank you.
vince escreveu em qua, 3/07/2019 às 15:38 :
> On Wednesday, July 3, 2019 at 7:10:58 AM UTC-7, Rui Pinto wrote:
>
>> Is it possible to speci
have you tried forcing a refresh in the browser and/or deleting the browser
cache??
On Tuesday, 9 July 2019 20:04:20 UTC+3, 19Jan74 1974 wrote:
>
> Hello
> I have the following problem. The plots on the current page have not
> changed since June 30th. Everything is okay on the weeks page and o
Thank you . That was exactly the cause.
Sorry for my stupidity.
best regards
Jan
Am Dienstag, 9. Juli 2019 19:08:56 UTC+2 schrieb Andrew Milner:
>
> have you tried forcing a refresh in the browser and/or deleting the
> browser cache??
>
>
>
> On Tuesday, 9 July 2019 20:04:20 UTC+3, 19Jan74 1974
Hi,
I am not sure quite what you are asking. If you have a Davis station with a
console the console battery voltage should be stored in your archive in the
consBatteryVoltage field. You should be able to use consBatteryVoltage in any
reports just as you do outTemp, barometer etc. You should als
> and then issue this command quickly: -
>
> tail -f /var/log/syslog
You can also open a second (or third or fourth etc) terminal window and run
tail -f in that terminal; much easier to monitor what is going on and you don’t
miss the first so many lines.
Gary
--
You received this message beca
My mistake, can’t read my own repo, plots.js is of course the correct file.
Line numbers will likely vary slightly depending on commits.
Gary
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving email
I think it is overkill--but I did it anyway--so I've been running Raspbian
with weewx with the Cumulus plug-in and the CPU is idle. I don't believe
heat would be an issue in this config however I am using an RTL-SDR that
runs very hot so it skews things. No case or fans presently. My onboard
I am seeing the same thing. It looks like the error is coming from
manager.py here:
def _calc_weight(self, record):
if 'interval' not in record:
raise ValueError("Missing value for record field 'interval'")
elif record['interval'] <= 0:
raise ValueError("Non-posit
I have no issues with the AS3935 lightning detector module, but I'm using
the I2C pinouts.
Settings in weewx.conf file:
[AS3935]
bus = 1
calibration = 6
pin = 17
address = 3
noise_floor = 2
indoors = false
binding = archive
On Sunday, July 7, 2019 at 12:27:16 PM
11 matches
Mail list logo