[weewx-user] FTP Upload Problems

Hello, since some days i ve problems to upload my ftp files to my webserver i use weewx 4.2.0 system is uptodate here a part of my syslog: Dec 17 08:35:27 raspberrypi weewx[652] INFO weewx.cheetahgenerator: Generated 15 files for report Belchertown in 10.59 seconds Dec 17 08:35:27 raspberrypi

[weewx-user] Re: GW1000 - solar radiation data lost while switching from Interceptor to API driver

Hi, The short answer is that radiation (aka solar insulation) or an equivalent is not available via the GW1000 API so the GW1000 driver does not emit it. The reason you see it on Ecowitt pages and WU is that the GW1000 takes what the GW1000 API refers to as 'light' in lux and approximates

[weewx-user] Re: yet another question to GW1000 api driver mapping

Peter, Comments below. Gary On Wednesday, 16 December 2020 at 23:18:26 UTC+10 Vetti52 wrote: > Thanks, Gary, for your polite explanations. > Since I have read some of your comments with equal advices in other > threads, I proceeded already to sucessfully map the fields. Otherwise I did > not

Re: [weewx-user] GW1000 - solar radiation data lost while switching from Interceptor to API driver

syslog shows you have mapped 'UV’ from ‘uv’ and ‘radiation’ from ‘solar_radiation’. my working config has ‘UV’ mapped from ‘uvi’ and ‘radiation’ from ‘uv' > On 17 Dec 2020, at 10:41 am, 'Rainer Lang' via weewx-user > wrote: > > I was running Weewx with the GW1000 interceptor and everything

Re: [weewx-user] weewx installation failure on Raspberry Pi

AHA! Yes, I understand. I just read into the extension for it. I will install the appropriate extension and move forward. Thank you for your time, it is highly appreciated. If I run into an issue with the extension and getting it to work, I will start a new thread. Cheers! John On Wednesday,

Re: [weewx-user] weewx installation failure on Raspberry Pi

I see. The WLL logger is not a supported logger, so you'll have to install an extension for it. There are several listed on the Wiki . -tk On Wed, Dec 16, 2020 at 1:35 PM John Mora wrote: > Thank you for the response and your patience. > > I am using the

Re: [weewx-user] weewx installation failure on Raspberry Pi

Thank you for the response and your patience. I am using the new WeatherLink Live connected via Ethernet cable directly to my router. I am able to ping the device from the Raspberry Pi and even use the browser to show current conditions via JSON. It is currently configured and working as

Re: [weewx-user] weewx installation failure on Raspberry Pi

It appears that you are trying to use the WeatherLink iP logger. Are you sure that's what you want? Most people have serial or USB loggers. The WLIP logger is not made any longer. -tk On Wed, Dec 16, 2020 at 1:20 PM John Mora wrote: > Thanks for the response. The reason I used the python 2

Re: [weewx-user] weewx installation failure on Raspberry Pi

Thanks for the response. The reason I used the python 2 directions was pure user error. I retried using the python 3 instructions and was much more successful, although am still getting an error, but it appears that the it can't open a port to connect to the weatherlink live device. Dec 16

Re: [weewx-user] weewx installation failure on Raspberry Pi

h - he used the python2 instructions, not the python3 instructions. Might be easier to just delete the package and follow the python3 instructions which will get him the python3 package. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To

Re: [weewx-user] Weewx stops reporting on fixed interval

Tom, maybe I've found the problem of the stopping: Dec 16 00:13:45 raspberrypi weewx[2295]: Stopping weewx weather system: weewx not running Dec 16 00:13:45 raspberrypi systemd[1]: weewx.service: Succeeded. Dec 16 00:13:45 raspberrypi systemd[1]: Stopped LSB: weewx weather system. Dec 16

Re: [weewx-user] weewx installation failure on Raspberry Pi

1. Any particular reason why you're trying to use Python 2 on a Debian 10 system? Normally, the expectation is that Deb 10 (buster) users would be using Python 3. 2. What is the results of *ls -l /usr/share/weewx* 3. What is the results of *ls -l /usr/share/weewx/user* On Wed, Dec 16, 2020

[weewx-user] weewx installation failure on Raspberry Pi

Hello, I am attempting to install weewx on my Raspberry Pi 4 8G. I follow the instructions in the manual: http://weewx.com/docs/debian.htm I log in to the system using the same user/credentials as when I installed PiHole and Unbound which installed and ran without any issues. When the weewx

Re: [weewx-user] Weewx stops reporting on fixed interval

Thank you! Il giorno mercoledì 16 dicembre 2020 alle 16:24:54 UTC+1 kk44...@gmail.com ha scritto: > on the computer where you run ssh: > scp root@rpi:/var/log/syslog . > > Please, note the dot at the end. Replace "rpi" by the IP address or name > of your RPi. May be, you need to replace

[weewx-user] Re: Installation of version 4.2.0

I would simply symlink 'from' the existing tree 'to' the weewx directory: ln -s /home/weewx/public_html /home/pi/domoticz/www/weewx Then you should see the web pages from weewx in your web if you use http://hostname/weewx -- You received this message because you are subscribed to the

[weewx-user] Re: yet another question to GW1000 api driver mapping

As I could not wait for an answer, I tried to replace $x in the example mentioned above (marked in yellow) by any of the supposed expressions. But in any case I get this type of error: ERROR weewx.cheetahgenerator: Generate failed with exception '' ERROR weewx.cheetahgenerator: Ignoring

Re: [weewx-user] Weewx stops reporting on fixed interval

on the computer where you run ssh: scp root@rpi:/var/log/syslog . Please, note the dot at the end. Replace "rpi" by the IP address or name of your RPi. May be, you need to replace "root" by "pi" or "user" to get it work. After that you will find a file named "syslog" in the current directory.

Re: [weewx-user] Weewx stops reporting on fixed interval

on the computer where you run ssh: scp root@rpi/var/log/syslog . Please, note the dot at the end. Replace "rpi" by the IP address or name of your RPi. May be, you need to replace "root" by "pi" or "user" to get it work. After that you will find a file named "syslog" in the current directory.

Re: [weewx-user] Weewx stops reporting on fixed interval

Yes, I can ssh into my RPi, but I don't know how to scp the log. Il giorno mercoledì 16 dicembre 2020 alle 15:28:09 UTC+1 tke...@gmail.com ha scritto: > If you can ssh into your RPi, you could scp the log to > somewhere convenient. Then upload it to a cloud service such as > pastebin.com. >

Re: [weewx-user] Weewx stops reporting on fixed interval

If you can ssh into your RPi, you could scp the log to somewhere convenient. Then upload it to a cloud service such as pastebin.com . Alternatively, you can use a text editor to trim it down to the essentials, then post it here. But, please don't post anything too big here. -tk On Wed, Dec 16,

Re: [weewx-user] Weewx stops reporting on fixed interval

You're right, Tom. If not attached the log because I should copy and paste you the exactly moment when Weewx stops reporting, but how can I do it when I'm not logged on my Raspberry when it happens? Are there other possibilities? Il giorno mercoledì 16 dicembre 2020 alle 14:41:45 UTC+1

Re: [weewx-user] Weewx stops reporting on fixed interval

Sorry, but it does not look like you attached the log. On Wed, Dec 16, 2020 at 5:32 AM Mauro De Lauretis < mauro.delaure...@gmail.com> wrote: > Hi Tom, > I've never thought that the log is interesting, simply I was not able to > see where the error is. :-) > > Station Hardware is a Davis Vantage

Re: [weewx-user] Weewx stops reporting on fixed interval

Hi Tom, I've never thought that the log is interesting, simply I was not able to see where the error is. :-) Station Hardware is a Davis Vantage Pro2, while the debug is already set to debug = 1. Regards Mauro Il giorno mercoledì 16 dicembre 2020 alle 14:11:56 UTC+1 tke...@gmail.com ha

Re: [weewx-user] Wind Rose empty in Steel Series

You have the correct configuration, but remember, it only applies *when the database is created*. Thereafter, the schema is read from the database. You can try rebuilding the daily summaries using wee_database: *sudo wee_database --drop-daily* *sudo wee_database --rebuild-daily* The rebuild

[weewx-user] Re: yet another question to GW1000 api driver mapping

Thanks, Gary, for your polite explanations. Since I have read some of your comments with equal advices in other threads, I proceeded already to sucessfully map the fields. Otherwise I did not even had an idea about field_map in GW1000. Sorry, that you need to explain again and again the

Re: [weewx-user] Weewx stops reporting on fixed interval

I know you think the log is uninteresting, but to more experienced eyes, it may contain some clues. Be sure to set debug=1. Also, what kind of hardware? On Wed, Dec 16, 2020 at 2:46 AM Mauro De Lauretis < mauro.delaure...@gmail.com> wrote: > Hello, > > I have been experiencing an issue for the

[weewx-user] Re: Installation of version 4.2.0

Making progress: now weewx up & running with simulator Next is linking to a webserver. Apache already running on all my Raspberries due to Domoticz. It's folder (within the Domoticz-installation) is /home/pi/domoticz/www No folder /var/www present Therefore references in the WeeWx-setup

[weewx-user] Weewx stops reporting on fixed interval

Hello, I have been experiencing an issue for the last two weeks, and so far have not been able to determine the cause. I was hoping someone may have some ideas. I am running the Weather34 Skin ( https://github.com/steepleian/weewx-Weather34) Weewx 4.2.0. MySQL Database OS Rasbian on Raspberry

[weewx-user] Re: Installation of version 4.2.0

*Another test from CLI:* sudo pip3 install python3-configobj *Response:* Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Collecting python3-configobj Could not install packages due to an EnvironmentError: 404 Client Error: Not Found for url:

[weewx-user] Re: Installation of version 4.2.0

This morning tried a few more variations as described in the setup-instruction, but no luck with modules configobj and usb. Intending to apply WeeWx, the module for usb is not really required (instead a UDP-sniffer to be applied), but configobj seems critical. Op woensdag 16 december 2020 om

[weewx-user] Re: Installation of version 4.2.0

*Example command-line & response *(with basic translation manually added behind each line). Had to use sudo, because otherwise remark that no admission and question whether I have administrator rights. Python3, because (although Python2.7 is on the machine as part of Domoticz) generally I try

[weewx-user] Re: Installation of version 4.2.0

Vince, First step was straightforward, simple use of this instruction (considering that the target machine is Raspberry with Raspian Buster (latest): http://weewx.com/docs/debian.htm Response from the installation process (directly translated from the dutch text): python-configobj (>= 4.5) but