Re: [weewx-user] Re: Skin not change

if you have any other skins enabled, and they point to the same directory, they would be overwriting the new specification > On 3 Mar 2021, at 6:13 pm, gjr80 wrote: > > [[StandardReport]] > # This is the old "Standard" skin. By default, it is not enabled. > skin = neowx-material > enable =

[weewx-user] Re: Skin not change

Hi, Hard to say, could be any of a myriad of problems. I suggest you edit weewx.conf, set debug = 1, save weewx.conf and restart WeeWX. Let WeeWX run for at least two to three archive intervals and then post a copy of the log showing the entire WeeWX startup and the two to three archive interva

[weewx-user] Skin not change

Hi. I put the new skin “neowx-material” folder inside the home folder -> weewx -> Skins I changed the destination: [[StandardReport]] # This is the old "Standard" skin. By default, it is not enabled. skin = neowx-material enable = true I restart Weewx It doesn't work, I change the skin bu

Re: [weewx-user] ;:; SQLite schema report

Thank you both for the replies! I've dived into the end of this pool without comprehending its depth. This all started after spending more than a few frustrating days trying to find the documents for, or figure out a proper set of, field maps to cover three apparent subsets of WeatherFlow data

Re: [weewx-user] Weather station on Raspberry Pi with LTE/4G connect

i’ve implemented my own bidirectional gateway and i also parked this issue - next version’s problem, as i had no present need for it. but i am moving my system (of which weewx is a component) to mqtt backbone (e.g. my alarms weewx service moving to mqtt for more general use) so i would be very i

Re: [weewx-user] Weather station on Raspberry Pi with LTE/4G connect

A couple more thoughts. 1. MQTTSubscribe can be a bit complicated/convulated to configure, so don’t hesitate to reach out with any questions. 2. I do some thing similar to get data into my test environment. Currently if there is a failure (broker down, client down, etc.), data may not make it to

[weewx-user] Re: WE4000SE WiFi Intercept without network connection

Thank you very much for pointing me in the right direction Using the information provided I got the station working without internet. For anybody with the same intentions and problems, here is what I did. Not specific to weewx, but maybe it helps someone else searching for a solution: As men

[weewx-user] ws28xx: ValueError: The device has no langid (debian in LXC)

I've just tried to get my ws28xx running on a debian installation running in a LXC on a QNAP NAS. dmesg shows the dongle was connected: [297714.611821] usb 1-2: new full-speed USB device number 4 using xhci_hcd [297714.893545] hid-generic 0003::.0002: hiddev0: USB HID v1.11 Device [LA CR

Re: [weewx-user] Re: Changing my PWS hardware...

Yes, it is 915 MHz sensor array. Sounds like a good project to tinker with. I was not sure about the Ambient sensors Protocol. Apparently from what said, The Ecowitt GW1000 receiver will capture the information. I have to read little further to make sure I am clear. Thank you! Ted

Re: [weewx-user] Weather station on Raspberry Pi with LTE/4G connect

Thanks a lot for the reply, ich will give it a try. I think the best solution ist MQTT an two instances of Weewx. I´ll come back, if I have more Questions Regards Christian kk44...@gmail.com schrieb am Dienstag, 2. März 2021 um 16:56:32 UTC+1: > MQTT on sending side

Re: [weewx-user] Re: Changing my PWS hardware...

Hi Ted weewx can't catch the sensor array data via the interceptor driver as the WH2902C is an Ambient modified piece. It cannot send to a customized server using the Ecowitt protocol. Maybe it works with the WU protocol, but haven't heard of it. If it were a non-Anbient Fine Offset clone, it w

[weewx-user] Belchertown - AerisWeather Interval 1,3,24

How do I get my skin to display the interval links? weewx.conf forcast_enable = 1 forecast_provider = "aeris" forecast_interval_hours = 24 thanks -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving

Re: [weewx-user] Re: Changing my PWS hardware...

Thanks for the information ! From: weewx-user@googlegroups.com on behalf of Bill Arthur Sent: Tuesday, March 2, 2021 12:20 PM To: weewx-user Subject: [weewx-user] Re: Changing my PWS hardware... I think you'll find the best way is to purchase a Ecowitt GW1000.

[weewx-user] Re: Changing my PWS hardware...

I think you'll find the best way is to purchase a Ecowitt GW1000. I listens to the 2902 array on 915MHz and puts the data on your WiFi. I use the GW1000 extension and it works flawlessly. https://github.com/gjr80/weewx-gw1000 On Monday, March 1, 2021 at 5:21:11 PM UTC-6 ted...@gmail.com wrote:

Re: [weewx-user] Weather station on Raspberry Pi with LTE/4G connect

MQTT on sending side MQTT on the receiving side You additionally need an MQTT broker like test.mosquitto.org or you install Mosquitto on your Web-Server. The second is the better solution. The documenta

Re: [weewx-user] Belchertown AQI error from Aeris weather

I think this is being actively developed in this thread on the skin's GitHub page. Please raise your issue there and the folks from the community can try to fix it as well On Tuesday, March 2, 2021 at 6:33:26 AM UTC-5 gert.a...@gmail.com w

Re: [weewx-user] Database compatibility versions 3.91 and 4.3.0

Thanks! El martes, 2 de marzo de 2021 a las 10:56:09 UTC, tke...@gmail.com escribió: > There were no changes in the database between v3.9 and v4.3. > > On Tue, Mar 2, 2021 at 1:58 AM NBF wrote: > >> Good morning: >> I have installed the weewx 3.91 version and i would like to make a new >> inst

Re: [weewx-user] Belchertown AQI error from Aeris weather

Hi I'm using the lastest version of Belchertown and I have 2 questions. I have 11 of these lines for each archive interval: *ERROR user.belchertown: Error getting AQI from Aeris weather. The error was: list index out of range* Do these lines count against my daily allowed calls to Aeris? I have

Re: [weewx-user] Database compatibility versions 3.91 and 4.3.0

There were no changes in the database between v3.9 and v4.3. On Tue, Mar 2, 2021 at 1:58 AM NBF wrote: > Good morning: > I have installed the weewx 3.91 version and i would like to make a new > install (new raspberry) and i would like to make in the last version > (4.3.0). > I would like to keep

[weewx-user] Database compatibility versions 3.91 and 4.3.0

Good morning: I have installed the weewx 3.91 version and i would like to make a new install (new raspberry) and i would like to make in the last version (4.3.0). I would like to keep all the previous data. Will it be possible to make a restore from de database in version 3.9.1 (SQLLite : sdb