[weewx-user] HP1000 driver with WS-1001 clone - "HP1000: Timed out too many times"

Hi Weewx users. Recently I bought WS-1001 clone - HP1001 made by Conrad (Germany). Two or three years ago I've installed Weewx for my DIY weather station so I'm familiar with this software. I'm also long time Linux user so I'm not afraid of CLI. So. I have working Weewx installation. I see log

Re: [weewx-user] Re: HP1000 driver with WS-1001 clone - "HP1000: Timed out too many times"

console. > As a side note - if you have something like the RTL-SDR dongle then you > might be able to tap into the data from the weather station to the console > and use the RTL_433 to get it into WeeWx. > Not a satisfactory answer I know but without having one of the consoles to >

[weewx-user] rsync: host key verification failed - problem

rsync: host key verification failed Dear Weewx users. I'm trying to send files generated by Weewx to external webserver (paid hosting) with rsync. I'm familiar with rsync, ssh and Linux. Weewx is running on Raspberry Pi as 'pi' user. Here are my configs: /home/pi/.ssh/config Host CF #Host

[weewx-user] Re: rsync: host key verification failed - problem

le to ssh into the remote system with the user+key > you specified. Same procedure you did to get 'pi' to work, just do it > after sudo(ing) to root so you set the 'root' account up similiarly. Two > minute thing to do. > > On Thursday, July 20, 2023 at

[weewx-user] Understanding Weewx new method of logging

Hi WX users. I'd like to ask about logging in Weewx (I'm using version 4.10.2). To make a long story short, I'd like to completely turn off logging by Weewx - because I'm using Raspberry Pi with SD card and want to minimize write operations as much as possible. I've read article on wiki (htt

[weewx-user] Re: Understanding Weewx new method of logging

tmpfs > defaults,nosuid,mode=0755,nodev,noatime 0 0 > #- > > Note that the result here is that you will lose 'all' logs when you > reboot, but the upside is it never writes to SD card. In this > configuration your pi SD is close to read-only.

Re: [weewx-user] Re: Understanding Weewx new method of logging

ad of a microSD with your RPi or a SLC > microSD card if you want to avoid wear out of your SD card ... > I'm using both approaches for years now with my RPi's - and have my logs > available in case they are needed 😎 > On 27.07.2023 12:18, Tomasz Lewicki wrote: >

Re: [weewx-user] Understanding Weewx new method of logging

I confirm that from a moment when I changed False to True, log are not filled anymore. I have only these lines: [Logging] version = 1 disable_existing_loggers = True # Root logger [[root]] level = ERROR handlers = syslog, So probably I found Holy Grail. czwartek, 27

[weewx-user] Re: Are both meteo-services.com and weather365 now defunct?

When you enter https://www.weather365.net, you got infographics that this site is closed since 31.12.2020 and it automatically redirects to https://meteo-services.com - is this the site you are looking for? WHOIS for meteoservices.com: Updated Date: 2023-07-20T05:35:03Z Creation Date: 2002-07-2

[weewx-user] Barometer and pressure once again

I'm trying to sort out barometer and pressure values. I own HP1001 clone. Internal T/H/P sensor was calibrated with my friends certified barometer before. Currently it sensor shows absolute pressure value 936,7 hPa and it almost perfectly (+/- 1 hPa) aligns with very accurate numerical forecast

Re: [weewx-user] Barometer and pressure once again

Rainer, Greg, thank you both for thoughts and hints. Indeed, when I wrote "When calculated by Weewx itself ("software" option enabled in weewx.conf), my weather station shows 1001 hPa - still too low", I meant what Weewx calculates and show on my webpage, not on console's display - display is

Re: [weewx-user] Barometer and pressure once again

your skin, then something is wrong with > weewx. Rather unlikely. > Did you read the barometer topic in the weewx online documentation ? > On 31.08.2023 10:29, Tomasz Lewicki wrote: > > Rainer, Greg, > > thank you both for thoughts and hints. Indeed, when I wrote "When &

Re: [weewx-user] Barometer and pressure once again

W dniu 31.08.2023 o 16:55, 'Rainer Lang' via weewx-user pisze: to calibrate your WS-1001 (Ambient version of the FineOffset/EcowittWH24 outdoor array and the WH1080 console) you could just follow the instructions in https://www.wxforum.net/index.php?topic=40730.0 chapter 6 determine the offset a

Re: [weewx-user] Barometer and pressure once again

7;t allow entering the offset (which in my opinion is much more instructive way than just entering REL and ABS values). I have to check once more ABS value with certified barometer. By the way: I'd be grateful if someone could explain the following abbreviations - SLP and ISA :) --

Re: [weewx-user] Barometer and pressure once again

OK, so I was using these terms without knowing them :) poniedziałek, 4 września 2023 o 20:37:41 UTC+2 Greg Troxel napisał(a): > Tomasz Lewicki writes: > > > abbreviations - SLP and ISA :) > > Sea Level Pressure > > https://en.wikipedia.org/wiki/International_Standa

[weewx-user] Different time for report generation and sending to website via rsync?

Hello Weewx users. I'd like to know if it is possible to set different time (interval) for generating reports: [StdArchive] archive_interval = 300 and for syncing the files to website by rsync? My station is installed in a place where I have only cellular internet (LTE) with monthly transfer

[weewx-user] Re: Different time for report generation and sending to website via rsync?

Thank you, this is exactly what I was looking for :) sobota, 20 stycznia 2024 o 21:48:57 UTC+1 bell...@gmail.com napisał(a): > Checkout, http://www.weewx.com/docs/5.0/custom/report-scheduling/ > > On Saturday 20 January 2024 at 15:37:10 UTC-5 Tomasz Lewicki wrote: > >>

[weewx-user] Driver permission error when starting Weewx

I got problem with running Weewx with old/new station. Recently I bought new station and moved it to previous remote location. Old station will be installed in my home. It is clone of FineOffset HP1000 so both HP1000 driver from AussieSusan (https://github.com/AussieSusan/HP1000) and Intercepto

[weewx-user] Re: Driver permission error when starting Weewx

I run weewx as root: sudo systemctl start weewx If I set higher port (8080), weewx starts but I have empty queue for interceptor. niedziela, 21 stycznia 2024 o 18:49:48 UTC+1 matthew wall napisał(a): > On Sunday, January 21, 2024 at 12:23:34 PM UTC-5 Tomasz Lewicki wrote: > > >

[weewx-user] DIY weather station + Weewx on Raspberry Pi - how to join them?

Dear Weewx users. It's my first post. I looked into wiki and docs but still are stuck so I ask here. My configuration is as follows: 1. DIY solar powered WiFi weather station (built from here: https://www.instructables.com/id/Solar-Powered-WiFi-Weather-Station-V20/ - the project known to some

Re: [weewx-user] DIY weather station + Weewx on Raspberry Pi - how to join them?

W dniu piątek, 24 lipca 2020 14:34:18 UTC+2 użytkownik Mike Harold Chan napisał: > > cool wx sensor, but I wish will also include Rain collector, Solar and UV > sensor and can be read with weather display, these are my important part too >> >> >> I will add some of them for sure - maybe without

Re: [weewx-user] DIY weather station + Weewx on Raspberry Pi - how to join them?

W dniu piątek, 24 lipca 2020 16:01:50 UTC+2 użytkownik Tom Keffer napisał: > > Did you read the section *Porting to new hardware > * in the Customizing > Guide? > >> >> Yes, I saw this chapter yesterday when sailing through docs ocean but it is

Re: [weewx-user] Re: MQTT weather data as input to weewx

Hi Ørjan. Did you get your config to work? If yes, where was the problem? W dniu niedziela, 2 września 2018 23:41:39 UTC+2 użytkownik Ørjan Hofstad napisał: > > Here is what I have tried. But cant get it to work. I was just testing > over mqtt client. Maybe Im sending the data wrong or somethi

Re: [weewx-user] Re: MQTT weather data as input to weewx

W dniu poniedziałek, 27 lipca 2020 08:44:42 UTC+2 użytkownik Ørjan Hofstad napisał: > > Hi, > No the plugin does not work. But there is another guy that have made a new > plugin. Maybe that will work. > > https://github.com/bellrichm/WeeWX-MQTTSubscribe > Thank you Ørjan and NorbertF. I have don

Re: [weewx-user] Re: MQTT weather data as input to weewx

W dniu poniedziałek, 27 lipca 2020 10:01:02 UTC+2 użytkownik Tomasz Lewicki napisał: > > > Thank you Ørjan and NorbertF. I have done clean installation of Raspberry > Pi OS, Weewx (APT method) and WeeWX-MQTTSubscribe. Before installing > MQTTSubscribe everything was going witho

[weewx-user] Re: DIY weather station + Weewx on Raspberry Pi - how to join them?

Thank you all for the answers and tips. The right answer was MQTT and topics around it :) -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@g

Re: [weewx-user] Re: DIY weather station + Weewx on Raspberry Pi - how to join them?

W dniu wtorek, 28 lipca 2020 15:31:22 UTC+2 użytkownik Norbert F napisał: > > I use a ESP8266 with "tasmota" for my homemade Weatherstation. Its easy to > configure, didnt need much power, sends mqtt. Tasmota knows the most > Sensors by default and send all mqtt via wifi to weewx-mqttSubscribe dr

Re: [weewx-user] Re: DIY weather station + Weewx on Raspberry Pi - how to join them?

W dniu wtorek, 28 lipca 2020 15:49:24 UTC+2 użytkownik Norbert F napisał: > > Its USB powered because in Winter there is snow on the panel in my area > and so solar dosent work. Yes, I'm afraid of this too. But I will install the station in such manner that I could remove the snow easily from t

Re: [weewx-user] Re: DIY weather station + Weewx on Raspberry Pi - how to join them?

W dniu wtorek, 28 lipca 2020 16:29:06 UTC+2 użytkownik Norbert F napisał: > > I dont think its enough if you are in a area with "Winter", you have very > short and flat sun and sometimes weeks with cloudy sky and nebula. I think > you need a big panel and strong akkus. I don't know yet how my

[weewx-user] Re: Downloading weewx issue

W dniu piątek, 31 lipca 2020 15:32:46 UTC+2 użytkownik Dale Huber napisał: > > > > On Thursday, July 30, 2020 at 7:52:04 PM UTC-4, Dale Huber wrote: >> >> I use the wget command and I get an error from the download site when >> using Linux. Not sure what to do, if i use a browser to download it wi

[weewx-user] Pressure and barometer on one plot?

I'd like to plot station pressure (SP) and corrected pressure (SLP) on one graph. Of course I know station height AMSL so it should be simple (I hope). How could I do it? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this g

Re: [weewx-user] Pressure and barometer on one plot?

W dniu czwartek, 6 sierpnia 2020 15:06:56 UTC+2 użytkownik Tom Keffer napisał: > > [[day_images]] > x_label_format = %H:%M > bottom_label_format = %x %X > time_length = 97200 # 27 hours > > [[[daybarometer]]] > barometer # SLP >

[weewx-user] Re: Driver permission error when starting Weewx

alled explicitly from command line. So why I got "empty queue" when started by 'sudo systemctl start weewx'? wtorek, 23 stycznia 2024 o 15:46:08 UTC+1 gary@gmail.com napisał(a): > sudo only issues the command as root. > What is in the service file for user and

[weewx-user] Re: Driver permission error when starting Weewx

RuntimeDirectoryMode=775 User=root Group=root [Install] WantedBy=multi-user.target środa, 24 stycznia 2024 o 20:33:17 UTC+1 vince napisał(a): > Lets see your systemd service file. > > On Wednesday, January 24, 2024 at 9:46:50 AM UTC-8 Tomasz Lewicki wrote: > >> OK, I changed

[weewx-user] Re: Driver permission error when starting Weewx

the trick: pi@meteo:~ $ python --version Python 3.7.3 środa, 24 stycznia 2024 o 20:36:46 UTC+1 Tomasz Lewicki napisał(a): > Here it comes: > > # systemd service configuration file for WeeWX > > [Unit] > Description=WeeWX > Documentation=https://weewx.com/docs > Requir

[weewx-user] Re: Driver permission error when starting Weewx

a): > Just a thought, but interceptor is 'listening' on port 80. Don't you need > to configure your hardware to 'send' to port 80 on your weewx computer ? > > On Wednesday, January 24, 2024 at 11:39:31 AM UTC-8 Tomasz Lewicki wrote: > >> Previously I had

[weewx-user] Re: Driver permission error when starting Weewx

if your computer is hearing > anything (and what). If it's http the payload should be decipherable. > > > > On Wednesday, January 24, 2024 at 12:01:31 PM UTC-8 Tomasz Lewicki wrote: > >> By hardware do you mean WiFi console from my weather station? If yes, it >>

[weewx-user] Re: Driver permission error when starting Weewx

thing to send traffic to intercept. Run wireshark on your > weewx computer and listen on port 80 and see if your computer is hearing > anything (and what). If it's http the payload should be decipherable. > > > > On Wednesday, January 24, 2024 at 12:01:31 PM UTC-8 Tomasz Lewicki

[weewx-user] Re: Driver permission error when starting Weewx

d it. > > The gui version of wireshark is much easier to understand. > > On Wednesday, January 24, 2024 at 1:16:50 PM UTC-8 Tomasz Lewicki wrote: > >> My mistake. These packets were captured when Weewx was running with >> HP1000 driver. When I changed the driver to inte

[weewx-user] Re: Driver permission error when starting Weewx

gui version of wireshark is much easier to understand. > > On Wednesday, January 24, 2024 at 1:16:50 PM UTC-8 Tomasz Lewicki wrote: > >> My mistake. These packets were captured when Weewx was running with >> HP1000 driver. When I changed the driver to interceptor, I didn'

[weewx-user] Re: Driver permission error when starting Weewx

o > interceptor can try to help more. > > On Wednesday, January 24, 2024 at 1:38:25 PM UTC-8 Tomasz Lewicki wrote: > >> I attach PCAP file with packets captured for 120 seconds. TCP/80 only. >> Weewx was shut down. No traffic on this port until I manually have done the >&g

[weewx-user] Re: Driver permission error when starting Weewx

in copy > copyfile(src, dst, follow_symlinks=follow_symlinks) > File "/usr/lib/python3.8/shutil.py", line 264, in copyfile > with open(src, 'rb') as fsrc, open(dst, 'wb') as fdst: > FileNotFoundError: [Errno 2] No such file or directory: > &#x

[weewx-user] Re: rsync: host key verification failed - problem

Thank you forward :-) > On Friday, July 21, 2023 at 1:14:24 PM UTC+3 Tomasz Lewicki wrote: > >> Thank you for replies. >> >> @Warren Gill: yes, I was thinking about crontab but wanted to use >> built-in solution. Of course crontab is good as backup solution. >&g

[weewx-user] Remove/update archive (history) data

Dear Weewx users. My station was in "test mode" until midnight May 1. Now I want to remove all data before this date. SQLite database is modified and has only data after May 1, 00:00:00. But in my archive (history) data on website I see earlier months and max/min values too. How to get rid of t

[weewx-user] Re: Remove/update archive (history) data

OK, sorry for a noise. I found instructions on the wiki: https://github.com/weewx/weewx/wiki/Cleaning-up-old-'bad'-data But it's strange that I see April's values in history section despite weewx.sdb oldest data is 2024-05-01 00:00:00. środa, 1 maja 2024 o 06:55:45

[weewx-user] Rsync - how to prevent directory from deletion

Dear Weewx users. I'd like to ask how can I prevent Rsync called by Weewx from deleting a directory or file on a remote server when refreshing the site with weather observations? The problem is: I wrote short documentation for people visiting my PWS site. It is in directory called 'docs'. I pu