I've just noticed that if I hover over the Highcharts graphs to see the
individual readings and slide left and right then some of the lines start
behaving oddly. It's a bit difficult to describe but for example on the
wind graph if you hover over a reading where the wind speed is zero (or
very
Hi Magnus
You don't say which version of sdr.py you are using but you need 0.93 to
run the Bresser 7in1.
Have a look at this thread
https://github.com/matthewwall/weewx-sdr/issues/179
Paul
On Tuesday, 28 November 2023 at 14:15:06 UTC magnus hult wrote:
> hello
> I have set up rtl dongle 433
Hi Patrick
See this link for the solution. You need a dot not a hyphen (dash) before
1.3.1.tar.gz
https://github.com/poblabs/weewx-belchertown/discussions/885
Paul
On Tuesday, 10 October 2023 at 19:29:51 UTC+1 salinois wrote:
> hello,
>
> so. I just installed weewx on an other RPi Version
oking for recommendation(s).
>>
>>
>>
>>
>>
>> *From:* weewx...@googlegroups.com *On Behalf
>> Of *paul...@gmail.com
>> *Sent:* Wednesday, July 19, 2023 10:11 AM
>> *To:* weewx-user
>> *Subject:* [weewx-user] Re: Trouble installing Belchertown
Hi Eric
See this link for the solution. You need a dot not a hyphen (dash) before
1.3.1.tar.gz
https://github.com/poblabs/weewx-belchertown/discussions/885
On Wednesday, 19 July 2023 at 14:35:49 UTC+1 vince wrote:
> Guessing you were in a different directory when you ran the wget command,
>
Hi Bob
Your Logia looks to be identical to the Bresser 5-in-1 PC station I use
(model 7002571). With it being the PC version (as opposed to the wireless
version) you can use Bob Atchley's driver WS6in1. I've been using it since
November 2020 and it has worked flawlessly for me. You'll find
Thanks Matthew, all good now.
Paul
On Thursday, 3 March 2022 at 15:24:48 UTC matthew wall wrote:
> paul,
>
> in the file NOAA/NOAA-%Y.txt.tmpl, change this:
>
> #if $month.wind.has_data
>
> to this:
>
> #if $month.windSpeed.has_data
>
> and change this:
>
> #if $year.wind.has_data
>
> to this:
Just noticed something not quite right with the Climatological Summary
table for the year 2022. It is not showing any Wind Speed data.
The Temperature and Precipitation data is being reported and for previous
years everything is OK.
I've just updated to weewx 4.7.0 (from 4.6.2) but I think the
Hi Andy
If you do want to have a Yesterday graph you can use:
time_length = days_ago
time_ago = 1
See
https://github.com/poblabs/weewx-belchertown/wiki/Belchertown-Charts-Documentation#time-scales-for-charts
Paul
On Sunday, 20 February 2022 at 10:28:32 UTC andyhud...@googlemail.com wrote:
>
manche 13 février 2022 à 20:23:07 UTC+1, paul...@gmail.com a écrit :
>
>> Hi Remy
>> Yes I did sudo /etc/init.d/weewx restart. Just in case I've done it again
>> but no change.
>> Can I just check I swapped the correct wxxtypes.py file. I swapped the
>> one in /usr
; Have you triedto stop weewx and restart it ?
> You must do that if you modify python file.
> Cordialy
>
>
> Le dimanche 13 février 2022 à 18:32:38 UTC+1, paul...@gmail.com a écrit :
>
>> I don't report wind gust values/direction in the Current Conditions
>> secti
I don't report wind gust values/direction in the Current Conditions section
of my Seasons skin (version 4.6.2) but in the Statistics (previously
High/Low) section I've always had a Max Wind entry with both speed and
direction reported. Since 4.6.2 the direction is reported as N/A so I've
> I think that's the answer - thanks Paul... just editing it now :) all the
> answers are really appreciated,
>
> Andy
>
> On Thursday, 10 February 2022 at 12:35:14 UTC paul...@gmail.com wrote:
>
>>
>> Hi Andy
>> I don't know if it helps but I've looked at yo
Hi Andy
I don't know if it helps but I looked at your website and noticed that if
you hover over your day graphs you are displaying some data points - but
only at intervals of every 30 minutes. This doesn't tie in with gapsize =
300 set for your day graphs which equates to an interval of 5
Hi Andy
I don't know if it helps but I've looked at your website and noticed that
if you hover over the day graphs you are showing some data points - but
only at intervals of every 30 minutes. This doesn't tie in with gapsize =
300 which equates to an interval of 5 minutes. As it says in
If it's any help I had a look at your website and noticed that if you hover
over your day graphs there are values displayed - but only every 30
minutes. This doesn't tie in with the gapsize = 300 which equates to an
archive interval of 5 minutes. As it says in the graphs.conf the gapsize
If it's any help I had a look at your website and noticed if you hover over
your day graphs there are values reported - but only every 30mins. This
doesn't tie in with a gapsize = 300 which equates to an archive interval of
5mins. As it says in the graphs.conf gapsize should be the same as the
If it's any help I had a look at your website and noticed if you mouse-over
the day graphs there are values reported - but only every 30mins. This
doesn't tie in with the gapsize = 300 which equates to an archive interval
of 5mins. As it says in the graphs.conf gapsize should be the same as
Yes, don't forget the minus. I don't know where you're located but for
stations in the US if you don't put a minus in front of your longitude
you'll end up on the map in the middle of China! Several US stations are
already there! It will certainly mess up their celestial/almanac
information ;)
19 matches
Mail list logo