Hi Andy Yes, your graphs look fine now - glad the suggestion worked. It was worth me persevering - all the above "Message has been deleted" were me trying to post! Don't know what I was doing wrong! Paul
On Thursday, 10 February 2022 at 12:49:52 UTC andyhud...@googlemail.com wrote: > I think that's the answer - thanks Paul... just editing it now :) all the > answers are really appreciated, > > Andy > > On Thursday, 10 February 2022 at 12:35:14 UTC paul...@gmail.com wrote: > >> >> Hi Andy >> I don't know if it helps but I've looked at your website and noticed that >> if you hover over the day graphs you are showing some data points - but >> only at intervals of every 30 minutes. This doesn't tie in with gapsize = >> 300 which equates to an interval of 5 minutes. As it says in graphs.conf >> gapsize should be the same as the archive_interval from weewx.conf. If it >> isn't then I don't think you will get any lines plotted. >> This is a link to the gapsize section in the Belchertown charts >> documentation. >> >> https://github.com/poblabs/weewx-belchertown/wiki/Belchertown-Charts-Documentation#gapsize >> I think your week, month and year graphs plot correctly because the >> gapsize for these graphs is greater than your archive interval. >> I'm no expert but maybe you need to check why you are only sending (or >> receiving) data every 30 minutes? >> Paul >> >> On Wednesday, 9 February 2022 at 19:24:07 UTC gjr80 wrote: >> >>> I suspect you have a case of corrupt station memory. This manifests >>> itself as a Davis station that continues to emit loop but not archive data. >>> In your case you clearly still have loop data being received as your >>> dashboard updates with real data every couple of seconds. The lack of >>> recent archive records means that your day plots may be blank/partially >>> blank due to the lack of recent archive record data, longer historical >>> plots still show correctly up until the date-time the corrupt station >>> memory kicked in. The diagnosis can be confirmed by looking at the log, >>> there will be no errors but you will notice there are no archive records >>> being saved. If you have debug=1 you will also be able to tell by the >>> drivers interaction with your station. >>> >>> I suggest you work through the steps under Corrupt station memory >>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#corrupt-station-memory> >>> >>> in the Troubleshooting Davis stations >>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station> >>> >>> wiki article. >>> >>> Gary >>> >>> On Wednesday, 9 February 2022 at 22:49:16 UTC+10 >>> andyhud...@googlemail.com wrote: >>> >>>> Afternoon - I cant work out why for the life of me i have no lines on >>>> some of my day graphs: >>>> >>>> http://www.finchamweather.co.uk/graphs/?graph=all >>>> >>>> A sub section of my graphs.conf for day is below - any thoughts would >>>> be really welcome.. >>>> >>>> Andy >>>> >>>> [day] >>>> >>>> # Chart Timespan Defaults >>>> >>>> title = "Today" >>>> >>>> show_button = true >>>> >>>> button_text = "Day" >>>> >>>> time_length = today >>>> >>>> tooltip_date_format = "LLL" >>>> >>>> gapsize = 300 # This should be your archive_interval from weewx.conf >>>> >>>> >>>> [[chart1]] >>>> >>>> title = Temperature >>>> >>>> [[[outTemp]]] >>>> >>>> zIndex = 1 >>>> >>>> name = Temperature >>>> >>>> [[[windchill]]] >>>> >>>> [[[heatindex]]] >>>> >>>> color = "#f7a35c" >>>> >>>> [[[dewpoint]]] >>>> >>>> color = purple >>>> >>>> >>>> [[chart2]] >>>> >>>> # The combined Wind Chart works best in this configuration >>>> >>>> title = Wind Speed and Direction >>>> >>>> yAxis_min = 0 >>>> >>>> [[[windDir]]] >>>> >>>> zIndex = 1 >>>> >>>> yAxis = 1 >>>> >>>> yAxis_max = 360 >>>> >>>> lineWidth = 1 >>>> >>>> [[[[marker]]]] >>>> >>>> enabled = true >>>> >>>> [[[[states]]]] >>>> >>>> [[[[[hover]]]]] >>>> >>>> lineWidthPlus = 0 >>>> >>>> [[[windGust]]] >>>> >>>> [[[windSpeed]]] >>>> >>>> zIndex = 2 >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/eb81f94e-29ff-43c5-87a1-a18abe89ca19n%40googlegroups.com.