Re: [weewx-user] GW1000 driver b11 release

I've installed it on two Pi zero W installations (with designated static IP address). Perfect installation, no problems whatsoever. On Tuesday, August 18, 2020 at 8:23:36 AM UTC-5 gjr80 wrote: > On Tuesday, 18 August 2020 13:49:39 UTC+10, Graham Eddy wrote: >> >> unable to reproduce error -

Re: [weewx-user] GW1000 driver b11 release

On Tuesday, 18 August 2020 13:49:39 UTC+10, Graham Eddy wrote: > > unable to reproduce error - driver too reliable! > > sending the debug==3 logs anyway (direct to gary rather than clog up the > forum) in case they prove useful later. > three logs, one with GW1000 disconnected a bit more than 30

Re: [weewx-user] GW1000 driver b11 release

unable to reproduce error - driver too reliable! sending the debug==3 logs anyway (direct to gary rather than clog up the forum) in case they prove useful later. three logs, one with GW1000 disconnected a bit more than 30 secs, another with just a few secs disconnection and another much longer

Re: [weewx-user] GW1000 driver b11 release

I've spent some time trying to work out what is going on here and I am still not 100% sure. The exception that is causing the restart after the 10 second wait is being raised in StdPrint. If that is the case the behaviour you are seeing when the GW1000 is pulled is different to what I have

Re: [weewx-user] GW1000 driver b11 release

On Sunday, 16 August 2020 21:46:49 UTC+10, Graham Eddy wrote: > > > i changed all my pm..24hav fields in weewx.conf and skin.conf and > templates, did the ‘ALTER TABLE archive RENAME col..’ in database, updated > my extensions.py to reflect changed schema/datatypes - all looks good > I should

Re: [weewx-user] GW1000 driver b11 release

i pulled the power plug on the gw1000 to test the new recovery/rediscover and it did not go well.it is cycling through restart of the engine, with gw1000 service falling over soon after starting (it does find a device first).extract from log showing a couple of those cycles with weewx.debug==2

Re: [weewx-user] GW1000 driver b11 release

did the ‘wee_extension —install’ and it is working fine i changed all my pm..24hav fields in weewx.conf and skin.conf and templates, did the ‘ALTER TABLE archive RENAME col..’ in database, updated my extensions.py to reflect changed schema/datatypes - all looks good i have just started

[weewx-user] GW1000 driver b11 release

I have released v0.1.0b11 on Github . The changes include: - when using wee_config --reconfigure to select the GW1000 driver the user is now prompted to set loop_on_init - reworked the wee_config