Ok it will be worth your while posting a request as I suggested so some of
the real WeeWX experts can have a look. Its probable a simple fix but I
don't know what it is.
Ian
On Sat, 30 May 2020 at 16:15, 'Simon Davies' via weewx-user <
weewx-user@googlegroups.com> wrote:
> my station is about 3
my station is about 3 years old, looking back over some old data I have
had this problem (or something similar) for over 12 months, I only noticed
it when upgrading to v4 for weewx & weather34, which I did at the same
time.
On Saturday, May 30, 2020 at 3:14:26 PM UTC+1, steeple ian wrote:
>
Thanks Simon,
that is what I meant.
Out of interest how old is your weather station? I just wonder whether
there has been a change in firmware. I suspect you will get the same
results with the driver I suggested. Also I suspect that driver has not yet
been ported to WeeWX 4. When did you update to
by weewx-page I assume this is what you mean (see screenshot)
The UV Index is the same as the weather34 display
On Saturday, May 30, 2020 at 1:34:03 PM UTC+1, steeple ian wrote:
>
> to remove weewx-crt (you will still need the weather34 service so dont
> delete that)
>
> sudo ,/wee_extensi
to remove weewx-crt (you will still need the weather34 service so dont
delete that)
sudo ,/wee_extension --uninstall crt
(you may have to insert the correct paths depending on your setup)
On Sat, 30 May 2020 at 13:29, steeple ian wrote:
> Hi Simon,
>
> Can you check one more thing please as y
Hi Simon,
Can you check one more thing please as your WeeWX page is not visible to
me. What does the UV reading show there. If it is a correct UV Index, I can
provide a simple fix.
Ian
On Sat, 30 May 2020 at 12:22, 'Simon Davies' via weewx-user <
weewx-user@googlegroups.com> wrote:
> here are t
here are the reading from realtime.txt
30/05/20 12:13:14 22.5 45 10.0 0.7 0.8 148 0.0 0.0 1010.7 SSE 1 m/s C mb mm
8.7 -0.8 0.0 109.2 0.0 24.7 35 22.5 5.1 22.5 12:12 9.7 05:06 2.5 11:15 3.3
02:21 1012.4 00:02 1010.7 12:12 4.0.0 0 3.3 22.5 NULL 2966 NULL 627 110 0.0
0 1 0 ESE NULL m NULL 7.4 NUL
Simon
If you set debug = 1 in weewx.conf
restart and then run sudo tail -f /var/log/syslog from the command line you
should be able to see the loop data coming from your weather station in
real time.
On Sat, 30 May 2020 at 08:57, steeple ian wrote:
> Simon,
> You are correct in your original ass
Simon,
You are correct in your original assumption that w34realtime.txt is based
on the Cumulus realtime.txt specification. It has had few additional values
added but nothing to do with UV measurements.
According to the Cumulus specification position 44 should be UVI but the
value you have there i
Simon,
Ignore that last comment from me. It’s not the answer.
On Fri, 29 May 2020 at 20:09, steeple ian wrote:
> You need to add a conversion under [StdCalibrate]
> [[corrections]]
>
> Not near a computer at the moment and cannot remember the conversion
> factor but have a look here
> https:
You need to add a conversion under [StdCalibrate]
[[corrections]]
Not near a computer at the moment and cannot remember the conversion factor
but have a look here
https://www.epa.gov/sunsafety/calculating-uv-index-0
On Fri, 29 May 2020 at 19:52, 'Simon Davies' via weewx-user <
weewx-user@goog
The UV is correct, however the problem is that the UVI (UV Index) should
be displayed, 7.0 would be a accurate value for the weather during the day
today.
On Friday, May 29, 2020 at 5:21:42 PM UTC+1, J D wrote:
>
> Hi,
> Are you sure UV in the loop is correct?
>
> Using Ian data's for UV was
Interceptor driver, but with python2.7
[Interceptor]
# This section is for the network traffic interceptor driver.
# The driver to use:
driver = user.interceptor
python --version
Python 2.7.13
On Friday, May 29, 2020 at 7:30:59 PM UTC+1, steeple ian wrote:
>
> Simon,
> Are you
Simon,
Are you using the HP1000 driver by any chance with Python3?
On Fri, 29 May 2020 at 17:21, J D wrote:
> Hi,
> Are you sure UV in the loop is correct?
>
> Using Ian data's for UV was a 7.0 and you stated that was working
> correctly.
>
> Your last post has UV 753.0 That does not look correc
Hi,
Are you sure UV in the loop is correct?
Using Ian data's for UV was a 7.0 and you stated that was working
correctly.
Your last post has UV 753.0 That does not look correct.
On Friday, May 29, 2020 at 8:55:30 AM UTC-7, Simon Davies wrote:
>
> LOOP data looks fine
>
> LOOP: 2020-05-29 16
LOOP data looks fine
LOOP: 2020-05-29 16:50:59 BST (1590767459) altimeter: 29.9018046207,
barometer: 29.8979821835, dateTime: 1590767459, dewpoint: 46.58, heatindex:
76.1, inDewpoint: 42.3766863757, inHumidity: 33.0, inTemp: 73.22,
outHumidity: 35.0, outTemp: 76.1, pressure: 29.8636763587, ra
Hi,
The layout looks fine. The issue is the loop data. The UV field in the
realtime data is just a copy of the "UV" field in the loop data. I would
stop weewx and then run weewx at the command line and look at the loop data
output.
On Friday, May 29, 2020 at 8:27:50 AM UTC-7, Simon Davies wrot
using your data it works perfectly. I don't know why I have a different
file layout.
position 39 is cumulus version, which is 4.0.0 in mine and 4.1.0 in
yours, do you know if there are any changes to the layout.
On Friday, May 29, 2020 at 1:40:41 PM UTC+1, steeple ian wrote:
>
> Hi Simon,
> I
Hi Simon,
I have never seen that happen before. Below is my w34realtime.txt file
content a few minutes ago. Stop WeeWX and do a quick cut and paste into
your own file and see what happens. It should indicate where the problem is.
29/05/20 13:34:53 22.5 28 3.1 1.3 1.3 325 0.0 0.0 1020.3 NW 1 m/s C
Weather34 is displaying the Solar radiation reading instead of the UV
index. Any idea how to correct this?
I've installed this version a few weeks ago and its been a problem since
then. WX-HC20-IHVN-1.0.0 WeeWX-(4.0.0) Ambient Weather WS-1000
http://cawston.weather-station.co.uk/
w34realtime.
20 matches
Mail list logo