While I am currently using this setup, wouldnt it be beneficial to
eventually move to the backhauls PTP?
On Wed, Sep 15, 2010 at 1:14 AM, Blair Davis the...@wmwisp.net wrote:
Been doing that for YEARS!
My backhauls are all PtMP.
Blair
Robert West wrote:
Yo, dude! Sectors acting as
Was that all that was in the essid? Qwest, 2wire, and a few others now
do that. They place the default essid and key on the bottom and gamble
that no two with the same las 4 digits land near each other.
On Tue, Sep 14, 2010 at 9:34 PM, RickG rgunder...@gmail.com wrote:
I havent done it in quite
ATT does that here on their wireless dsl routers
On Tue, Sep 14, 2010 at 11:34 PM, RickG rgunder...@gmail.com wrote:
I havent done it in quite sometime, so today I fired up my laptop with
netstumbler while driving around. I picked up a bunch of AP's with numbers
such as 0171 6043, 1163, 0320,
It's the last 4# of the MAC address I think
- Jerry
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Jeromie Reeves
Sent: Wednesday, September 15, 2010 2:15 AM
To: WISPA General List
Subject: Re: [WISPA] Wireless Router Types
Was that
110¹ in the ground? WOW!
--
Justin Wilson j...@mtin.net
http://www.mtin.net/blog xISP News
http://www.twitter.com/j2sw Follow me on Twitter
Wisp Consulting Tower Climbing Network Support
From: RickG rgunder...@gmail.com
Reply-To: WISPA General List wireless@wispa.org
Date: Wed, 15 Sep
I could be wrong, but I think when I checked that once it was an
incorrect guess.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Sep 15, 2010 at 11:09 AM, Jerry Richardson
jrichard...@aircloud.com wrote:
It's the last 4# of the MAC
That's a serious hole.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Sep 15, 2010 at 11:09 AM, Justin Wilson li...@mtin.net wrote:
110’ in the ground? WOW!
--
Justin Wilson j...@mtin.net
http://www.mtin.net/blog – xISP News
Depending on the tower, you can normally loosen most standoffs and
rotate them closer to the tower. Lot of variables there. An angular tower
is harder to rotate the standoff than a tubular tower.
Justin
--
Justin Wilson j...@mtin.net
http://www.mtin.net/blog xISP News
Mikrotik posted this on their Facebook post. I don¹t see the guy clipping
off or a safety climb so don¹t do as he does (unless I missed the safety
portion).
http://www.youtube.com/watch?v=txdv_oNq81I
--
Justin Wilson j...@mtin.net
http://www.mtin.net/blog xISP News
Makes my palms sweat just watching it
WTF isn't he tied off? What an idiot
- Jerry
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Justin Wilson
Sent: Wednesday, September 15, 2010 8:28 AM
To: WISPA General List
Subject: [WISPA] Tower Climb video
Mikrotik
Notice how they blur the faces?
Respect for the dead. RIP.
Randy
On 9/15/2010 9:37 AM, Jerry Richardson wrote:
Makes my palms sweat just watching it
WTF isn't he tied off? What an idiot
- Jerry
*From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]
*On Behalf Of
Tower Climb videoYeah Oh but clipping unclipping makes me
tiirred. (my best whiny voice via email).
How about being dead?
I don't care WHAT OSHA allows. I don't trust ANYONE's hand not to slip.
Even though OSHA may say it's OK, how irresponsible of them to put this video
out
Update on TV Whitespaces Comments:
There are currently 44 WISP comments publicized on the FCC Website
supporting the WISPA proposal. Keep up the good work but we still need
more!
We need everyone to take 15 minutes out of your busy day to voice your
opinion on the WISPA TV Whitespaces
Will make time today.
Sent from my iPhone
On Sep 15, 2010, at 11:00 AM, Rick Harnish rharn...@wispa.org wrote:
Update on TV Whitespaces Comments:
There are currently 44 WISP comments publicized on the FCC Website supporting
the WISPA proposal. Keep up the good work but we still
Makes my colon pucker just watching.
Steve Barnes
General Manager
PCS-WINhttp://www.pcswin.com/
RC-WiFi Wireless Internet Servicehttp://www.rcwifi.com/
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Jerry Richardson
Sent: Wednesday, September 15, 2010 11:37 AM
Tower Climb video
You and me both Steve and I am not afraid of heights.
-DJ Anderson
Shelby Broadband
*From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On
Behalf Of *Steve Barnes
*Sent:* Wednesday, September 15, 2010 12:17 PM
*To:* WISPA General List
*Subject:* Re:
As will we...
- Original Message -
From: Jeremie Chism
To: WISPA General List
Sent: Wednesday, September 15, 2010 9:11 AM
Subject: Re: [WISPA] TV Whitespace Comment Deadline Sept 16th. All WISPsfile
immediately.
Will make time today.
Sent from my iPhone
On Sep 15,
Very few videos make me nauseous, that one did.
On 9/15/2010 9:19 AM, DJ Anderson wrote:
You and me both Steve and I am not afraid of heights.
-DJ Anderson
Shelby Broadband
*From:* wireless-boun...@wispa.org mailto:wireless-boun...@wispa.org
[mailto:wireless-boun...@wispa.org
I want some cameras like that anyone have a recommendation on something they
have personally used / seen?
I'd like wireless option too that way I can send my ROV (employee) up there and
control it remotely...
Thanks
Scott Carullo
Technical Operations
877-804-3001 x102
I must have missed the *OSHA says you don't have to be tied off* part of my
advanced tower safety and rescue class lol
You don't have to do anything... but the fines are really painful. One guy
got a fine for walking too close to the tower while it was being worked on
without a hard hat..
If you have the proper gear and training you would never want to loosen
standoffs to work on them to get them closer to the tower you are attached
to... its harder by far IMO
Scott Carullo
Technical Operations
877-804-3001 x102
From: Justin Wilson
Done. I added my 0.02 worth as well.
Marco
Argon Technologies Inc.
On Wed, Sep 15, 2010 at 11:30 AM, Mark Nash - Lists markl...@uwol.net wrote:
As will we...
- Original Message -
From: Jeremie Chism
To: WISPA General List
Sent: Wednesday, September 15, 2010 9:11 AM
Subject: Re:
Done
Chris Cooper
Intelliwave
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mark Nash - Lists
Sent: Wednesday, September 15, 2010 12:31 PM
To: WISPA General List
Subject: Re: [WISPA] TV Whitespace Comment Deadline Sept 16th. All
Tessco posted it to their Twitter and I saw it last night with only
like 200 views. It's taken off like a rocket.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
On 9/15/2010 10:27 AM, Justin Wilson wrote:
Mikrotik posted this on their Facebook post. I don't see
Need to be tied off at 6+ feet of vertical height and hard hat 1/2 the
distance from the tower from how high work is being done.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Sep 15, 2010 at 1:27 PM, Mike Hammett wispawirel...@ics-il.net
Yep, exactly!
Regards,
Chuck
On Wed, Sep 15, 2010 at 1:59 PM, Josh Luthman
j...@imaginenetworksllc.comwrote:
Need to be tied off at 6+ feet of vertical height and hard hat 1/2 the
distance from the tower from how high work is being done.
Josh Luthman
Office: 937-552-2340
Direct:
Released: 09/15/2010. WIRELINE COMPETITION BUREAU SEEKS COMMENT ON
BUSINESS BROADBAND MARKETPLACE. (DA No. 10-1743). (Dkt No 10-188 ).
Comments Due: 10/15/2010. Reply Comments Due: 11/04/2010. WCB .
Contact: Heather Hendrickson at (202) 418-7295, email: Heather
hendrick...@fcc.gov
Absolutely!
From: Mike Goicoechea [mailto:m...@cielosystems.net]
Sent: Wednesday, September 15, 2010 12:24 PM
To: 'Rick Harnish'
Subject: RE: [WISPA Members] TV Whitespace Comment Deadline Sept 16th. All
WISPsfile immediately.
Rick,
Is there any value for vendors to send a letter?
At 9/14/2010 02:11 PM, Jack Unger wrote:
FiberTower (and the mobile broadband industry) has been and still
is fighting hard to LICENSE 36-MHz wide chunks of TV White Space.
WISPA has been and is continuing to fight back hard against the
FiberTower Group proposal. If FiberTower is
This makes it sound like we're going to get what we want, that it's a
slam dunk. Am I reading it wrong?
http://www.cnn.com/2010/TECH/innovation/09/14/fcc.super.wifi/index.html?eref=mrss_igoogle_cnn
--
Randy Cosby| InfoWest, Inc | www.infowest.com
Vice President | 435-674-0165 x
Well, I think WISPA is saying that the FCC is working to release 750
MHz of spectrum for backhaul purposes. Let's keep this for PtMP. If
given sufficient power levels, this new backhaul spectrum should work
just fine.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Most likely it is the last 4 numbers of the serial number
On Wed, Sep 15, 2010 at 10:11 AM, Josh Luthman
j...@imaginenetworksllc.com wrote:
I could be wrong, but I think when I checked that once it was an
incorrect guess.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
It's a secret code that ATT techs can use to grab free wifi.
Just kidding.
Sent from my iPhone
On Sep 15, 2010, at 4:30 PM, Philip Dorr wirel...@judgementgaming.com wrote:
Most likely it is the last 4 numbers of the serial number
On Wed, Sep 15, 2010 at 10:11 AM, Josh Luthman
Or is he.
On Sep 15, 2010 5:39 PM, Jeremie Chism jchi...@gmail.com wrote:
It's a secret code that ATT techs can use to grab free wifi.
Just kidding.
Sent from my iPhone
On Sep 15, 2010, at 4:30 PM, Philip Dorr wirel...@judgementgaming.com
wrote:
Most likely it is...
Thats all. ATT is in our area and usually their routers say 2wire. Maybe
they changed now?
On Wed, Sep 15, 2010 at 5:14 AM, Jeromie Reeves jree...@18-30chat.netwrote:
Was that all that was in the essid? Qwest, 2wire, and a few others now
do that. They place the default essid and key on the
Better yet... Notice how its been removed from Youtube due to
copyright issues. Yeah right...
Randy Cosby wrote:
Notice how they blur the faces?
Respect for the dead. RIP.
Randy
On 9/15/2010 9:37 AM, Jerry Richardson wrote:
Makes my palms sweat just watching it
WTF isn't he
Any of the old timers have a copy of this old hag laying around?
Tnx
-B-
WISPA Wants You! Join today!
http://signup.wispa.org/
The hard hat rule is any time there is a chance of any injury to the
head. Some here should wear there helmet all the time! LOL!
-B-
Josh Luthman wrote:
Need to be tied off at 6+ feet of vertical height and hard hat 1/2 the
distance from the tower from how high work is being done.
Josh
Fred,
I think its always better to kill the virus before it catches on and
becomes a plague. The real question is would Fiber Tower support
WISPA's stance if they had no benefit. Probably not.
Not to be a pig but if it can all be unlicensed I would love that.
-B-
Fred Goldstein wrote:
At
Yeah. Cool dude and a VERY snappy dresser. He cleans up nice!
Bob-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Chris Cooper
Sent: Tuesday, September 14, 2010 10:21 PM
To: WISPA General List
Subject: Re: [WISPA] speed test
He is my father.
Didn't know they had a utility. Just connected serially through a terminal
emulator like HyperTerminal with one of those special cables...
If it's BreezeNET then you may not have telnet access to them. But you
should be able to serial into them...
- Original Message -
From: Bob
That's impressive as hell.
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Justin Wilson
Sent: Wednesday, September 15, 2010 11:10 AM
To: WISPA General List
Subject: Re: [WISPA] Tower mounting pics wanted!
110' in the ground? WOW!
--
Justin Wilson
Short enough for maintenance. I like.
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Justin Wilson
Sent: Wednesday, September 15, 2010 11:11 AM
To: WISPA General List
Subject: Re: [WISPA] Tower mounting pics wanted!
Attached is a pic of some simple
Affirmative on the negative.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Wednesday, September 15, 2010 11:11 AM
To: WISPA General List
Subject: Re: [WISPA] Wireless Router Types
I could be wrong, but I think
Yes. They actually made such a beast. I have the cable but the client
who has several units wants to manage them remotely. I would mage them
to the dumpster and buy some new Ubiquity to replace them
-B-
Mark Nash - Lists wrote:
Didn't know they had a utility. Just connected serially
It's aliens. I've met them and they want to eat us.
Was a secret but now not no mo'
Steve-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Jeremie Chism
Sent: Wednesday, September 15, 2010 5:39 PM
To: WISPA General List
Subject: Re:
A man who pays attention and lives to 90+
Good man!
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Chuck Hogg
Sent: Wednesday, September 15, 2010 2:40 PM
To: WISPA General List
Subject: Re: [WISPA] Tower Climb video
Yep, exactly!
Regards,
I double click all the way up. Tied up on two point s at all times. What
are they thinking
Nice example of luck.
He then goes to the local gas station and buys a winning lottery ticket.
Me.. I'd be wearing DIRT!
-Original Message-
From: wireless-boun...@wispa.org
OSHA? We don't need no stinkin' OSHSA!
(Self employed)
HA!
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Scott Carullo
Sent: Wednesday, September 15, 2010 12:39 PM
To: WISPA General List
Subject: Re: [WISPA] Tower Climb video
I must have
C R A Z Y!
Reminds me of some of those Afgan tower videos.
WTF is the first thing that comes to mind.
Then cheese puffs is the second. Only cause I'm jonesin' for junk food
Happens.
Bob-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
You need to console inwith the special cable and set the IP. Once it
has an IP you can telnet to it.
Jerry Richardson
Sent Mobile
On Sep 15, 2010, at 5:23 PM, Mark Nash - Lists markl...@uwol.net
wrote:
Didn't know they had a utility. Just connected serially through a
terminal
emulator
But the customer wants the utility. He doesn't want the easy way. he
does it that way now. AUGH!
Jerry Richardson wrote:
You need to console inwith the special cable and set the IP. Once it
has an IP you can telnet to it.
Jerry Richardson
Sent Mobile
On Sep 15, 2010, at 5:23 PM,
Ah,
I might (very slight chance) have the floppy somewhere in the shop.
I'll look.
Jerry Richardson
Sent Mobile
On Sep 15, 2010, at 6:56 PM, Bob Moldashel lakel...@gbcx.net wrote:
But the customer wants the utility. He doesn't want the easy way. he
does it that way now. AUGH!
If you do Jerry that would be great.
tnx
Jerry Richardson wrote:
Ah,
I might (very slight chance) have the floppy somewhere in the shop.
I'll look.
Jerry Richardson
Sent Mobile
On Sep 15, 2010, at 6:56 PM, Bob Moldashel lakel...@gbcx.net wrote:
But the customer wants the
http://www.theonlineengineer.org/TheOLEBLOG/
On Wed, Sep 15, 2010 at 11:27 AM, Justin Wilson li...@mtin.net wrote:
Mikrotik posted this on their Facebook post. I don’t see the guy
clipping off or a safety climb so don’t do as he does (unless I missed the
safety portion).
Sent offlist..
-Kevin
On Wed, Sep 15, 2010 at 8:17 PM, Bob Moldashel lakel...@gbcx.net wrote:
If you do Jerry that would be great.
tnx
Jerry Richardson wrote:
Ah,
I might (very slight chance) have the floppy somewhere in the shop.
I'll look.
Jerry Richardson
Sent Mobile
56 matches
Mail list logo